[Serusers] a problem about module jabber

[Daniel-Constantin Mierla]

Have you compiled and installed the jabber module? It is not compiled by
default. If you did it, then run ser in debug mode (set debug=9 and
log_stderror=yes in your config file) and send the output to me.

Daniel

On 10/25/04 07:28, C Y wrote:

> Hi everyone:
>
> I have a problem when I configure the SIP server.
> I add the clause "loadmodule "/usr/local/lib/ser/modules/jabber.so""
> into the file "ser.cfg". And run "ser stop" or "ser start".There is a
> error: "ERROR: bad config file (1 errors)".
> Why I cannot load the module "jabber.so" and where can I find some
> infomation about module jabber.so?
>
> These are some informations related to my setting and problem:
> 1、operating system:Linux 7.0
> 2、SER distribution: ser-0.8.14_linux_i386.tar.gz
> 3、SER build: version: 0.8.14 (i386/linux)
> flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK,
> SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT
> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
> MAX_URI_SIZE 1024, BUF_SIZE 65535
> @(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $
> main.c compiled on 12:28:01 Jul 27 2004 with gcc 2.95
> 4、SER configuration file :
> #
> # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=no # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode debug=7
> fork=yes
> log_stderror=no
> */
>
> check_via=yes # (cmd. line: -v)
> dns=yes # (cmd. line: -r)
> rev_dns=yes # (cmd. line: -R)
> port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>
> alias="voipv6.edu.cn" "210.25.130.252" "localhost"
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>
>
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> loadmodule "/usr/local/lib/ser/modules/exec.so"
> loadmodule "/usr/local/lib/ser/modules/group.so"
> loadmodule "/usr/local/lib/ser/modules/msilo.so"
> loadmodule "/usr/local/lib/ser/modules/print.so"
> loadmodule "/usr/local/lib/ser/modules/textops.so"
> #loadmodule "/usr/local/lib/ser/modules/jabber.so"
> loadmodule "/usr/local/lib/ser/modules/uri.so"
> loadmodule "/usr/local/lib/ser/modules/vm.so"
>
>
> # ----------------- setting module-specific parameters ---------------
>
> modparam("usrloc","db_url","sql://ser:heslo@localhost/ser")
>
>
> # -- usrloc params --
>
> # Uncomment this if you want to use SQL database # for persistent
> storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this
> config), # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> if (!www_authorize("voipv6.edu.cn", "subscriber")) {
> www_challenge("voipv6.edu.cn", "0");
> break;
> };
>
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> }
>
> _________________________________________________________________
> 免费下载 MSN Explorer: http://explorer.msn.com/lccn
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>