[Serusers] radius issue

[Morris, Scott]

Present Configuration        OS - Redhat ES 3
                                       SER - 8.12 (installed from rpm)
                                       SER radius (installed from rpm)
                                       radius client - 3.25 i586 - installed
from rpmfind.net
 
SER starts, but I receive the message that my signin failed because the
service is not running.  SER is running, I id a ps and it show sintances of
SER running.  I beleive it is my ser.cfg file.  I am not sure where
authhentication configuration items begin and end with what I am doing.  I
am not using mysql, but want to use radius authentication. I have my ser.cfg
below.
 
 
Scott Morris
Enterprise Network Engineer
DOE - ORAU / ORISE
865-576-4672

 
 
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
 
# ----------- global configuration parameters ------------------------
 
#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)
 
/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/
debug=7
# fork=no
# log_stderror=yes
 
 
 


check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# alias=orau.gov
 

# ------------------ module loading ----------------------------------
 
# Uncomment this if you want to use SQL database
#loadmodule "/usr/lib/ser/modules/mysql.so"
 
loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
 
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/lib/ser/modules/auth.so"
#loadmodule "/usr/lib/ser/modules/auth_db.so"
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"
loadmodule "/usr/lib/ser/modules/auth_radius.so"
# ----------------- setting module-specific parameters ---------------
 
# -- usrloc params --
 
modparam("usrloc", "db_mode",   0)
 
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
 
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
 
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
 
# --auth_radius params
modparam("auth_radius", "radius_config",
"/etc/radiusclient/radiusclient.conf")
modparam("auth_radius", "service_type", 15)
# -------------------------  request routing logic -------------------
 
# main routing logic
 
route{
 
        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };
 
        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        record_route();
        # loose-route processing
        if (loose_route()) {
                t_relay();
                break;
        };
 
        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {
 
                if (method=="REGISTER") {
 
# Uncomment this if you want to use digest authentication
                        if (!radius_www_authorize("iptel.org")) {
                                www_challenge("iptel.org", "0");
 

                                break;
                        };
 
 
 

                        save("location");
                        break;
                };
 
                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        if (!t_relay()) {
                sl_reply_error();
        };
 
}

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040329/67669097/attachment.htm>