[Serusers] Packet loss ?

[Harold Workman]

How can I monitor packetloss from the SER?  I am able to monitor Ploss from
the cisco by monitoring the active call, but  I dont know how to monitor ip
to ip calls.

I am encountering a problem where if i call a SIP phone from the PSTN I
receive 0 Ploss.  if I make a call from the SIP phone to the PSTN i get tons
of PLoss.

I have been monitoring it from my cisco gateway.....


Called to PSTN   in the duration of 37 seconds i lost 94 packets with a
delay of 45 avg.

39FA : 276741189hs.1 +742 pid:14 Answer 7133154694 active
 dur 00:00:37 tx:1001/154588 rx:4203/336240
 IP 64.72.107.1:16348 rtt:0ms pl:41050/1190ms lost:94/6/0 delay:45/45/85ms
g711u
law




Called from PSTN  in the duration of 50 seconds i lost 0 packets with a
delay of 25 avg.

3A0D : 276761635hs.2 +167 pid:1011 Originate 7133154694 active
 dur 00:00:50 tx:2517/402720 rx:5033/402640
 IP 64.72.107.1:16550 rtt:3174ms pl:45030/0ms lost:0/2/0 delay:25/25/65ms
g711ul
aw

-----------------------
Harold Workman
CCNA, CCNP
Cytel Communications
hworkman at cytelcom.com
Ph. 281-449-4000 x3098