[Serusers] Messenger 5.1 Presence

[Klaus Darilion]

AFAIK nobody managed presence with versions >=5.0.
I guess the new versions only work with MS LCS Server.

regards,
klaus

Nigel Clarke wrote:
> Does Microsoft Messenger 5.1 have a problem with presence updates? I get 
> updates for 4.6 clients but not for 5.1.
>  
> ser.cfg is:
>  
> cat ser.cfg
> #
> # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $
> #
> # simple quick-start config script
> #
>  
> # ----------- global configuration parameters ------------------------
>  
> #debug=3         # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no        # (cmd line: -E)
>  
> /* Uncomment these lines to enter debugging mode 
> debug=4
> fork=no
> log_stderror=yes
> */
>  
> check_via=no    # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>  
> alias="xxx.com"
> alias="xxx.local"
> alias="sip.xxx.local"
>  
> # ------------------ module loading ----------------------------------
>  
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/lib/ser/modules/mysql.so"
>  
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
>  
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/lib/ser/modules/auth.so"
> loadmodule "/usr/lib/ser/modules/auth_db.so"
>  
> # ----------------- setting module-specific parameters ---------------
>  
> # -- usrloc params --
>  
> #modparam("usrloc", "db_mode",   0)
>  
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 1)
>  
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column", "password")
>  
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>  
> # -- registrar parameters
> modparam("registrar","default_expires",1800)
> modparam("registrar","use_domain",0)
>  
> # -------------------------  request routing logic -------------------
>  
> # main routing logic
>  
> route{
>  
>         # initial sanity checks -- messages with
>         # max_forwards==0, or excessively long requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 break;
>         };
>         if ( msg:len > max_len ) {
>                 sl_send_reply("513", "Message too big");
>                 break;
>         };
>  
>         # we record-route all messages -- to make sure that
>         # subsequent messages will go through our proxy; that's
>         # particularly good if upstream and downstream entities
>         # use different transport protocol
>         record_route();
>         # loose-route processing
>         if (loose_route()) {
>                 t_relay();
>                 break;
>         };
>  
>         # if the request is for other domain use UsrLoc
>         # (in case, it does not work, use the following command
>         # with proper names and addresses in it)
>         if (uri==myself) {
>  
>                 if (method=="REGISTER") {
>  
> # Uncomment this if you want to use digest authentication
> #                       if (!www_authorize("iptel.org", "subscriber")) {
> #                               www_challenge("iptel.org", "0");
> #                               break;
> #                       };
>  
>                         log(1,"request for register received");
>                         save("location");
>                         break;
>                 };
>  
>                 # native SIP destinations are handled using our USRLOC DB
>                 if (!lookup("location")) {
>                         sl_send_reply("404", "Not Found");
>                         break;
>                 };
>         };
>         # forward to current uri now; use stateful forwarding; that
>         # works reliably even if we forward from TCP to UDP
>         if (!t_relay()) {
>                 sl_reply_error();
>         };
>  
> }
>  
> 
> Regards,
> 
> Nigel
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers