[Serusers] avp_db_store

[Glenn Dalgliesh]

Thanks I need an avp_write to set a value

avp_write("on", "s:7879");
avp_db_store("$from/username","s:7879");



-----Original Message-----
From: Marian Dumitru [mailto:marian.dumitru at voice-sistem.ro] 
Sent: Tuesday, April 12, 2005 3:15 PM
To: Glenn Dalgliesh
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] avp_db_store

Hi Glenn

As first guess, you have different AVPs in load and save function - 
s:7879 and i:7879.
Second, why do you load and than save the same AVP without any 
modifications?

Best regards,
Marian

Glenn Dalgliesh wrote:
> I have almost all of the other parts of AVP functioning great but I can't
> seem to get avp_db_store to work from CVSHEAD. Below is an example and the
> debug. Not sure if it's my syntax or bug
> 
> Thanks for an help
> 
> if(uri=~"sip:\*78 at .*") {
>                         log(1, "LOG: Enable DND\n");
>                         avp_write("$to/username", "$to_id");
>                         avp_write("$from/username", "s:fromuser");
>                         avp_db_load("$from/username", "s:7879");
>                         avp_print();
>                         avp_db_store("$from/username","i:7879");
>                         rewritehostport ("xxx.yyy.83.5:5060");
>                         route(9);
>                         break;
>                 };
> 
> 
> 8(22938) DEBUG:avpops:load_avps: loaded avps = 1
>  8(22938) DEBUG:avpops:print_avp: p=0xb61a8340, flags=B
>  8(22938) DEBUG:			name=<7879>
>  8(22938) DEBUG:			val_str=<>
>  8(22938) DEBUG:avpops:print_avp: p=0xb61a82e4, flags=3
>  8(22938) DEBUG:			name=<fromuser>
>  8(22938) DEBUG:			val_str=<4107358551>
>  8(22938) DEBUG:avpops:print_avp: p=0xb61a82a0, flags=2
>  8(22938) DEBUG:			id=<57920>
>  8(22938) DEBUG:			val_str=<*78>
>  8(22938) DEBUG:avpops:store_avps: 0 avps were stored
> 

-- 
Voice System
http://www.voice-system.ro