[Serusers] SER Running fine - Users Registered but can't see each other!!
Darren O'Donohoe
darren at webtalk.ie
Fri Oct 29 17:24:39 CEST 2004
Hi There everyone,
I have a wierd one for you! I have SER 8-12.0 running on redhat 9 i386.
MySQL and Ser MySQL are installed and working. Authentication works fine
The problem is that none of my users can call each other (via X-lite) or see each other on Messenger!
I have two Win 2000 client machines each running xlite and MS Messenger both registered okay.
UL list shows the following (Numeric aor's are the XLite and Named aor are from Messenger) In this example both machines are behind the same NAT firewall but it's the same if I take on of the clients onto a seperate direct internet connection.
Ser.cfg is below also
Anyone seen this before?
Thanks for your help!
Darren
[root at gandalf root]# serctl ul show
Dumping all contacts may take long: are you sure you want to proceed? [Y|N] y
===Domain list===
---Domain---
name : 'location'
size : 512
table: 0x422b65f8
d_ll {
n : 4
first: 0x422b88c0
last : 0x422b8858
}
...Record(0x422b88c0)...
domain: 'location'
aor : 'carol'
~~~Contact(0x422b8900)~~~
domain : 'location'
aor : 'carol'
Contact: 'sip:192.168.1.3:6947;transport=tcp'
Expires: 3528
q : 0.00
Call-ID: 'fcea449f7e5d44b7a771532a25b503f9 at 192.168.1.3'
CSeq : 2
replic : 0
State : CS_SYNC
Flags : 0
next : (nil)
prev : (nil)
~~~/Contact~~~~
.../Record...
...Record(0x422b86e8)...
domain: 'location'
aor : '35315550002'
~~~Contact(0x422b8730)~~~
domain : 'location'
aor : '35315550002'
Contact: 'sip:35315550002 at 213.94.241.163:5060'
Expires: 55
q : 0.00
Call-ID: '3DE292F416D24680935A388546142A90 at webtalk.ie'
CSeq : 9927
replic : 0
State : CS_DIRTY
Flags : 0
next : (nil)
prev : (nil)
~~~/Contact~~~~
.../Record...
...Record(0x422b87d8)...
domain: 'location'
aor : '35315550001'
~~~Contact(0x422b8818)~~~
domain : 'location'
aor : '35315550001'
Contact: 'sip:35315550001 at 192.168.1.1:5060'
Expires: 31
q : 0.00
Call-ID: '75A9644B8C15443EA76FE9DE8C93F6EE at webtalk.ie'
CSeq : 18470
replic : 0
State : CS_NEW
Flags : 0
next : (nil)
prev : (nil)
~~~/Contact~~~~
.../Record...
...Record(0x422b8858)...
domain: 'location'
aor : 'darren'
~~~Contact(0x422b8648)~~~
domain : 'location'
aor : 'darren'
Contact: 'sip:192.168.1.1:8659;transport=tcp'
Expires: 3590
q : 0.00
Call-ID: 'b07cccb850204540b16bb26fea6b8ff9 at 192.168.1.1'
CSeq : 2
replic : 0
State : CS_NEW
Flags : 0
next : (nil)
prev : (nil)
~~~/Contact~~~~
.../Record...
---/Domain---
===/Domain list===
[root at gandalf root]#
My ser.cfg is basically as per the 'How To' Document see below
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
# listening IP's
listen=213.168.225.230
listen=127.0.0.1
# hostname aliases
alias="webtalk.ie"
alias="gandalf.webtalk.ie"
alias=213.168.225.230
#Uncomment these lines to enter debugging mode
debug=7
fork=yes
log_stderror=yes
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/nathelper.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
# Uncomment this if you want to use Memory Storage only and
# comment the next line
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
modparam("auth_db", "calculate_ha1", yes)
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("webtalk.ie", "subscriber")) {
www_challenge("webtalk.ie", "0");
break;
};
save("location");
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20041029/182776da/attachment.htm>
More information about the sr-users
mailing list