[Serusers] problems to use to SER/ NAT
Klaus Darilion
klaus.mailinglists at pernau.at
Thu May 6 20:43:13 CEST 2004
sorry, I can't understand your error messages. I would be nice to switch
your system to english so that we understand the error messages :)
klaus
Sergio Gerardo Festa wrote:
> Thanks by its answer.
>
> ¿Ud knows because when I compile the sip_router of cvs obtain the following
> error?
>
> I have installed rh 9
>
> make
> .......
> cfg.y:1663: entrada no válida: `\r'
> cfg.y:1664: $$ de `else' no tiene tipo declarado
> cfg.y:1664: entrada no válida: `\r'
> cfg.y:1665: entrada no válida: `;'
> cfg.y:1665: entrada no válida: `\r'
> cfg.y:1666: entrada no válida: `\r'
> cfg.y:1667: entrada no válida: `\r'
> make: *** [cfg.tab.c] Error 1
>
>
>
> Thanks
>
> ----- Original Message -----
> From: "Klaus Darilion" <klaus.mailinglists at pernau.at>
> To: "Sergio Gerardo Festa" <festa at interactuarsh.com.ar>
> Cc: <serusers at lists.iptel.org>
> Sent: Thursday, May 06, 2004 3:09 PM
> Subject: Re: [Serusers] problems to use to SER/ NAT
>
>
>
>>Probably you are mixing versions of ser and rtpproxy which are
>
> incompatible.
>
>>Use rtpproxy release v20040105 for stable ser (rel_0_8_12) or use
>>unstable rtpproxy for unstable ser.
>>
>>regards,
>>klaus
>>
>>Sergio Gerardo Festa wrote:
>>
>>
>>>hello
>>>
>>>if I utilize rtpproxy.
>>>
>>>I show it my configuration :
>>>
>>>1- rtpproxy -l ip-private/ip-public
>>>
>>>2- ser.cfg
>>>
>>># Sections marked with !! Nathelper contain modifications for nathelper
>>>#
>>># NOTE !! This config is EXPERIMENTAL !
>>>#
>>># ----------- global configuration parameters ------------------------
>>>
>>>debug=3 # debug level (cmd line: -dddddddddd)
>>>fork=yes
>>>log_stderror=no # (cmd line: -E)
>>>
>>>/* Uncomment these lines to enter debugging mode
>>>fork=no
>>>log_stderror=yes
>>>*/
>>>
>>>check_via=no # (cmd. line: -v)
>>>dns=no # (cmd. line: -r)
>>>rev_dns=no # (cmd. line: -R)
>>>port=5060
>>>children=4
>>>fifo="/tmp/ser_fifo"
>>>listen=200.61.161.132
>>>alias="sip.boxip.com.ar"
>>>
>>># ------------------ module loading ----------------------------------
>>># Uncomment this if you want to use SQL database
>>>#loadmodule "/usr/local/lib/ser/modules/mysql.so"
>>>loadmodule "/usr/local/lib/ser/modules/sl.so"
>>>loadmodule "/usr/local/lib/ser/modules/tm.so"
>>>loadmodule "/usr/local/lib/ser/modules/rr.so"
>>>loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>>>loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>>>loadmodule "/usr/local/lib/ser/modules/registrar.so"
>>>loadmodule "/usr/local/lib/ser/modules/textops.so"
>>># Uncomment this if you want digest authentication
>>># mysql.so must be loaded !
>>>#loadmodule "/usr/local/lib/ser/modules/auth.so"
>>>#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>>># !! Nathelper
>>>loadmodule "/usr/local/lib/ser/modules/nathelper.so"
>>>
>>># ----------------- setting module-specific parameters ---------------
>>>
>>># -- usrloc params --
>>>
>>>modparam("usrloc", "db_mode", 0)
>>>
>>># Uncomment this if you want to use SQL database
>>># for persistent storage and comment the previous line
>>>#modparam("usrloc", "db_mode", 2)
>>># -- auth params --
>>># Uncomment if you are using auth module
>>>#modparam("auth_db", "calculate_ha1", yes)
>>># If you set "calculate_ha1" parameter to yes (which true in this
>
> config),
>
>>># uncomment also the following parameter)
>>>#modparam("auth_db", "password_column", "password")
>>># -- rr params --
>>># add value to ;lr param to make some broken UAs happy
>>>modparam("rr", "enable_full_lr", 1)
>>># !! Nathelper
>>>modparam("registrar", "nat_flag", 6)
>>>modparam("nathelper", "natping_interval", 30) # Ping interval 30 s
>>>modparam("nathelper", "ping_nated_only", 1) # Ping only clients behind
>
> NAT
>
>>># ------------------------- request routing logic -------------------
>>>
>>># main routing logic
>>>
>>>route{
>>>
>>> # initial sanity checks -- messages with
>>> # max_forwards==0, or excessively long requests
>>> if (!mf_process_maxfwd_header("10")) {
>>> sl_send_reply("483","Too Many Hops");
>>> break;
>>> };
>>> if (msg:len >= max_len ) {
>>> sl_send_reply("513", "Message too big");
>>> break;
>>> };
>>>
>>> if (nat_uac_test("3")) {
>>>
>>> if (method == "REGISTER" || ! search("^Record-Route:"))
>
> {
>
>>> log("LOG: Someone trying to register from private
>
> IP,
>
>>>rewriting\n");
>>> fix_nated_contact(); # Rewrite contact with source
>
> IP of
>
>>>signalling
>>> if (method == "INVITE") {
>>> fix_nated_sdp("1"); # Add direction=active to
>
> SDP
>
>>> };
>>> force_rport(); # Add rport parameter to topmost Via
>>> setflag(6); # Mark as NATed
>>> };
>>> };
>>>
>>> if (!method=="REGISTER") record_route();
>>>
>>> if (loose_route()) {
>>> # mark routing logic in request
>>> append_hf("P-hint: rr-enforced\r\n");
>>> route(1);
>>> break;
>>> };
>>>
>>> if (!uri==myself) {
>>> # mark routing logic in request
>>> append_hf("P-hint: outbound\r\n");
>>> route(1);
>>> break;
>>> };
>>> if (uri==myself) {
>>>
>>> if (method=="REGISTER") {
>>># Uncomment this if you want to use digest authentication
>>># if (!www_authorize("iptel.org", "subscriber")) {
>>># www_challenge("iptel.org", "0");
>>># break;
>>># };
>>> log(1,"registo 1");
>>> save("location");
>>> break;
>>> };
>>>
>>> lookup("aliases");
>>> if (!uri==myself) {
>>> append_hf("P-hint: outbound alias\r\n");
>>> route(1);
>>> break;
>>> };
>>>
>>> # native SIP destinations are handled using our USRLOC
>
> DB
>
>>> if (!lookup("location")) {
>>> sl_send_reply("404", "Not Found");
>>> break;
>>> };
>>> };
>>> append_hf("P-hint: usrloc applied\r\n");
>>> route(1);
>>>}
>>>
>>>route[1]
>>>{
>>> # !! Nathelper
>>> if (uri=~"[@:](192\.168\.|10\.|172\.(1[6-9]|2[0-9]|3[0-1])\.)"
>
> &&
>
>>>!search("^Route:")){
>>> sl_send_reply("479", "We don't forward to private IP
>>>addresses");
>>> break;
>>> };
>>>
>>> if (isflagset(6)) {
>>> force_rtp_proxy();
>>> };
>>>
>>> t_on_reply("1");
>>>
>>> if (!t_relay()) {
>>> sl_reply_error();
>>> };
>>>}
>>>
>>># !! Nathelper
>>>onreply_route[1] {
>>> # NATed transaction ?
>>> if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
>>> fix_nated_contact();
>>> force_rtp_proxy();
>>> } else if (nat_uac_test("1")) {
>>> fix_nated_contact();
>>> };
>>>}
>>>
>>>3- my log
>>>
>>>May 4 16:46:36 chitara rtpproxy[5767]: rtpproxy started.
>>>May 4 16:46:40 chitara rtpproxy[5767]: error: received invalid command
>
> 'V'
>
>>>May 4 16:46:40 chitara ser[5770]: ERROR: send_rtpp_command: can't read
>>>reply from a RTP proxy
>>>May 4 16:46:40 chitara ser[5770]: WARNING: nathelper: can't get version
>
> of
>
>>>the RTP proxy
>>>May 4 16:46:40 chitara ser[5770]: WARNING: nathelper: support for RTP
>>>proxyhas been disabled
>>>May 4 16:46:40 chitara ser[5770]: INFO: udp_init: SO_RCVBUF is
>
> initially
>
>>>65535
>>>May 4 16:46:40 chitara ser[5770]: INFO: udp_init: SO_RCVBUF is finally
>>>131070
>>>May 4 16:46:40 chitara ser[5775]: INFO: fifo process starting: 5775
>>>May 4 16:46:40 chitara ser[5775]: SER: open_uac_fifo: fifo server up at
>>>/tmp/ser_fifo...
>>>May 4 16:46:40 chitara ser[5775]: WARNING: no fifo_db_url given - fifo
>
> DB
>
>>>commands disabled!
>>>May 4 16:48:05 chitara ser[5771]: registo 1
>>>May 4 16:48:05 chitara ser[5773]: registo 1
>>>May 4 16:48:10 chitara ser[5771]: registo 1
>>>May 4 16:48:10 chitara ser[5774]: registo 1
>>>May 4 16:48:34 chitara ser[5774]: registo 1
>>>May 4 16:48:35 chitara ser[5771]: registo 1
>>>May 4 16:48:39 chitara ser[5774]: ERROR: force_rtp_proxy: support for
>
> RTP
>
>>>proxy is disabled
>>>May 4 16:48:42 chitara ser[5774]: ERROR: force_rtp_proxy: support for
>
> RTP
>
>>>proxy is disabled
>>>May 4 16:48:42 chitara ser[5774]: ERROR: on_reply processing failed
>>>May 4 16:48:42 chitara ser[5771]: ERROR: force_rtp_proxy: support for
>
> RTP
>
>>>proxy is disabled
>>>
>>>
>>>thanks
>>>
>>>Saludos!
>>>
>>>Sergio
>>>
>>>
>>>------------------------------------------------------------------------
>>>
>>>_______________________________________________
>>>Serusers mailing list
>>>serusers at lists.iptel.org
>>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>
>
>
More information about the sr-users
mailing list