[Serusers] voicemail problem vm_reply command not avaliable

[Welesley Sibelson Dias]

I have one problem with voicemail , sems return vm_reply command not
avaliable ? 
thks.
> 
> 
> 
> # 
> # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ 
> # 
> # simple quick-start config script 
> # 
>  
> # ----------- global configuration parameters ------------------------ 
>  
> debug=3         # debug level (cmd line: -dddddddddd) 
> fork=yes 
> log_stderror=no	# (cmd line: -E) 
>  
> #/* Uncomment these lines to enter debugging mode  
> debug=7 
> fork=no 
> log_stderror=yes 
> #*/ 
>  
> check_via=no	# (cmd. line: -v) 
> dns=no           # (cmd. line: -r) 
> rev_dns=no      # (cmd. line: -R) 
> port=5060 
> children=4 
> fifo="/tmp/ser_fifo" 
>  
> # ------------------ module loading ---------------------------------- 
>  
> # Uncomment this if you want to use SQL database 
> loadmodule "/usr/local/lib/ser/modules/mysql.so" 
>  
> loadmodule "/usr/local/lib/ser/modules/sl.so" 
> loadmodule "/usr/local/lib/ser/modules/tm.so" 
> loadmodule "/usr/local/lib/ser/modules/rr.so" 
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so" 
> loadmodule "/usr/local/lib/ser/modules/usrloc.so" 
> loadmodule "/usr/local/lib/ser/modules/registrar.so" 
> loadmodule "/usr/local/lib/ser/modules/acc.so" 
> # Uncomment this if you want digest authentication 
> # mysql.so must be loaded ! 
> loadmodule "/usr/local/lib/ser/modules/auth.so" 
> loadmodule "/usr/local/lib/ser/modules/auth_db.so" 
> loadmodule "/usr/local/lib/ser/modules/group.so" 
> loadmodule "/usr/local/lib/ser/modules/uri.so" 
> loadmodule "/usr/local/lib/ser/modules/uri_radius.so" 
> loadmodule "/usr/local/lib/ser/modules/group_radius.so" 
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so" 
>  
> # ----------------- setting module-specific parameters --------------- 
>  
> # -- usrloc params -- 
>  
> #modparam("usrloc", "db_mode",   0) 
> modparam("tm", "fr_inv_timer", 90) 
> # Uncomment this if you want to use SQL database  
> # for persistent storage and comment the previous line 
> modparam("usrloc", "db_mode", 2) 
>  
> # -- auth params -- 
> # Uncomment if you are using auth module 
> # 
> #modparam("auth_db", "calculate_ha1", yes) 
> # 
> # If you set "calculate_ha1" parameter to yes (which true in this
> config),  
> # uncomment also the following parameter) 
> # 
> #modparam("auth_db", "password_column", "kknd22") 
> #modparam("auth","secret","teste23") 
> modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") 
> modparam("auth_radius","service_type",15) 
> #modparam("acc", "log_level", 1) 
> #modparam("acc","log_flag",1) 
> #modparam("acc","log_fmt","miocfs") 
> modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf") 
> modparam("acc", "service_type", 15) 
> modparam("acc", "radius_flag", 1) 
> modparam("acc", "radius_missed_flag",2) 
> modparam("group", "db_url", "sql://ser:heslo@localhost/ser") 
> modparam("tm", "fr_inv_timer", 90) 
>  
> 
> # -- rr params -- 
> # add value to ;lr param to make some broken UAs happy 
> modparam("rr", "enable_full_lr", 1) 
>  
> # -------------------------  request routing logic ------------------- 
>  
> # main routing logic 
>  
> 
> route{ 
>  
> 	# initial sanity checks -- messages with 
> 	# max_forwards==0, or excessively long requests 
> 	if (!mf_process_maxfwd_header("10")) { 
> 		sl_send_reply("483","Too Many Hops"); 
> 		break; 
> 	}; 
> 	if ( msg:len > max_len ) { 
> 		sl_send_reply("513", "Message too big"); 
> 		break; 
> 	}; 
>  
> if (method=="INVITE" || method=="BYE" || method=="CANCEL") { 
>  setflag(1); 
> }; 
>  
> 
> 	# we record-route all messages -- to make sure that 
> 	# subsequent messages will go through our proxy; that's 
> 	# particularly good if upstream and downstream entities 
> 	# use different transport protocol 
> 	record_route();	 
> 	# loose-route processing 
> 	if (loose_route()) { 
> 		t_relay(); 
> 		break; 
> 	}; 
>  
> 	# if the request is for other domain use UsrLoc 
> 	# (in case, it does not work, use the following command 
> 	# with proper names and addresses in it) 
> 	if (uri==myself) { 
>  
> 		if (method=="REGISTER") { 
>  
> # Uncomment this if you want to use digest authentication 
> 			if (!radius_proxy_authorize("")) { 
> 				proxy_challenge("", "1"); 
> 				break; 
> 			}; 
>  
> 			save("location"); 
> 			break; 
> 		}; 
>  
> 
> 		# native SIP destinations are handled using our USRLOC DB 
> 		#if (!lookup("location")) { 
> 		#	sl_send_reply("404", "Not Found"); 
> 		#	break; 
> 		#}; 
> 	}; 
> 	# forward to current uri now; use stateful forwarding; that 
> 	# works reliably even if we forward from TCP to UDP 
> 	#if (!t_relay()) { 
> 	#	sl_reply_error(); 
> 	#}; 
>  
> 
> 
> 
> # does the user wish redirection on no availability? (i.e., is he 
> # in the voicemail group?) -- determine it now and store it in 
> # flag 4, before we rewrite the flag using UsrLoc 
> 	if (is_user_in("Request-URI", "voicemail")) { 
> 		setflag(4); 
> 	}; 
>  
> 	# native SIP destinations are handled using our USRLOC DB 
> 	if (!lookup("location")) { 
> 		# handle user which was not found 
> 		route(4); 
> 		break; 
> 	}; 
>  
> 	# if user is on-line and is in voicemail group, enable redirection 
> 	if (method == "INVITE" && isflagset(4)) { 
> 		t_on_failure("1"); 
> 	}; 
> 	t_relay(); 
> } 
>  
> # ------------- handling of unavailable user ------------------ 
> route[4] { 
>  
> 	# non-Voip -- just send "off-line" 
> 	if (!(method == "INVITE" || method == "ACK" || method == "CANCEL")) { 
> 		sl_send_reply("404", "Not Found"); 
> 		break; 
> 	}; 
>  
> 	# not voicemail subscriber 
> 	if (!isflagset(4)) {  
> 		sl_send_reply("404", "Not Found and no voicemail turned on"); 
> 		break; 
> 	}; 
>  
> 	# forward to voicemail now 
> 	rewritehostport("200.146.208.4:5090"); 
> 	t_relay_to_udp("200.146.208.4", "5090");	 
> } 
>  
> # if forwarding downstream did not succeed, try voicemail running 
> # at 200.146.208.4:5090 
>  
> failure_route[1] { 
> 	revert_uri(); 
> 	rewritehostport("200.146.208.4:5090"); 
> 	append_branch(); 
> 	t_relay_to_udp("200.146.208.4", "5090"); 
> }
>