[Serusers] RE: ser cpl-c, dont work fine!

[Christopher Crawford]

Can you send a trace of the REGISTER message with the cpl script in the
body?

Upon uploading a cpl script that is in the body of the message, REGISTER
requires the following header:

Content-Type: application/cpl+xml

When downloading a cpl script, the REGISTER requires the following
header:

Accept: application/cpl+xml  or *

Chris

> -----Original Message-----
> From: jacky [mailto:jacklyman at sohu.com]
> Sent: Thursday, September 23, 2004 9:56 PM
> To: Christopher Crawford
> Cc: serusers at lists.iptel.org
> Subject: ser cpl-c, dont work fine!
> 
> help!
> 
> I builded ser from cvs.  installed cpl-c module.  Use followed command
for
> ser subscriber
> 
> /usr/local/sbin/serctl fifo LOAD_CPL 100001 at 10.0.0.77  /tmp/test.xml
> 
> serctl print OK.
> 
> database table cpl:
> -----------------------
> | 100001 at 10.0.0.77 | <?xml version="1.0" encoding="UTF-8"?>
> 
> <!DOCTYPE cpl PUBLIC '-//IETF//DTD RFCxxxx CPL 1.0//EN' 'cpl.dtd'>
> 
> <cpl>
>   <incoming>
>     <location url="sip:100002 at 10.0.0.77">
>       <redirect/>
>     </location>
>   </incoming>
> </cpl>
> -----------------------
> 
> in my ser.cfg:
> 
> -----------------------------------------------------------
>                         log(1, "About to register cpl script\n");
>                         # register cpl
>                         if(!cpl_process_register()) {
>                                 log(1, "Error: fail cpl
registering\n");
>                                 break;
>                         }
> -----------------------------------------------------------
> 
> but when I use ua 100003 call 100001, 100001 ring not 100002.  and in
ser
> log file, can find "About to register cpl script",  not "Error: fail
cpl
> registering".
> 
> 
> So I dont know I can do what or  debug it. please help me!