[Serusers] CPL error
lakmal silva
ruwan_lakmal at yahoo.fr
Fri Oct 8 08:03:16 CEST 2004
Hi all,
I'm using ser 0.8.12 and trying to work with cpl-c
module. I'm getting the following error when trying to
start ser. Any ideas? Thanks in advance.
regards,
Lakmal
----------------------------------------------------
Oct 8 13:50:14 sip1 ser: WARNING: could not rev.
resolve 10.65.94.34
Oct 8 13:50:14 sip1 ser[10347]: mod_init(): Database
connection opened successfuly
Oct 8 13:50:14 sip1 ser[10347]: CPL - initializing
Oct 8 13:50:14 sip1 ser[10347]:
ERROR:cpl-c:init_CPL_parser: DTD not parsed
successfully
Oct 8 13:50:14 sip1 ser[10347]: ERROR:cpl_init:
init_CPL_parser failed!
Oct 8 13:50:14 sip1 ser[10347]: init_mod(): Error
while initializing module cpl-c
Oct 8 13:50:14 sip1 ser[10347]: INFO:cpl_c:cpl_exit:
aux process hasn't been created -> nothing to kill :-(
-------------------------------------------------------
My ser.cfg is as follows.
#
# $Id: ser.cfg,v 1.24 2003/11/11 15:32:36 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
# log into /var/log/messages
debug=9 # debug level (cmd line:
-dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# Additional Alias
alias="sip.xx.xx"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
# CPL-C module
loadmodule "/usr/local/lib/ser/modules/cpl-c.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters
---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# -- cpl-c params --
modparam("cpl-c","cpl_db","mysql://xxxx:xxxx@localhost/ser")
modparam("cpl-c","cpl_table","cpl")
modparam("cpl-c","cpl_dtd_file","/usr/local/etc/ser/cpl-06.dtd")
modparam("cpl-c","log_dir","/var/log/ser/cpl")
modparam("cpl-c","proxy_recurse",2)
modparam("cpl-c","proxy_route",1)
modparam("cpl-c","lookup_domain","location")
# -- timer settings --
modparam("tm","noisy_ctimer",1) # this will force
timeout
modparam("tm","fr_inv_timer",30) # sets the timeout
for INVITE to 30 sec (default is 120)
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks -- messages with
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (msg:len >= max_len ) {
sl_send_reply("513", "Message too
big");
break;
};
# we record-route all messages -- to make sure
that
# subsequent messages will go through our
proxy; that's
# particularly good if upstream and downstream
entities
# use different transport protocol
if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should
take the
# path determined by record-routing
if (loose_route()) {
# mark routing logic in request
append_hf("P-hint: rr-enforced\r\n");
route(1);
break;
};
if (!uri==myself) {
# mark routing logic in request
append_hf("P-hint: outbound\r\n");
route(1);
break;
};
# if the request is for other domain use
UsrLoc
# (in case, it does not work, use the
following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want
to use digest authentication
if
(!www_authorize("sip.xx.xx", "subscriber")) {
www_challenge("sip1.xx.xx", "0");
# handle REGISTER messages containing a CPL script
cpl_process_register();
save("location");
break;
};
# process CPL script
log("cpl: start script processing
now");
cpl_run_script("incoming","FORCE_STATEFUL");
log("cpl: script processing has been
finished");
lookup("aliases");
if (!uri==myself) {
append_hf("P-hint: outbound
alias\r\n");
route(1);
break;
};
# native SIP destinations are handled
using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not
Found");
break;
};
};
append_hf("P-hint: usrloc applied\r\n");
route(1);
}
route[1]
{
# send it out now; use stateful forwarding as
it works reliably
# even for UDP2TCP
if (!t_relay()) {
sl_reply_error();
};
}
Vous manquez d’espace pour stocker vos mails ?
Yahoo! Mail vous offre GRATUITEMENT 100 Mo !
Créez votre Yahoo! Mail sur http://fr.benefits.yahoo.com/
Le nouveau Yahoo! Messenger est arrivé ! Découvrez toutes les nouveautés pour dialoguer instantanément avec vos amis. A télécharger gratuitement sur http://fr.messenger.yahoo.com
More information about the sr-users
mailing list