[Serusers] Credentials with given realm not found

Thu Apr 14 14:02:41 CEST 2005

So Daniel like i understand the problem is my radius configuration,
another thing is that my ATA sending the same stuff, i mean if i will
change the sip server to different one where i installed freeradius
with ser it's working fine.

Daniel where i can start to fix that problem.?

Thank you very much for your time.

On 4/14/05, Alex <alexandergav at gmail.com> wrote:
> So Daniel like i understand the problem is my radius configuration,
> another thing is that my ATA sending the same stuff, i mean if i will
> change the sip server to different one where i installed freeradius
> with ser it's working fine.
> 
> Daniel where i can start to fix that problem.?
> 
> Thank you very much for your time.
> 
> 
> On 4/14/05, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
> > The second REGISTER (the block 3) must contains the response to the
> > authentication challenge carried by 401 reply (block 2). That means that
> > the block 3 must contain an Authorization header with authentication
> > credentials computed according to HTTP-Digest authentication mechanism
> > (RFC2617). Also, see the section 22.Usage of HTTP Authentication in SIP
> > RFC3261 for more about user authentication in SIP.
> >
> > Daniel
> >
> > On 04/14/05 13:16, Alex wrote:
> >
> > >Sorry Daniel , i didn't get that, I send here 4 blocks, 1 one is the
> > >register request the 2 is the reply from the server, 3 is the register
> > >request, 4 is the reply from the server. If you can please point me to
> > >the problem. Because like i see the 2 register requests (1,3 blocks)
> > >are the same.
> > >
> > >
> > >On 4/14/05, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
> > >
> > >
> > >>As you can see, the second REGISTER does not contain the authentication
> > >>credentials (No Authorization header) in response to 401 reply. So,
> > >>either you didn't configure the phone to authenticate or the Grandstream
> > >>HT286 1.0.5.18 is faulty.
> > >>
> > >>Daniel
> > >>
> > >>
> > >>On 04/14/05 12:35, Alex wrote:
> > >>
> > >>
> > >>
> > >>>Daniel thanks
> > >>>btw it's clean installation of Red Hat Enterprise Linux AS release 3
> > >>>ser-08.14 , freeradius-1.2  , radiusclient-4.8
> > >>>
> > >>>i am sending ngrep port 5060
> > >>>i have here 2 requests of register and the replies to register.
> > >>>
> > >>>
> > >>>xxx.xxx.xxx.xxx  - sipserverip
> > >>>telephoneip - ip where the call coming from
> > >>>Phonenumber - phone number
> > >>>
> > >>>--------------------------------------------------------------------------------------------------
> > >>>
> > >>>U telephoneip:10739 -> xxx.xxx.xxx.xxx:5060
> > >>> REGISTER sip:xxx.xxx.xxx.xxx SIP/2.0..Via: SIP/2.0/UDP
> > >>>telephoneip:10000;branch=z9hG4bK98514c3b052d7df6..From: "Test Alex" <
> > >>> sip:Phonenumber at xxx.xxx.xxx.xxx;user=phone>;tag=50673f1baca1958c..To:
> > >>><sip:Phonenumber at xxx.xxx.xxx.xxx;user=phone>..Contact: <sip
> > >>> :Phonenumber at telephoneip:10000;user=phone>..Call-ID:
> > >>>1cff1b8955b8fa5c at 10.0.0.4..CSeq: 106 REGISTER..Expires:
> > >>>3600..User-Agent
> > >>> : Grandstream HT286 1.0.5.18..Max-Forwards: 70..Allow:
> > >>>INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Lengt
> > >>> h: 0....
> > >>>#
> > >>>U xxx.xxx.xxx.xxx:5060 -> telephoneip:10000
> > >>> SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP
> > >>>telephoneip:10000;branch=z9hG4bK98514c3b052d7df6..From: "Test Alex"
> > >>><sip:Phonenumber at xxx.xxx.xxx.xxx;user=phone>;tag=50673f1baca1958c..To:
> > >>><sip:Phonenumber at xxx.xxx.xxx.xxx;user=phone>;tag=b27e1a1d33761e85846fc9
> > >>> 8f5f3a7e58.f894..Call-ID: 1cff1b8955b8fa5c at 10.0.0.4..CSeq: 106
> > >>>REGISTER..WWW-Authenticate: Digest realm="xxx.xxx.xxx.xxx", nonc
> > >>> e="425e3ac34dc9509392435c11fb260f41420049c7"..Server: Sip EXpress
> > >>>router (0.8.14 (i386/linux))..Content-Length: 0..Warning: 392
> > >>>  xxx.xxx.xxx.xxx:5060 "Noisy feedback tells:  pid=1912
> > >>>req_src_ip=telephoneip req_src_port=10739 in_uri=sip:xxx.xxx.xxx.xxx
> > >>> out_uri=sip:xxx.xxx.xxx.xxx via_cnt==1"....
> > >>>#
> > >>>
> > >>>U telephoneip:10740 -> xxx.xxx.xxx.xxx:5060
> > >>> REGISTER sip:xxx.xxx.xxx.xxx SIP/2.0..Via: SIP/2.0/UDP
> > >>>telephoneip:10000;branch=z9hG4bK98514c3b052d7df6..From: "Test Alex" <
> > >>> sip:Phonenumber at xxx.xxx.xxx.xxx;user=phone>;tag=50673f1baca1958c..To:
> > >>><sip:Phonenumber at xxx.xxx.xxx.xxx;user=phone>..Contact: <sip
> > >>> :Phonenumber at telephoneip:10000;user=phone>..Call-ID:
> > >>>1cff1b8955b8fa5c at 10.0.0.4..CSeq: 106 REGISTER..Expires:
> > >>>3600..User-Agent
> > >>> : Grandstream HT286 1.0.5.18..Max-Forwards: 70..Allow:
> > >>>INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE..Content-Lengt
> > >>> h: 0....
> > >>>#
> > >>>U xxx.xxx.xxx.xxx:5060 -> telephoneip:10000
> > >>> SIP/2.0 401 Unauthorized..Via: SIP/2.0/UDP
> > >>>telephoneip:10000;branch=z9hG4bK98514c3b052d7df6..From: "Test Alex"
> > >>><sip:Phonenumber at xxx.xxx.xxx.xxx;user=phone>;tag=50673f1baca1958c..To:
> > >>><sip:Phonenumber at xxx.xxx.xxx.xxx;user=phone>;tag=b27e1a1d33761e85846fc9
> > >>> 8f5f3a7e58.f894..Call-ID: 1cff1b8955b8fa5c at 10.0.0.4..CSeq: 106
> > >>>REGISTER..WWW-Authenticate: Digest realm="xxx.xxx.xxx.xxx", nonc
> > >>> e="425e3acb812b5b2e8aa023e3fcffc618dc4cf661"..Server: Sip EXpress
> > >>>router (0.8.14 (i386/linux))..Content-Length: 0..Warning: 392
> > >>>  xxx.xxx.xxx.xxx:5060 "Noisy feedback tells:  pid=1885
> > >>>req_src_ip=telephoneip req_src_port=10740 in_uri=sip:xxx.xxx.xxx.xxx
> > >>> out_uri=sip:xxx.xxx.xxx.xxx via_cnt==1"....
> > >>>#
> > >>>
> > >>>
> > >>>tell me if you need something else.
> > >>>
> > >>>
> > >>>On 4/14/05, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
> > >>>
> > >>>
> > >>>
> > >>>
> > >>>>Could you post the network dump with REGISTER/401/REGISTER messages? I
> > >>>>will take a look to see if something is wrong.
> > >>>>
> > >>>>
> > >>>>On 04/14/05 12:16, Alex wrote:
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>>Digest realm is the same for the register requests.
> > >>>>>furthermore the realm in To tag is correct.
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>Did you mean To URI instead of To tag?
> > >>>>
> > >>>>Daniel
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>
> > >>>>>what else it can be.
> > >>>>>Thanks for any help.
> > >>>>>
> > >>>>>On 4/14/05, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>>>>Watch the network traffic (ngrep or ethereal on port 5060) and check the
> > >>>>>>realm from 401 is the same as the one from next REGISTER.  Also, when
> > >>>>>>you use the empty realm parameter to radius_ww_authorize() and
> > >>>>>>www_challenge(), the realm is taken from To URI.
> > >>>>>>
> > >>>>>>Daniel
> > >>>>>>
> > >>>>>>
> > >>>>>>On 04/14/05 08:08, Alex wrote:
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>>Hi guys maybe someone can find the problem, i still can't see anything
> > >>>>>>>going to radius authentication. (the radius logs are empty)
> > >>>>>>>
> > >>>>>>>the register request is coming but it's not going to authenticate
> > >>>>>>>through the radius.
> > >>>>>>>Any help will be appreciated.
> > >>>>>>>
> > >>>>>>>here is the debug from ser :
> > >>>>>>>---------------------------------------------------------------------------------------------
> > >>>>>>>14(1036) parse_headers: flags=-1
> > >>>>>>>14(1036) check_via_address(62.219.158.191, 62.219.158.191, 1)
> > >>>>>>>14(1036) DEBUG:destroy_avp_list: destroing list (nil)
> > >>>>>>>14(1036) receive_msg: cleaning up
> > >>>>>>>9(1012) SIP Request:
> > >>>>>>>9(1012)  method:  <REGISTER>
> > >>>>>>>9(1012)  uri:     <sip:xxx.xxx.xxx.xxx>
> > >>>>>>>9(1012)  version: <SIP/2.0>
> > >>>>>>>9(1012) parse_headers: flags=1
> > >>>>>>>9(1012) Found param type 232, <branch> = <z9hG4bKfc5751413c832e6d>; state=16
> > >>>>>>>9(1012) end of header reached, state=5
> > >>>>>>>9(1012) parse_headers: Via found, flags=1
> > >>>>>>>9(1012) parse_headers: this is the first via
> > >>>>>>>9(1012) After parse_msg...
> > >>>>>>>9(1012) preparing to run routing scripts...
> > >>>>>>>9(1012) REGISTER: Authenticating user
> > >>>>>>>9(1012) parse_headers: flags=4
> > >>>>>>>9(1012) end of header reached, state=9
> > >>>>>>>9(1012) DEBUG: get_hdr_field: <To> [45];
> > >>>>>>>uri=[sip:phonenumber at xxx.xxx.xxx.xxx;user=phone]
> > >>>>>>>9(1012) DEBUG: to body [<sip:phonenumber at xxx.xxx.xxx.xxx;user=phone>
> > >>>>>>>]
> > >>>>>>>
> > >>>>>>>9(1012) parse_headers: flags=4096
> > >>>>>>>9(1012) get_hdr_field: cseq <CSeq>: <103> <REGISTER>
> > >>>>>>>9(1012) DEBUG: get_hdr_body : content_length=0
> > >>>>>>>9(1012) found end of header
> > >>>>>>>9(1012) pre_auth(): Credentials with given realm not found
> > >>>>>>>9(1012) REGISTER: challenging user
> > >>>>>>>9(1012) build_auth_hf(): 'WWW-Authenticate: Digest
> > >>>>>>>realm="xxx.xxx.xxx.xxx",
> > >>>>>>>nonce="425e063022afc1142ed6730d46da41692ff3ed57"
> > >>>>>>>
> > >>>>>>>_______________________________________________
> > >>>>>>>Serusers mailing list
> > >>>>>>>serusers at lists.iptel.org
> > >>>>>>>http://lists.iptel.org/mailman/listinfo/serusers
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>>>
> > >>>>>
> > >>>>>
> > >>>>>
> > >>>
> > >>>
> > >>>
> > >
> > >
> > >
> >
>