[Serusers] Compile error on a V100

Joseph Cheung Joseph.Cheung2 at TELUS.COM
Fri Jun 25 00:48:28 CEST 2004


Solve the compilation problem finally by using -cpu=ultrasparc option.

-----Original Message-----
From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] On Behalf Of Joseph Cheung
Sent: June 24, 2004 5:23 PM
To: serusers at lists.iptel.org
Subject: [Serusers] Compile error on a V100

Hi.

I am trying to compile the SER on a Sun Fire V100 and have the following assemble error. 

I am wondering if someone could point me to the right direction.

Thanks

JC

bash: makeall: command not found
ipvoiss1:/usr/joseph/JC/ser/ser-0.8.12$ make all
Makefile.defs:473: Old gcc detected (2.9x), use  gcc >= 3.1 for better results
Makefile:238: warning: overriding commands for target `/usr/local'
Makefile:235: warning: ignoring old commands for target `/usr/local'
Makefile:241: warning: overriding commands for target `/usr/local'
Makefile:238: warning: ignoring old commands for target `/usr/local'
Makefile:245: warning: overriding commands for target `/usr/local'
Makefile:241: warning: ignoring old commands for target `/usr/local'
Makefile:248: warning: overriding commands for target `/usr/local'
Makefile:245: warning: ignoring old commands for target `/usr/local'
Makefile:251: warning: overriding commands for target `/usr/local'
Makefile:248: warning: ignoring old commands for target `/usr/local'
gcc -g -O9 -funroll-loops   -Wall  -mv8      -DNAME='"ser"' -DVERSION='"0.8.12"' -DARCH='"sparc64"' -DOS='"solaris"' -DCOMPILER='"gcc 2.95"' -D__CPU_sparc64 -D__OS_solaris -DCFG_DIR='"/usr/local /etc/ser/"' -DPKG_MALLOC -DSHM_MEM  -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE
-DF_MALLOC  -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024  -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD -c main.c -o main.o
/usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 1375: error: cannot use v8plus instructions in a non-v8plus target binary
/usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 1401: error: cannot use v8plus instructions in a non-v8plus target binary
/usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 10948: error: cannot use v8plus instructions in a non-v8plus target binary
/usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 10977: error: cannot use v8plus instructions in a non-v8plus target binary
make: *** [main.o] Error 1
ipvoiss1:/usr/joseph/JC/ser/ser-0.8.12$

-----Original Message-----
From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] On Behalf Of Jeremy George
Sent: June 24, 2004 4:23 PM
To: gc
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] Using AS5300 for SER


  Where 10.1.1.1 is the address of the SER host and 10.2.1.1 is the
address of the AS5300.

access-list 101 permit ip host 10.1.1.1 host 10.2.1.1
access-list 101 deny   tcp any host 10.2.1.1 eq 5060
access-list 101 deny   udp any host 10.2.1.1 eq 5060
access-list 101 permit ip any any

- Jeremy

On Thu, 24 Jun 2004, gc wrote:

> Date: Thu, 24 Jun 2004 16:16:45 -0400
> From: gc <garych at unidial.com>
> To: serusers at lists.iptel.org
> Subject: [Serusers] Using AS5300 for SER
> 
> I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300 only accept sip call forward by ser. Does anybody know how to setup AS5300 for this?
> 
> Gary

-- 

_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers


_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers





More information about the sr-users mailing list