[Serusers] NAT
harry gaillac
gaillacharry at yahoo.fr
Tue Apr 12 15:52:19 CEST 2005
Hello,
what's wrong in ser.cfg !!!!!!!!!!!
I use domain module with is_from_local() function but
phones can't register neither invite !!!!
I spend too much time with that project, may be i'm
stupid ???
Harry
--- "Greger V. Teigre" <greger at teigre.com> a écrit :
> Your attached ser.cfg does not use
> nathalper/rtpproxy.
> Using the right rtpproxy config file could help:
>
http://www.onsip.org/modules/mydownloads/visit.php?cid=13&lid=19
>
> Please note (as posted a couple of times already):
> That file has a small
> error that is in the works to be fixed.
> Between line 194 and 195, you need to insert:
> fix_nated_contact();
> g-)
>
> harry gaillac wrote:
> >> Hello,
> >>
> >> I read the howto frop onsip.org in order to set
> NAT
> >> with rtpproxy.
> >>
> >> I setup ser-0.9.0 rtpproxy from CVS it's ok .
> >>
> >>
> 192.168.0.0/24---FW+NAT---SER+rtpproxy------public
> >>
> network
> >>
> >> Here are my netfilter rules below :
> >>
> >> My two Polycom ip 300 (alice & bob) are able to
> >> register to ser but Subscribe/Notify via SIMPLE
> don't
> >> work !?
> >>
> >> When i try to call alice from bob or bob from
> alice
> >> ser
> >> reply 404 not found !!!!!!!
> >>
> >> I wasted much time with ethereal to find the
> solution.
> >>
> >> Thanks for help
> >>
> >> Harry -:(
> >>
> >>
> >> Chain INPUT (policy DROP 0 packets, 0 bytes)
> >> pkts bytes target prot opt in out
> source
> >> destination
> >> 1273 885K ACCEPT all -- * *
> >> 0.0.0.0/0 0.0.0.0/0 state
> >> RELATED,ESTABLISHED
> >> 7 429 ACCEPT all -- lo *
> >> 0.0.0.0/0 0.0.0.0/0 state
> NEW
> >> 70 4610 ACCEPT all -- eth0 *
> >> 192.168.0.0/24 0.0.0.0/0 state
> NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:80
> >> state NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:443
> >> state NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:21
> >> state NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:2401
> >> state NEW
> >> 0 0 ACCEPT udp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 udp
> dpt:53
> >> state NEW
> >> 0 0 ACCEPT udp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 udp
> dpt:123
> >> state NEW
> >> 0 0 ACCEPT icmp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 icmp
> type 0
> >> code 0 state NEW
> >> 0 0 ACCEPT icmp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 icmp
> type 8
> >> code 0 state NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:5060
> >> state NEW
> >> 0 0 ACCEPT udp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 udp
> dpt:5060
> >> state NEW
> >> 0 0 ACCEPT udp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 udp
> >> dpts:35000:65000 state NEW
> >> 678 32876 REJECT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0
> reject-with
> >> tcp-reset
> >> 26 1994 REJECT all -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0
> reject-with
> >> icmp-net-prohibited
> >>
> >> Chain FORWARD (policy DROP 0 packets, 0 bytes)
> >> pkts bytes target prot opt in out
> source
> >> destination
> >> 0 0 ACCEPT all -- * *
> >> 0.0.0.0/0 0.0.0.0/0 state
> >> RELATED,ESTABLISHED
> >> 0 0 ACCEPT all -- eth0 *
> >> 192.168.0.0/24 0.0.0.0/0 state
> NEW
> >> 0 0 ACCEPT all -- * eth0
> >> 192.168.0.0/24 0.0.0.0/0 state
> NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:80
> >> state NEW
> >> 0 0 ACCEPT tcp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:80
> >> state NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:443
> >> state NEW
> >> 0 0 ACCEPT tcp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:443
> >> state NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:21
> >> state NEW
> >> 0 0 ACCEPT tcp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:21
> >> state NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:2401
> >> state NEW
> >> 0 0 ACCEPT tcp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:2401
> >> state NEW
> >> 0 0 ACCEPT udp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 udp
> dpt:53
> >> state NEW
> >> 0 0 ACCEPT udp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 udp
> dpt:53
> >> state NEW
> >> 0 0 ACCEPT udp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 udp
> dpt:123
> >> state NEW
> >> 0 0 ACCEPT udp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 udp
> dpt:123
> >> state NEW
> >> 0 0 ACCEPT icmp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 icmp
> type 0
> >> code 0 state NEW
> >> 0 0 ACCEPT icmp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 icmp
> type 8
> >> code 0 state NEW
> >> 0 0 ACCEPT icmp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 icmp
> type 0
> >> code 0 state NEW
> >> 0 0 ACCEPT icmp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 icmp
> type 8
> >> code 0 state NEW
> >> 0 0 ACCEPT tcp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:5060
> >> state NEW
> >> 0 0 ACCEPT udp -- ppp0 *
> >> 0.0.0.0/0 0.0.0.0/0 udp
> dpt:5060
> >> state NEW
> >> 0 0 ACCEPT tcp -- * ppp0
> >> 0.0.0.0/0 0.0.0.0/0 tcp
> dpt:5060
> >> state NEW
> >> 0 0 ACCEPT udp -- * ppp0
>
=== message truncated ===
__________________________________________________________________
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails !
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ser.cfg
Type: application/octet-stream
Size: 6925 bytes
Desc: ser.cfg
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050412/97fd8806/attachment.obj>
More information about the sr-users
mailing list