[Serusers] HELP Needed! SER Crashes.

[Aleksandr N/A]

Hi!
 
I have some problems with SER 0.8.14. When I'm trying AUTH modules, it crashes. (it says:
 
---------------------------------------------------------------------------------------------------

Starting SER : cat: /var/run/ser.pid: No such file or directory
started pid()

---------------------------------------------------------------------------------------------------
 
 My config is the following:
 
#
# $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $
#
# simple quick-start config script
#
 
# ----------- global configuration parameters ------------------------
 
#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
 
/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/
 
check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
 
# ------------------ module loading ----------------------------------
 
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
 
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
 
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
 
# ----------------- setting module-specific parameters ---------------
 
# -- usrloc params --
 
#modparam("usrloc", "db_mode",   0)
 
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
 
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
 
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
 
# -------------------------  request routing logic -------------------
 
# main routing logic
 
route{
 
 # initial sanity checks -- messages with
 # max_forwards==0, or excessively long requests
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  break;
 };
 if (len_gt( max_len )) {
  sl_send_reply("513", "Message too big");
  break;
 };
 
 # we record-route all messages -- to make sure that
 # subsequent messages will go through our proxy; that's
 # particularly good if upstream and downstream entities
 # use different transport protocol
 record_route(); 
 # loose-route processing
 if (loose_route()) {
  t_relay();
  break;
 };
 
 # if the request is for other domain use UsrLoc
 # (in case, it does not work, use the following command
 # with proper names and addresses in it)
 if (uri==myself) {
 
  if (method=="REGISTER") {
 
# Uncomment this if you want to use digest authentication
   if (!www_authorize("ignosya.dyndns.org", "subscriber")) {
    www_challenge("ignosya.dyndns.org", "0");
    break;
   };
 
   save("location");
   break;
  };
 
  # native SIP destinations are handled using our USRLOC DB
  if (!lookup("location")) {
   sl_send_reply("404", "Not Found");
   break;
  };
 };
 # forward to current uri now; use stateful forwarding; that
 # works reliably even if we forward from TCP to UDP
 if (!t_relay()) {
  sl_reply_error();
 };
 
}