[Serusers] ISDNgw + CAPI

[Jan Janak]

It's in plug-in/isdngw subdirectory.

  Jan.

On 19-03 18:42, F.S.Salloum wrote:
> Hi, 
> 
> I cannot find the files in the developer.berlios.de 
> could you please inform me where I can find them?
> 
> Regards
> Sotiris
> 
> -----Original Message-----
> From: Ulrich Abend [mailto:ullstar at iptel.org] 
> Sent: Friday, March 19, 2004 5:20 PM
> To: serusers at lists.iptel.org
> Cc: F.S.Salloum
> Subject: Re: [Serusers] ISDNgw + CAPI
> 
> Hi,
> 
> I've just updated the ser-isdngw.conf within the sems stable tree to use the
> 
> newer len:gt syntax.
> Apart from that the recommended way to get things going is the following:
> 
> - get ser stable version (rel_0_8_12), make, make install
> 
> - get sems stable version (ser_rel_0_8_12), 
> - edit sems-src/plug-in/isdngw/Makefile to enable capi support
> - make, make install
> 
> - cp sems-src/plug-in/isdngw/ser-isdngw.conf to /usr/local/ser/etc/ser.cfg
> and 
> adjust the commented parameters.
> - cp sems-src/plug-in/isdngw/isdngw.conf.sample to /etc/sems/isdngw.conf and
> 
> adjust the parameters
> - I recommend setting log_stderr=yes and fork=no for both, ser.cfg and 
> sems.conf, once things are working ok, use forking and log to syslog
> - cp -av sems-src/plug-in/isdngw/etc/db to /etc/sems/db and point the db 
> parameter in ser.cfg to that location
> 
> - run ser and check if it comes up correctly
> - try to register a SIP phone with your running ser using a valid
> PSTN-number 
> - run sems and check if it comes up correctly
> 
> - Use your SIP phone to call an external PSTN number (Note: if you call a 
> local number, the call is signalled to the isdngw itself too, as long as you
> 
> keep the sample isdngw.conf, which accepts any call on any controller!).
> 
> - Use a PSTN phone to call the number, your SIP phone is registered at.
> 
> Once you have all this running, I would address more complex setups or 
> integrate isdngw in your existing ser configuration.
> 
> I will be offline from now on until 29th, sorry but more than this short
> help, 
> I cannot give at this time. Please review the README and README.capi files
> in 
> the isdngw directory, if you have problems. You can also try to find help by
> 
> mailing to serusers at lists.iptel.org or sems at lists.iptel.org.
> 
> Best regards,
> 
> Uli.
> 
> On Friday 19 March 2004 09:52, F.S.Salloum wrote:
> > Dear all,
> >
> > Has anybody installed ser with sems and isdngw?
> >
> > I checked the website  and i found out a conf file (berlios)
> > but has problems when it calls the vm module.
> >
> > The CAPI works fine with Asterisk PBX, but i prefer ser in order
> > to develop more advanced hybrid services (HOLD, TRANSFER etc).
> >
> > Attached you can find the conf files.
> >
> >
> > Thanks in advance
> > Sotiris
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers