[Serusers] ERROR: acc_rad_request: radius-ing failed

Jan Janak jan at iptel.org
Wed Jul 21 13:10:49 CEST 2004


There is some problem with the radiusclient library -- this error comes
from the library. Do you see any other error message (generated by the
radiusclient library or freeradius server) in the logs ?

  Jan.

On 20-07 11:18, Rafael J. Risco G.V. wrote:
> Hi
> 
> please someone help me... I?m still having problems to obtain radius accounting and I found this error in the debug file:
> 
> .
> .
> 7(7511) ERROR: acc_rad_request: radius-ing failed
>  7(7511) DEBUG: cleanup_uacs: RETR/FR timers reset
>  7(7511) DEBUG: add_to_tail_of_timer[2]: 0x402f59b8
>  7(7511) receive_msg: cleaning up
>  5(7509) ERROR: acc_rad_request: radius-ing failed
>  5(7509) SER: forwarding ACK  statelessly 
>  5(7509) DEBUG: mk_proxy: doing DNS lookup...
>  5(7509) check_via_address(200.110.6.58, 200.110.6.58, 0)
>  5(7509) Sending:
> ACK sip:6603000 at 10.0.0.236 SIP/2.0
> Record-Route: <sip:6603000 at 200.110.2.132;ftag=4040fe43a4;lr=on>
> Via: SIP/2.0/UDP 200.110.2.132;branch=0
> Via: SIP/2.0/UDP 200.110.6.58:5060;branch=z9hG4bK4040fe43a418
> From: <sip:6604000 at 200.110.2.132>;tag=4040fe43a4
> To: <sip:6603000 at 200.110.2.132>;tag=8e006a06a4
> Call-ID: 40d9ba40-16dd-fe9c-8043-0002a4005564 at 200.110.6.58
> CSeq: 18 ACK
> Route: <sip:6603000 at 200.110.2.132;ftag=4040fe43a4;lr=on>
> Content-Length: 0
> Max-Forwards: 69
> 
> .
> .
> this error appears only when I try "setflag(1)" for the transactions I want to account, also in this case the ACK message it comes too late (not when pick Up the phone...).
> 
> these are some details of my installation:
> 
> - SuSE Linux 9.0 (i586)
> - ser-0.8.12
> - I have followed "radius-how-to" very carefully.
> - radiusclient-0.3.2
> - freeradius-0.9.3  (installed in the same host with ser)
> - I`m Not using mysql (do I have to use it??) 
> - my current ser.cfg and endpoints configuration are shown below
> 
> thanks.
> 
> Rafael Risco
> 
> PS: Config Files:
> 
> #
> # ----------- global configuration parameters ------------------------
> 
> # debug=3         # debug level (cmd line: -dddddddddd)
> # fork=yes
> # log_stderror=no        # (cmd line: -E)
> 
> #/* Uncomment these lines to enter debugging mode 
> debug=6
> fork=yes
> log_stderror=yes
> #*/
> 
> check_via=no    # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> #loadmodule "/usr/local/lib/ser/modules/mysql.so"
> 
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> # loadmodule "/usr/local/lib/ser/modules/uri.so"
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> # loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> loadmodule "/usr/local/lib/ser/modules/group_radius.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> 
> # load the NAT Helper Module
> # loadmodule "/usr/local/lib/ser/modules/nathelper.so"
> 
> # ----------------- setting module-specific parameters ---------------
> # -- usrloc params --
> # modparam("usrloc", "db_mode",   0)
> # Uncomment this if you want to use SQL database 
> # for persistent storage and comment the previous line
> # modparam("usrloc", "db_mode", 2)
> # -- auth params --
> # Uncomment if you are using auth module
> #
> # modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config), 
> # uncomment also the following parameter)
> #
> # modparam("auth_db", "password_column", "password")
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> # modparam("acc","log_level",1)
> modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> modparam("auth_radius","service_type",15)
> modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> modparam("acc", "service_type", 15)
> modparam("acc", "radius_flag", 1)
> modparam("acc", "radius_missed_flag", 3)
> 
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> 
> route{
> 
>         # initial sanity checks -- messages with
>         # max_forwards==0, or excessively long requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 break;
>         };
>         if ( msg:len > max_len ) {
>                 sl_send_reply("513", "Message too big");
>                 break;
>         };
> 
>         # we record-route all messages -- to make sure that
>         # subsequent messages will go through our proxy; that's
>         # particularly good if upstream and downstream entities
>         # use different transport protocol
>         record_route();
>         # loose-route processing
> #        if (loose_route()) {
> #                t_relay();
> #                break;
> #        };
> 
>         # if the request is for other domain use UsrLoc
>         # (in case, it does not work, use the following command
>         # with proper names and addresses in it)
> 
> 
>                 if (method=="REGISTER") {
> 
>                         log(1, "REGISTER: Authenticating user\n");
> 
>                        if (!radius_www_authorize("")) {
>                                 log(1, "REGISTER: challenging user\n");
>                                 www_challenge("", "0");
>                                 break;
>                         };
> 
>                         save("location");
>                         break;
>                 };
> 
>         if (method=="INVITE") {
> 
>                 log(1, "INVITE\n");
>                 setflag(1); /* set for accounting (the same value as in log_flag!) */
>                 };
> 
> 
>         if (method=="MESSAGE") {
>                 log(1, "MESSAGE\n");
>                 setflag(1); /* set for accounting (the same value as in log_flag!) */
>                 };
> 
> 
>         if (method=="BYE" || method=="CANCEL") {
>                 log (1, "BYE or CANCEL\n");
>                 setflag(1);
>                 };
> 
> 
>  
>                # native SIP destinations are handled using our USRLOC DB
>                 if (!lookup("location")) {
>                         sl_send_reply("404", "Not Found");
>                         break;
>                 };
> 
> 
>         # forward to current uri now; use stateful forwarding; that
>         # works reliably even if we forward from TCP to UDP
>         if (!t_relay()) {
>                 sl_reply_error();
>                 break;
>         };
> 
> }
> 
> 
> 
> ########################################################################
> Example of one endpoint config:
> VoiceFinder Gateway Series (http://www.addpac.com)
> AP200B System software Revision 8.10
> 
> 
> ! 
> ! VoIP configuration. 
> ! 
> ! 
> ! Voice service voip configuration. 
> ! 
> voice service voip 
>  fax protocol t38 redundancy 0 
>  fax rate 9600 
>  h323 call start fast 
>  no force-starth245 
>  busyout monitor gatekeeper 
>  busyout monitor voip-interface 
>  display send e164
> ! 
> ! 
> ! Voice port configuration. 
> ! 
> voice-port 0/0 
> ! FXS 
>  caller-id enable 
> ! 
> ! 
> voice-port 0/1 
> ! FXS 
>  caller-id enable 
> ! 
> ! 
> ! 
> !             
> ! Pots peer configuration. 
> ! 
> dial-peer voice 0 pots
>  destination-pattern 6600020 
>  port 0/0 
>  call-waiting
> ! 
> dial-peer voice 1 pots
>  destination-pattern 6603000 
>  port 0/1 
>  call-waiting
> ! 
> ! 
> ! 
> ! Voip peer configuration. 
> ! 
> !             
> dial-peer voice 1002 voip 
>  destination-pattern 6604000 
>  session target sip-server  
>  session protocol sip 
>  codec g7231r63 
>  dtmf-relay rtp-2833 
> ! 
> ! 
> ! 
> ! SIP UA configuration. 
> ! 
> sip-ua 
>  user-register 
>  sip-username 660300X 
>  sip-password 1234 
>  sip-server 200.X.2.132 
>  register e164 
> ! 
> ! 
> ! MGCP configuration. 
> ! 
> mgcp 
>  codec  g711ulaw 
> !             
> ! 
> ! Tones 
> ! 
> ! 
> voip-interface ether0.0
> !
> agent00 # 
> 
> 
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers




More information about the sr-users mailing list