[Serusers] SER behind NAT

[Martin W Jørgensen]

Hi.

I have a problem connecting to my SER server.
Whenever i try to connect to it, i get the following dump in the SER 
server console.
Can anyone tell me what's wrong?

 0(2542) receive_msg: cleaning up
 0(2542) SIP Request:
 0(2542)  method:  <REGISTER>
 0(2542)  uri:     <sip:192.168.0.50>
 0(2542)  version: <SIP/2.0>
 0(2542) parse_headers: flags=1
 0(2542) end of header reached, state=5
 0(2542) parse_headers: Via found, flags=1
 0(2542) parse_headers: this is the first via
 0(2542) After parse_msg...
 0(2542) preparing to run routing scripts...
 0(2542) DEBUG : is_maxfwd_present: searching for max_forwards header
 0(2542) parse_headers: flags=128
 0(2542) DEBUG: is_maxfwd_present: value = 70
 0(2542) parse_headers: flags=8
 0(2542) DEBUG: add_param: tag=34a5cdda18b149aea3333cb92c50bc91
 0(2542) DEBUG: add_param: epid=acbf1993e6
 0(2542) end of header reached, state=29
 0(2542) parse_headers: flags=256
 0(2542) end of header reached, state=9
 0(2542) DEBUG: get_hdr_field: <To> [31]; uri=[sip:PowerBlade at 192.168.0.50]
 0(2542) DEBUG: to body [<sip:PowerBlade at 192.168.0.50>
]
 0(2542) get_hdr_field: cseq <CSeq>: <1> <REGISTER>
 0(2542) DEBUG: get_hdr_body : content_length=0
 0(2542) found end of header
 0(2542) find_first_route(): No Route headers found
 0(2542) loose_route(): There is no Route HF
 0(2542) check_self - checking if host==us: 12==12 &&  [192.168.0.50] == 
[192.168.0.50]
 0(2542) check_self - checking if port 5060 matches port 5060
0(2542) parse_headers: flags=4096
 0(2542) pre_auth(): Credentials with given realm not found
 0(2542) build_auth_hf(): 'WWW-Authenticate: Digest 
realm="192.168.0.50", nonce="4145cb7f15b61c15276dd55d618a341155bd2de7"
'
 0(2542) parse_headers: flags=-1
 0(2542) check_via_address(62.243.128.27, 192.168.1.6, 0)
 0(2542) DEBUG:destroy_avp_list: destroing list (nil)