[Serusers] AU can't login after enabling Authentication with MySQL

Mohamed Omar amatek2004 at yahoo.ca
Mon Oct 18 05:52:33 CEST 2004


I have been trying to install SER  and configure it to use authentication for the past two weeks with very little success. My two IPPhone can work with SER if I dont enable Authentication.  
 
The installation for both the SER and SER_Mysql went fine with no error.  I was able to run ser_mysql.sh create to create SER database.  I did change the Mysql root password.  I change DEFAULT_PW=heslo prerameter to DEFAULT_PW=mysqlrootpasword on ser_mysql.sh file before I issued the create command.
 
am able to create users using serctl without any issue too.
 
here is my current ser.cfg
 
Please Help. 
 
Thanks
 
 
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)
alias=192.168.77.151
alias=sipproxy.amatek.net
alias=amatek.net
alias=sipproxy
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode",   0)
 
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line

modparam("usrloc", "db_mode", 2)
 
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# -------------------------  request routing logic -------------------
# main routing logic
route{
        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };
        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        record_route();
        # loose-route processing
        if (loose_route()) {
                t_relay();
                break;
        };
        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {
                if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
                        if (!www_authorize("sipproxy.amatek.net", "subscriber")) {
                                www_challenge("sipproxy.amatek.net", "0");
                                break;
                        };
                        save("location");
                        break;
                };
                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        if (!t_relay()) {
                sl_reply_error();
        };
}
~
 



---------------------------------
Post your free ad now! Yahoo! Canada Personals
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20041017/84aa92f1/attachment.htm>


More information about the sr-users mailing list