[Serusers] Problem with specific phones only able to registerto ipnumber andnotdomain..
Marian Dumitru
marian.dumitru at voice-sistem.ro
Tue Nov 2 18:35:08 CET 2004
Hi Alex,
The subst() cannot fix the problem. If you use it to alter the To
header, you will have to forward the message to your self to allow the
modifications to take place (for each message SER keeps the original
message and a list of changes which are applied only when sending out he
message). Even if you modify the To hdr and spiral the message back to
you, you will have to catch the reply to undo the modification on To -
otherwise, the UAC will no be able to match the reply with the request
it sent. And to be able to catch the reply you need to use tm, but you
cannot do so because the transaction will be broken because of the
modified To hdr. I hope my words make some sens to you :-).
there is a way, but very ugly and inefficient - try lookup using both
forms user at ip and user at domain:
if (!lookup("location)) {
# try to replace domain with IP or IP with domain
if ( subst_uri("/(sip:.*@)mydomain\.com(;.*)/\1xxx.xxx.xxx.xxx\2/") ||
subst_uri("/(sip:.*@)xxx\.xxx\.xxx(;.*)\.xxx/\1mydomain.com\2/") ) {
if (!lookup("location")) {
# not found
}
}
}
I haven't test this, it's just an idea.
Best regards,
Marian Dumitru
Alex Mack wrote:
> Hi!
>
> Tanks for the answer. subst() did work but obviously didn't solve the
> problem.
>
> Below is the debug trace for the subst and a snippet from the used
> ser.cfg. As you can see, subst works good, but ser still stores
> xx at 100.100.100.100 as aor. Maybe my regex isn't good enough? Maybe the
> approach is wrong at all if ser extracts the vital header information
> already before entering the routing script at all.
>
> (IPs in the dumps are replaced, ser is 100.100.100.100, phone is
> 100.100.100.131, domain is mydomain.org)
>
> 0(8293) method: <REGISTER>
> 0(8293) uri: <sip:100.100.100.100:5060>
> 0(8293) version: <SIP/2.0>
> 0(8293) parse_headers: flags=1
> 0(8293) end of header reached, state=5
> 0(8293) parse_headers: Via found, flags=1
> 0(8293) parse_headers: this is the first via
> 0(8293) After parse_msg...
> 0(8293) preparing to run routing scripts...
> 0(8293) parse_headers: flags=128
> 0(8293) end of header reached, state=9
> 0(8293) DEBUG: get_hdr_field: <To> [48]; uri=[sip:31 at 100.100.100.100:5060]
> 0(8293) DEBUG: to body ["optiPoint 1 (31)" <sip:31 at 100.100.100.100:5060>
> ]
> 0(8293) get_hdr_field: cseq <CSeq>: <2012717775> <REGISTER>
> 0(8293) DEBUG: get_hdr_body : content_length=0
> 0(8293) found end of header
> 0(8293) DEBUG: is_maxfwd_present: max_forwards header not found!
> 0(8293) parse_headers: flags=256
> 0(8293) find_first_route(): No Route headers found
> 0(8293) loose_route(): There is no Route HF
> 0(8293) grep_sock_info - checking if host==us: 13==13 &&
> [100.100.100.100] == [100.100.100.100]
> 0(8293) grep_sock_info - checking if port 5060 matches port 5060
> 0(8293) grep_sock_info - checking if host==us: 13==13 &&
> [100.100.100.100] == [100.100.100.100]
> 0(8293) grep_sock_info - checking if port 5060 matches port 5060
> 0(8293) #### Authenticate ###
> 0(8293) check_nonce(): comparing
> [4187b4fa25e5e432b9e0bd204a429446c2a3ae9b] and
> [4187b4fa0e8bde761be567ab9dd0f201ab31ab49]
> 0(8293) pre_auth(): Invalid nonce value received
> 0(8293) build_auth_hf(): 'WWW-Authenticate: Digest realm="mydomain.org",
> nonce="4187b536507484b10dcc87b97b7ee4866bf23601"
> '
> 0(8293) parse_headers: flags=-1
> 0(8293) check_via_address(100.100.100.131, 100.100.100.131, 0)
> 0(8293) DEBUG:destroy_avp_list: destroying list (nil)
> 0(8293) receive_msg: cleaning up
> 0(8293) SIP Request:
> 0(8293) method: <REGISTER>
> 0(8293) uri: <sip:100.100.100.100:5060>
> 0(8293) version: <SIP/2.0>
> 0(8293) parse_headers: flags=1
> 0(8293) end of header reached, state=5
> 0(8293) parse_headers: Via found, flags=1
> 0(8293) parse_headers: this is the first via
> 0(8293) After parse_msg...
> 0(8293) preparing to run routing scripts...
> 0(8293) parse_headers: flags=128
> 0(8293) end of header reached, state=9
> 0(8293) DEBUG: get_hdr_field: <To> [48]; uri=[sip:31 at 100.100.100.100:5060]
> 0(8293) DEBUG: to body ["optiPoint 1 (31)" <sip:31 at 100.100.100.100:5060>
> ]
> 0(8293) get_hdr_field: cseq <CSeq>: <2012717776> <REGISTER>
> 0(8293) DEBUG: get_hdr_body : content_length=0
> 0(8293) found end of header
> 0(8293) DEBUG: is_maxfwd_present: max_forwards header not found!
> 0(8293) parse_headers: flags=256
> 0(8293) find_first_route(): No Route headers found
> 0(8293) loose_route(): There is no Route HF
> 0(8293) grep_sock_info - checking if host==us: 13==13 &&
> [100.100.100.100] == [100.100.100.100]
> 0(8293) grep_sock_info - checking if port 5060 matches port 5060
> 0(8293) grep_sock_info - checking if host==us: 13==13 &&
> [100.100.100.100] == [100.100.100.100]
> 0(8293) grep_sock_info - checking if port 5060 matches port 5060
> 0(8293) #### Authenticate ###
> 0(8293) check_nonce(): comparing
> [4187b536507484b10dcc87b97b7ee4866bf23601] and
> [4187b536507484b10dcc87b97b7ee4866bf23601]
> 0(8293) HA1 string calculated: 6a3f36c88615ea8517a2806d05102e83
> 0(8293) check_response(): Our result = 'c8fd067f0bb9cdb7a4688cde18a5d3cb'
> 0(8293) check_response(): Authorization is OK
> 0(8293) save_rpid(): rpid value is ''
> 0(8293) subst_run: running. r=0
> 0(8293) subst_run: matched (60, 20): [sip:31 at 100.100.100.100]
> 0(8293) subst_run: running. r=0
> 0(8293) subst_run: matched (114, 20): [sip:31 at 100.100.100.100]
> 0(8293) subst_run: running. r=1
> 0(8293) textops: subst_f: replacing at offset 101
> [sip:31 at 100.100.100.100] with [sip:31 at mydomain.org]
> 0(8293) textops: subst_f: replacing at offset 155
> [sip:31 at 100.100.100.100] with [sip:31 at mydomain.org]
> 0(8293) subst_f: lst was 0x80fd498
> 0(8293) #### IP replaced! ###
> 0(8293) #### saving location ###
> 0(8293) parse_headers: flags=-1
> 0(8293) parse_headers: flags=33554432
> 0(8293) build_contact(): Created Contact HF: Contact:
> <sip:31 at 100.100.100.131:5060>;expires=90
>
> 0(8293) parse_headers: flags=-1
> 0(8293) check_via_address(100.100.100.131, 100.100.100.131, 0)
> 0(8293) #### break ###
> 0(8293) DEBUG:destroy_avp_list: destroying list (nil)
> 0(8293) receive_msg: cleaning up
>
> snippet of ser.cfg:
>
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> log (1, "#### Authenticate ###\n");
> # Uncomment this if you want to use digest authentication
> if (!www_authorize("mydomain.org", "subscriber")) {
> www_challenge("mydomain.org", "0");
> break;
> };
>
> if (
> subst('/sip:([^@]*)@100.100.100.100/sip:\1 at mydomain.org/ig') ) {
> log (1, "#### IP replaced! ###\n");
> };
>
> log (1, "#### saving location ###\n");
> save("location");
> log (1, "#### break ###\n");
> break;
> };
>
> Hope someone can help me out of this one. Used version of ser is
> 0.8.99-dev12 (cvs checkout around 15:30 UTC on Nov 2 2004)
> Thanks.
>
> Alex Mack.
>
>
> Claus Futtrup wrote:
>
>> Hi
>>
>> You can use subst("") function in SER to handle rewriting of the To:
>> header
>> before you do save("") (requires little regular expression magic which I
>> can help with if you are not familiar with REs :-).
>>
>> Kind Regards
>>
>> Claus Futtrup
>> Project Manager
>> GoIP, The IP telephone company
>>
>> Mail: cf at goip.dk
>>
>> Tlf: +45 46968000
>> Fax: +45 46968001
>> GoIP: +45 32716064
>>
>> "The box said 'Requires Windows 95, NT, or better,' so I installed
>> Linux."
>>
>> This message is for the designated recipient only and may contain
>> privileged
>> or confidential information. If you have received it in error, please
>> notify the sender immediately and delete the original. Any other use
>> of the
>> email by you is prohibited.
>> ----- Original Message ----- From: "Alex Mack" <amack at fhm.edu>
>> To: <serusers at lists.iptel.org>
>> Sent: Tuesday, November 02, 2004 11:55 AM
>> Subject: Re: [Serusers] Problem with specific phones only able to
>> registerto ipnumber andnotdomain..
>>
>>
>>> I have similar problems (Siemens Optipoint 400) and I'm interested in
>>> a solution, too. I've posted to this mailing list a week ago. See
>>> below for the messages so far.
>>>
>>> Claus Futtrup wrote:
>>>
>>>> Hi Guys,
>>>>
>>>> I have this problem with a few phones, that they can only use IP
>>>> number for
>>>> proxy adress and domain. So when they register to the proxy, the
>>>> location
>>>> database will have user at ipnumber and not user at domain (use_domain, 0).
>>>>
>>>> The problem is then as follows: that when a caller that registeres
>>>> with the
>>>> domain name are unable to call users that register with the domains IP
>>>> number and vice versa. lookup("location") simply replies not found.
>>>>
>>>> Now I know why it happens, but is there a solution for this problem.
>>>> Like
>>>> only look at user and not user at domain or user at ipnumber?
>>>>
>>>> Kind Regards
>>>>
>>>> Claus Futtrup
>>>>
>>>> _______________________________________________
>>>> Serusers mailing list
>>>> serusers at lists.iptel.org
>>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>>
>>>
>>>
>>>> Hi Alex,
>>>>
>>>> Have you enabled "use_domain" parameter for usrloc module? If you
>>>> set it to 0 (as default) usrloc will not use the domain part to
>>>> perform usrloc lookup.
>>>>
>>>> Best regards,
>>>> Marian Dumitru
>>>>
>>>> Alex Mack wrote:
>>>>
>>>>> Hi!
>>>>>
>>>>> I'm using ser with X-Ten Lite Soft-UA and Siemens optiPoint 400 IP
>>>>> phones. Problem is: the Siemens phones don't register themselves
>>>>> correctly.
>>>>>
>>>>> For example:
>>>>> (e.g., ser has IP 100.100.100.100)
>>>>>
>>>>> Soft-UA is "sip:30 at mydomain.org"
>>>>> Phone 1 is "sip:31 at mydomain.org"
>>>>> Phone 2 is "sip:32 at mydomain.org"
>>>>>
>>>>> Soft-UA registers itself as "sip:30 at mydomain.org"
>>>>> Phone 1 registers itself as "sip:31 at 100.100.100.100" (seems to be
>>>>> odd behaviour)
>>>>> Phone 2 registers itself as "sip:32 at 100.100.100.100"
>>>>>
>>>>> But now the lookup fails if you start dialing from the phones. If
>>>>> you dial "32" (e.g. from Phone 1), the phone generates an INVITE to
>>>>> "sip:32 at mydomain.org" which can't be found in usrloc (DEBUG tells
>>>>> that) and the call fails. If you dial "30" from the same phone, the
>>>>> call comes through, because "sip:30 at mydomain.org" was found in usrloc.
>>>>> I tried to mangle the uri in the REGISTER message before
>>>>> "save("location");", without effect. I've used "replace(re, str)",
>>>>> but it didn't seem to work.
>>>>>
>>>>> Any ideas to overcome that bug of the phones?
>>>>>
>>>>> Thanks!
>>>>> Alex.
>>>>>
>>>>> _______________________________________________
>>>>> Serusers mailing list
>>>>> serusers at lists.iptel.org
>>>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>>>
>>>
>>> _______________________________________________
>>> Serusers mailing list
>>> serusers at lists.iptel.org
>>> http://lists.iptel.org/mailman/listinfo/serusers
>>>
>>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
--
Voice Sistem
http://www.voice-sistem.ro
More information about the sr-users
mailing list