[Serusers] Domain Setup Works!!
Sergio Diaz
sdiaz at comnet.net.mx
Tue May 4 22:32:44 CEST 2004
Thanks to all..
my setup for domain works!
Here is my setup ser.cfg
Thanks All.
--
Sergio Díaz Escobar. CCNA
<sdiaz at comnet dot net dot mx>
Network Engineer - Information Technology
COMNET, S.A. DE C.V.
Patriotismo 889 7o. Piso Col. Mixcoac
Mexico, 039100, D.F.
(52) 55 12539230 <> 121 Fax. (52) 55 12539240
Computers are unreliable, but humans are even more unreliable.
Any system which depends on human reliability is unreliable.
Murphy`s Law.
___________________________________________________________________
This email may be confidential and/or privileged. Only the intended
recipient may access or use it. Any dissemination, distribution or
copying of this email is strictly prohibited. If you are not the
intended recipient please notify us immediately by return email and
then erase the email.
We use virus scanning software but exclude all liability for viruses
or similar in any attachment or message...,..,..,.
-------------- next part --------------
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"
loadmodule "/usr/lib/ser/modules/domain.so"
loadmodule "/usr/lib/ser/modules/group.so"
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("domain", "db_mode", 1) # Use chaching
modparam("domain", "domain_table", "domain")
modparam("domain", "domain_col", "domain")
modparam("usrloc", "use_domain", 1)
modparam("registrar", "use_domain", 1)
modparam("auth_db", "use_domain", 1)
modparam("group", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("group", "table", "grp")
modparam("group", "user_column", "username")
modparam("group", "domain_column", "domain")
modparam("group", "group_column", "grp")
modparam("group", "use_domain", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
# if (uri==myself) {
# if (is_from_local()) {
if (is_uri_host_local()) {
lookup("aliases");
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!www_authorize("", "subscriber")) {
www_challenge("", "0");
break;
};
save("location");
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
More information about the sr-users
mailing list