[Serusers] still no help - usrloc synchronization
Greger V. Teigre
greger at teigre.com
Thu Apr 7 08:30:48 CEST 2005
Have you tried to forward_tcp("address","port"); example in the other thread going on?
g-)
---- Original Message ----
From: Tina
To: Greger V. Teigre ; Matt Schulte
Cc: serusers at lists.iptel.org
Sent: Wednesday, April 06, 2005 09:24 PM
Subject: Re: [Serusers] still no help - usrloc synchronization
> Yep, it didn't help
>
> REGISTER++++fixing contact and port
> Fix contact: Insert buf - sip:tuka at 192.168.25.113:5060
> 6(1305) ERROR: t_newtran: transaction already in process 0x28361068
>
> "Greger V. Teigre" <greger at teigre.com> wrote:
> The error means that t_newtran has been run while an existing
> transaction is still in the workings. Have you tried moving your
> save() to *before* the t_replicate()?
> g-)
>
> ---- Original Message ----
> From: Tina
> To: Matt Schulte
> Cc: serusers at lists.iptel.org ; greger at teigre.com
> Sent: Tuesday, April 05, 2005 05:00 PM
> Subject: RE: [Serusers] still no help - usrloc synchronization
>
>> Thanks a lot, gentelmens!
>>
>> I have jumped to the same conclusion. The only thing I am worried -
>> t_replicate() creates aditional SIP traffic between sers. And I also
>> get some strange error with each REGISTER:
>>
>> 1(712) ERROR: t_newtran: transaction already in process 0x28336768
>>
>> Don't have any idea what I am doing wrong....
>>
>> Below is my ser.cfg snippet.
>> As far as you see I am using mediaproxy package to solve NAT issues.
>> I always force relay, cause I had nathelper problems with
>> UAC1->ser->NAT->UAC2 configuration.
>> I am going to test new mediaproxy release.
>> BRs,
>> Tina
>>
>>
>> !
>> ============================
>>
>> . . .
>> # ------------------------- request routing logic
>> ------------------- # main routing logic
>> route{
>> #-------------------------------------------------------
>> if (!method=="REGISTER") record_route();
>> #-------------------------------------------------------????????????????????
>> # loose-route processing
>> if (loose_route()) {
>> route(8); #--go to mediaproxy processing
>> break;
>> };
>> ...
>> if (method=="REGISTER") {
>> #------Replicate to the peers
>>
>> #---Ser 1
>> if (!src_ip==192.168.25.103)
>> t_replicate("192.168.25.103","5060");
>> #---Ser 2
>> if (!src_ip==192.168.25.115)
>> t_replicate("192.168.25.115","5060");
>>
>> save ("location");
>> break;
>> };
>> #-----------------------------------------------INVITE
>> if (method=="INVITE") {
>> log (1, "INVITE: Radius Accounting\n");
>> t_on_failure("4"); #---voice mail
>> use_media_proxy();
>> t_on_reply("5"); #--mediaproxy
>> };
>> #--------------------------------------------------BYE
>> if (method=="BYE" || method=="CANCEL") {
>> log (1, "BYE or CANCEL: Radius Accounting\n");
>> };
>> #---------------------------------------------------
>> if (!lookup("location") && !lookup("aliases")) {
>> sl_send_reply("404", "Not Found");
>> break;
>> };
>> if (!t_relay()) {
>> sl_reply_error();
>> };
>> }
>>
>> #-------------------------------------------------------
>> failure_route[4]{
>> if (t_check_status("408|486")){
>> append_hf("P-hint: Rewrited to VM");
>> rewritehostport("192.168.25.116:5060");
>> append_branch();
>> t_relay();
>> break;
>> };
>> }
>> #---------------------------------------------------------
>> onreply_route[5]{
>> if (status =~ "(183)|2[0-9][0-9]" && !search("^Content-Length:\
>> 0")) {
>> if ( (!(src_ip=="SERVER1"))
>> && (!(src_ip=="SERVER2"))
>> && (!(src_ip=="SERVER3")) ){
>> if ( search("c=IN IP4 192.168.*")||search("c=IN IP4
>> 10.*")||search("c=IN IP4 172.16.*") ) {
>> fix_contact();
>> };
>> };
>> use_media_proxy();
>> }
>> }
>>
>> ===================================================
>>
>> Matt Schulte <mschulte at netlogic.net> wrote:
>> I'm starting to lean this direction, using t_replicate and all. I
>> could
>> never get usrloc (db mode) to function properly.. t_replicate is a
>> dirty
>> but very effective workaround.
>>
>> -----Original Message-----
>> From: Greger V. Teigre [mailto:greger at teigre.com]
>> Sent: Saturday, April 02, 2005 1:33 AM
>> To: kramarv at yahoo.com
>> Cc: serusers at lists.iptel.org
>> Subject: Re: [Serusers] still no help - usrloc synchronization
>>
>>
>> Have a look at this thread:
>> http://lists.iptel.org/pipermail/serusers/2005-January/014669.html
>> g-)
>>
>> Java Rockx wrote:
>>> Tina,
>> ! >
>>> I thought I saw you post the other day that you did not want to use
>>> t_replicate(), however, this is probably your best bet to getting
>>> this
>>
>>> to work, IMHO.
>>>
>>> Regards,
>>> Paul
>>>
>>> On Apr 1, 2005 4:08 PM, Tina wrote:>>
>>>> Hi, please help me, I'm stuck with it!!!!!
>>>> I am trying to set up several sers with a shared MySQL database for
>>>> location service.
>>>>
>>>> I set in each ser.cfg:
>>>>
>>>> modparam("usrloc", "db_mode", 2)
>>>> modparam("usrloc",
>>>> "db_url","sql://ser:heslo@192.168.25.163/ser")
>>>>
>>>> and the servers are not synchronized.
>>>> The I set
>>>> modparam("usrloc", "db_mode", 2)
>>>>
>>>>
>>>> made UAC (Xlite) register to one of the servers.
>>> &g! t; I see it via usrloc, but there is no record in "location"
>>> mySQL
>>>> table....So others do not see the client and I'm unable to make
>>>> calls....
>>>>
>>>>
>>>> Please help how to work with usrloc and mySQL...
>>>>
>>>> Tina,
>>>> software engineer
>>>>
>>>> ________________________________
>>>> Do you Yahoo!?
>>>> Better first dates. More second dates. Yahoo! Personals
>>>>
>>>>
>>>> _______________________________________________
>>>> Serusers mailing list
>>>> serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>>>>
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Serusers mailing list
>>> serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>>
>> _______________________________________________
>> Serusers mailing list
>> serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>>
>> Do you Yahoo!?
>> Yahoo! Mail - Find what you need with new enhanced search. Learn
>> more.
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20050407/6a5bf80b/attachment.htm>
More information about the sr-users
mailing list