[Serusers] GAteway 1760
Klaus Darilion
klaus.mailinglists at pernau.at
Fri Apr 8 10:26:53 CEST 2005
Hi!
Probably the ser.cfg (the part where you forward to the gateway) and
some SIP traces (ngrep) would help to debug the problem.
regards,
klaus
Miquel wrote:
> Hello,
>
> I have a problem with the gateway cisco 1760. I make a capture and the
> arrive to the gateway but this say me "BAD REQUEST -IP invalid" and I
> don't what to do
>
> My configuration is:
> Using 1454 out of 29688 bytes
> !
> version 12.2
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname ToIP
> !
> !
> username GW password 0 GW
> ip subnet-zero
> !
> !
> ip name-server 172.17.1.20
> !
> !
> isdn switch-type basic-net3
> isdn voice-call-failure 0
> !
> voice call carrier capacity active
> !
> voice class codec 1
> !
> ip name-server 172.17.1.20
> !
> !
> isdn switch-type basic-net3
> isdn voice-call-failure 0
> !
> voice call carrier capacity active
> !
> voice class codec 1
> codec preference 1 g723r63
> codec preference 2 g723ar63
> codec preference 3 g729br8
> codec preference 4 g729r8
> codec preference 5 g711alaw
> codec preference 6 g711ulaw
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface FastEthernet0/0
> description Line
> ip address 172.17.1.2 255.255.255.0
> speed auto
> !
>
> !
> !
> !
> !
> interface FastEthernet0/0
> description Line
> ip address 172.17.1.2 255.255.255.0
> speed auto
> !
> interface BRI0/0
> description RDSI 932531082
> no ip address
> isdn switch-type basic-net3
> !
> interface BRI0/1
> description RDSI 932531081
> no ip address
> shutdown
> isdn switch-type basic-net3
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 172.17.1.1
> no ip http server
> ip pim bidir-enable
> !
> !
> !
> call rsvp-sync
> !
> voice-port 0/0
> compand-type a-law
> cptone ES
> no ip http server
> ip pim bidir-enable
> !
> !
> !
> call rsvp-sync
> !
> voice-port 0/0
> compand-type a-law
> cptone ES
> !
> voice-port 0/1
> compand-type a-law
> cptone ES
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 100 pots
> description 932531081
> destination-pattern .........
> no digit-strip
> port 0/0
> !
> dial-peer voice 200 voip
> session target sip-server
> !
> sip-ua
> retry invite 3
> retry response 3
> retry bye 3
> retry cancel 3
>
> !
> dial-peer voice 200 voip
> session target sip-server
> !
> sip-ua
> retry invite 3
> retry response 3
> retry bye 3
> retry cancel 3
> timers trying 1000
> sip-server ipv4:172.17.1.20:5060
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> exec-timeout 0 0
> login
> !
> ntp clock-period 17179997
> ntp server 130.206.42.224
> end
>
> Thanks.
>
>
More information about the sr-users
mailing list