[Serusers] outgoing calls with alias

[Jan Janak]

It is possible to use database to do the mapping as well, but so far it
is in unstable only, sorry.

  Jan.

On 23-03 14:50, Ralph.Wabel at swisscom.com wrote:
> 
> My only intention is to associate a phone number to a user so that the called PSTN will see the correct phone number instead of the main phone number of the number block. 
> Isn't there an easy way to make a translation of the username to a phone number?
> Or is for what I want to do the only way to make a radius server? Because it seems that for rpid you need to make a Sip-Rpid entry in /usr/local/etc/raddb/users
> 
> Thanks a lot
> 
> Ralph
> 
> p.s. @jiri sorry I thought my mail goes to the usergroup and not only to you :-)
> 
> -----Original Message-----
> From: Jiri Kuthan [mailto:jiri at iptel.org] 
> Sent: Dienstag, 23. März 2004 10:50
> To: Wabel Ralph, INO-ITA
> Subject: RE: [Serusers] outgoing calls with alias
> 
> At 10:07 AM 3/23/2004, Ralph.Wabel at swisscom.com wrote:
> >Hi,
> >Thanks for the information. Do I really need a radius server or does it work without one?
> 
> that depends on what you wish to accomplish. For authentication, you can use
> several database systems.
> 
> 
> >Is there a good tutorial about that?
> 
> there is administrator's guide at SER webpage.
> 
> -jiri
> 
> 
> >Thanks
> >Ralph
> >
> >-----Original Message-----
> >From: Jiri Kuthan [mailto:jiri at iptel.org] 
> >Sent: Dienstag, 23. März 2004 00:46
> >To: Wabel Ralph, INO-ITA; serusers at lists.iptel.org
> >Subject: Re: [Serusers] outgoing calls with alias
> >
> >Aliases have impact only on incoming calls, they don't mangle 
> >outgoing signaling. They just rewrite r-uri, that's all they do.
> >To set callerid down in pstn, use rpid.
> >
> >-jiri
> >
> >At 05:42 PM 3/22/2004, Ralph.Wabel at swisscom.com wrote:
> >>Content-class: urn:content-classes:message
> >>Content-Type: multipart/alternative;
> >>        boundary="----_=_NextPart_001_01C4102C.A43065FC"
> >>
> >>Hi,
> >> 
> >>I have the problem that when I make an outgoing call over a Cisco Gateway to a PSTN phone. I've defined an alias for the user, works fine for incoming calls, but for the outgoing calls it shows always the number of the main number of the number block. When I make a debug I see that it goes out with the username instead of the alias. Here is my ser.cfg, maybe I've done something wrong in the config file. If someone could help me it would be great. Let me know if the config from the Cisco Gateway is also important.
> 
> --
> Jiri Kuthan            http://iptel.org/~jiri/ 
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers