[Serusers] ser stable + mediaproxy

[Ri Liang]

Hello,

I got the said error  on a REGISTER.

And i'm using the standar nathelper.cfg (modified with mediaproxy commands).

Regards,

Ri Liang
  ----- Original Message ----- 
  From: Adrian Georgescu 
  To: Ri Liang 
  Cc: tjapko at xeloq.com ; serusers at lists.iptel.org 
  Sent: Thursday, June 03, 2004 1:52 AM
  Subject: Re: [Serusers] ser stable + mediaproxy


  You should apply the functions from the module to INVITE and REGISTER only. Messages having no contact header will give the warning which is harmless but your config needs some tuning.

  Adrian

  On Jun 3, 2004, at 9:23 AM, Ri Liang wrote:


    Thanks a lot,
     
    I'm now using lates ser stable CVS+mediaproxy.
     
    But in the register process i got this error (the user get successfully register), please advise if this is a normal messsage.
     
    ....
    /ser[8813]: error: mediaproxy/getContactURI(): error parsing Contact body
    ....
     
     
    Ri Liang
    ------------------------------------------------------------------------------------------------------
    /ser[8813]:  method:  <REGISTER>
    /ser[8813]:  uri:     <sip:192.168.2.3>
    /ser[8813]:  version: <SIP/2.0>
    /ser[8813]: parse_headers: flags=1
    /ser[8813]: Found param type 232, <branch> = <z9hG4bK3e28f0599ccb9b4a>; state=16
    /ser[8813]: end of header reached, state=5
    /ser[8813]: parse_headers: Via found, flags=1
    /ser[8813]: parse_headers: this is the first via
    /ser[8813]: After parse_msg...
    /ser[8813]: preparing to run routing scripts...
    /ser[8813]: DEBUG : is_maxfwd_present: searching for max_forwards header
    /ser[8813]: parse_headers: flags=128
    /ser[8813]: end of header reached, state=9
    /ser[8813]: DEBUG: get_hdr_field: <To> [35]; uri=[sip:2222 at 192.168.2.3;user=phone]
    /ser[8813]: DEBUG: to body [<sip:2222 at 192.168.2.3;user=phone>^M ]
    /ser[8813]: get_hdr_field: cseq <CSeq>: <100> <REGISTER>
    /ser[8813]: DEBUG: is_maxfwd_present: value = 70
    /ser[8813]: parse_headers: flags=64
    /ser[8813]: error: mediaproxy/getContactURI(): error parsing Contact body
    /ser[8813]: check_via_address(192.168.2.22, 192.168.2.22, 0)
    /ser[8813]: parse_headers: flags=256
    /ser[8813]: DEBUG: get_hdr_body : content_length=0
    /ser[8813]: found end of header
    /ser[8813]: find_first_route(): No Route headers found
    /ser[8813]: loose_route(): There is no Route HF
    /ser[8813]: check_self - checking if host==us: 11==9 &&  [192.168.2.3] == [127.0.0.1]
    /ser[8813]: check_self - checking if port 5060 matches port 5060
    /ser[8813]: check_self - checking if host==us: 11==11 &&  [192.168.2.3] == [192.168.2.3]
    /ser[8813]: check_self - checking if port 5060 matches port 5060
    /ser[8813]: check_self - checking if host==us: 11==9 &&  [192.168.2.3] == [127.0.0.1]
    /ser[8813]: check_self - checking if port 5060 matches port 5060
    /ser[8813]: check_self - checking if host==us: 11==11 &&  [192.168.2.3] == [192.168.2.3]
    /ser[8813]: check_self - checking if port 5060 matches port 5060
    /ser[8813]: parse_headers: flags=4096
    /ser[8813]: pre_auth(): Credentials with given realm not found
    /ser[8813]: build_auth_hf(): 'WWW-Authenticate: Digest realm="sip.callmyway.net", nonce="40bec3e4d09adf671de759a294bcdca543de6efc"^M '
    /ser[8813]: parse_headers: flags=-1
    /ser[8813]: check_via_address(192.168.2.22, 192.168.2.22, 0)
    /ser[8813]: receive_msg: cleaning up
    /ser[8811]: SIP Request:
     
    ------------------------------------------------------------------------------------------------------
    ----- Original Message -----
    From: Tjapko ITS Consult at ncy 
    To: Adrian Georgescu ; rliang at callmyway.com 
    Cc: serusers at lists.iptel.org 
    Sent: Tuesday, June 01, 2004 5:24 AM
    Subject: RE: [Serusers] ser stable + mediaproxy

    Hello, I had same problem. Use stable 0.8.12 SER from latest CVS and mediaproxy from latest CVS head. Recompile this and it should work. Do not use rpm or tarball to create your SER. Hope this helps. I have discovered more things that are causing problems implementing SER with Mediaproxy.  Tjapko.
    -----Original Message-----
    From: serusers-bounces at lists.iptel.org [mailto:serusers-bounces at lists.iptel.org]On Behalf Of Adrian Georgescu
    Sent: Martes, 01 de Junio de 2004 03:38 a.m.
    To: rliang at callmyway.com
    Cc: serusers at lists.iptel.org
    Subject: [Serusers] ser stable + mediaproxy

    Hi Ri,

    We use successfully mediaproxy with both stable and unstable branches of ser on Debian systems. There is no known reason it should crash, maybe IPTEL guys would have more clues as I saw this problem being reported several time.

    Adrian


    --
    Hello,

    I'm using lates ser CVS stable with mediaproxy (from unstable ser directory
    and also using the mysql create with unstable ser_mysql.sh).

    SER crash in the same moment when a sip cliente get register with the
    correct user and password, i have attach the syslog.

    Am I using the right combination of SER+mediaproxy ? or do i need to use
    only the unstable ser (with it's mediaproxy include).
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040605/1569f01b/attachment.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ser.cfg.txt
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040605/1569f01b/attachment.txt>