[Serusers] Calls cuts off

[Billy]

Hello,

I'm facing some very different when making calls with an ATA... it
happens exactly as a msg written to the list a couple months ago, but
I found no response for this question.

It's weird cause it does not happen when I call from an ATA to another
ATA with alias on the same proxy.

Any clues?!

Thanks..

Billy

[Serusers] Session Header != Media ?
Kannaiyan Natesan nkans at lycos.co.uk 
Fri Nov 21 19:57:33 CET 2003 

Previous message: [Serusers] ser 0.8.11-r1 bugfix release 
Next message: [Serusers] Ser behind NAT - possible? 
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] 

I tried to call using cisco ata 186 within itself.
But after few seconds it automatically cuts off automatically.

Below is the log from ata 186.

Please help.
Thanks. 

Kannaiyan


[0:0]Start RTP Rx
RTP Rx Init: 0, 0
[0]INVITE Retry 0
Response=100; Trying
Session Header != Media
AVT: payload=101
[1]: OOB DTMF
[1:0]Start RTP Rx
RTP Rx Init: 1, 1
SCC:ev=21[1:0] 0 0
SCC:ev=5[1:0] 13 0
[1:0]RINGING
SCC Cmd[1:0]ALERT
Response=180; Ringing
SCC:ev=10[0:0] 3 0
[0]StartTone 3
[1]StopTone
SCC Cmd[1:0]ANSWER
[1]R2INV Retry 0
Session Header != Media
AVT: payload=101
Response=200; OK
[0]: OOB DTMF
[0:0]Rel LBRC Res
Frames per packet=2
SetG723Mode: 2 0
[0]Enable encoder 0
[0]: EC 1
RTP TX[0]:SSRC_ID = 1803d488
RTP Tx Init: 0, 0
[0]Enable encoder 0
Enable LEC adapt [0]=1
[0]Start/Resume Media-> 192.168.0.2:16386 (pt=0)
SCC:ev=12[0:0] 3 0
[0]StopTone
[1]DPKT 1st: 800 560, pt 13
[1]R2INV Retry 1
Session Header != Media
AVT: payload=101
[1]R2INV Retry 2
Session Header != Media
AVT: payload=101
[1]R2INV Retry 3
Session Header != Media
AVT: payload=101
[1]R2INV Retry 4
Session Header != Media
AVT: payload=101
[1]R2INV Retry 5
Session Header != Media
AVT: payload=101
[1]R2INV Retry 6
Session Header != Media
AVT: payload=101
[1]R2INV Retry 7
Session Header != Media
AVT: payload=101
change next hop[1]: c = 2
R2INV TO; NoAltProxy
Timeout waiting for ACK
[1]BYE Retry 0
Got BYE/CANCEL Resp
SCC:ev=13[1:0] 6 0
[1]StartTone 2
[1]StopTone
SCC Cmd[1:0]RELEASE
CCBS expired
>>> SIP Soft Reset [1:0] <<<
[1:0]Rel LBRC Res
[1]MPT mode 0
SCC Cmd[0:0]DISCONNECT
[0]BYE Retry 0
Got BYE/CANCEL Resp
SCC:ev=13[0:0] 10 0
SCC Cmd[0:0]RELEASE