[Serusers] problem with "serctl add "...

[Daniel-Constantin Mierla]

The problem is in MySQL side. You need to grant access rights to user 
'ser' from localhost to MySQL database. For more, see:

http://dev.mysql.com/doc/mysql/en/MySQL_Database_Administration.html
http://dev.mysql.com/doc/mysql/en/Adding_users.html

Daniel

On 7/27/2004 8:10 AM, Murat Mehmet wrote:

> Hello all,
> Both of my mysql and ser servers are running !.
>
> I have uncommented some lines on "ser.cfg" file.
>
> But I have problem when I want to add users with  "serctl" and  get  
> the  following error messages.
>
>
> ---------------------------------------------------------------------------------------------------------- 
>
> serctl add mura password murat at iptel@org
> MySql password:
> ERROR 1045: Access denied for user: 'ser at localhost' (Using password: YES)
> introducing a new user to the database failed
>
>
> Do you have any suggestions ?. My syetem is Fedora 1, and ser version 
> is:0.8.12.
> Thank you for your help.
>
> ****************************************************************
> Last situation of ser.cfg file
> ************************************************************
> #
> # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3         # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no    # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
>
> check_via=no    # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/lib/ser/modules/auth.so"
> loadmodule "/usr/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> modparam("usrloc", "db_mode",   0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this 
> config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> # -------------------------  request routing logic -------------------
>
> # main routing logic
>
> route{
>
>     # initial sanity checks -- messages with
>     # max_forwards==0, or excessively long requests
>     if (!mf_process_maxfwd_header("10")) {
>         sl_send_reply("483","Too Many Hops");
>         break;
>     };
>     if ( msg:len > max_len ) {
>         sl_send_reply("513", "Message too big");
>         break;
>     };
>
>     # we record-route all messages -- to make sure that
>     # subsequent messages will go through our proxy; that's
>     # particularly good if upstream and downstream entities
>     # use different transport protocol
>     record_route();   
>     # loose-route processing
>     if (loose_route()) {
>         t_relay();
>         break;
>     };
>
>     # if the request is for other domain use UsrLoc
>     # (in case, it does not work, use the following command
>     # with proper names and addresses in it)
>     if (uri==myself) {
>
>         if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> #            if (!www_authorize("iptel.org", "subscriber")) {
> #                www_challenge("iptel.org", "0");
> #                break;
> #            };
>
>             save("location");
>             break;
>         };
>
>         # native SIP destinations are handled using our USRLOC DB
>         if (!lookup("location")) {
>             sl_send_reply("404", "Not Found");
>             break;
>         };
>     };
>     # forward to current uri now; use stateful forwarding; that
>     # works reliably even if we forward from TCP to UDP
>     if (!t_relay()) {
>         sl_reply_error();
>     };
>
> }
>
>
>    
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>  
>