[Serusers] about the account by the mysql

[Psyber]

    I'm not quite sure that I understand the question, but if you're
just looking to add entries to UsrLoc, you can use serctl.

--Psyber



On Apr 5, 2005 11:07 PM, gcc chentob <chentob_gcc at hotmail.com> wrote:
> Hello all,
>     I have a problem about how to add the account into the mysql(I can use
> SER control registy by mysql),I don't know how to write the sip.cfg to
> account users into the mysql, my sip.cif following :
>     #debug=3         # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no        # (cmd line: -E)
> 
> /* Uncomment these lines to enter debugging mode
> debug=3
> fork=no
> log_stderror=yes
> */
> 
> check_via=no    # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> 
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> #modparam("usrloc", "db_mode",   0)
> 
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
> 
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> #modparam("rr", "enable_full_lr", 1)
> modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
> modparam("acc", "log_level", 2)
> modparam("acc", "log_flag", 2)
> modparam("acc", "db_flag", 1)
> modparam("acc", "db_missed_flag", 3)
> 
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> 
> route{
> 
>        # initial sanity checks -- messages with
>        # max_forwards==0, or excessively long requests
>        if (!mf_process_maxfwd_header("10")) {
>                sl_send_reply("483","Too Many Hops");
>                break;
>        };
>        if ( msg:len > max_len ) {
>                sl_send_reply("513", "Message too big");
>                break;
>        };
> 
>        # we record-route all messages -- to make sure that
>        # subsequent messages will go through our proxy; that's
>        # particularly good if upstream and downstream entities
>        # use different transport protocol
>        record_route();
>        # loose-route processing
>        if (loose_route()) {
>                t_relay();
>                break;
>        };
> 
>        # if the request is for other domain use UsrLoc
>        # (in case, it does not work, use the following command
>        # with proper names and addresses in it)
>        #if (uri=="mydomain.com") {
>           if (method=="INVITE")
>            {
>              setflag(1);
>             }
>                if (method=="REGISTER") {
> 
> # Uncomment this if you want to use digest authentication
>                        if (!www_authorize("127.0.0.1", "subscriber")) {
>                                www_challenge("127.0.0.1", "0");
>                                break;
>                        };
> 
>                        save("location");
>                        break;
>                };
> 
>                # native SIP destinations are handled using our USRLOC DB
>                if (!lookup("location")) {
>                        sl_send_reply("404", "Not Found");
>                        break;
>                };
>        #};
>        # forward to current uri now; use stateful forwarding; that
>        # works reliably even if we forward from TCP to UDP
> 
>        if (!t_relay()) {
>                sl_reply_error();
>        };
> 
> }
>    Thank you!
> 
> _________________________________________________________________
> Don't just search. Find. Check out the new MSN Search!
> http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>