[Serusers] Remote Party ID
Marcello Lupo
lupo at itspecialist.it
Tue Jul 13 16:14:18 CEST 2004
Hi,
we got the same problem on cisco 3725 and can confirm that is a problem on the
Redirecting Number. We tried to move the cisco from user to network (with
protocol net5) as stated from cisco documentation but the Cisco still don't
put the Redirecting Number in to the ISDN Setup.
On our platform the Remote-Party-ID is working properly.
Bye,
MArcello
On Tuesday 13 July 2004 14:38, Ezequiel Colombo wrote:
> The Remote-Party-Id must map to calling-party-number in a Cisco gateway and
> this bug like to be a problem in redirect number.
> I dont see that this bug is related to SIP rpid.
> Also, the bug is reported in AS5300 platform
>
> ------ bug description -------
> Symptoms: Some Cisco ISDN switches do not support Redirecting Number (RDN)
> Information Element (IE) from user to network.
>
> Conditions: This symptom is observed on Cisco NTT, DMS100, and NET5
> switches.
> ------ bug description -------
>
>
>
> ----- Original Message -----
> From: "Steve Blair" <blairs at isc.upenn.edu>
> To: "Charles Galea" <charles.galea at maltacom.com>
> Cc: <serusers at lists.iptel.org>
> Sent: Tuesday, July 13, 2004 9:30 AM
> Subject: Re: [Serusers] Remote Party ID
>
> > There is a Cisco bug report that may also affect you. It is
> > CSCeb20959, Some Cisco ISDN switches do not support
> > Redirecting Number (RDN) Information Element (IE) from
> > user to network.
> >
> > _Steve
> >
> > Charles Galea wrote:
> > >Thanks a lot,
> > >
> > >i have included an authentication check before append_rpid_hf() and now
>
> it
>
> > >is working fine. Now I am trying to figure out why my 3600 gateway is
>
> still
>
> > >not sending the calling party field in the setup message.
> > >
> > >Regards,
> > >
> > >Charles
> > >
> > >
> > >----- Original Message -----
> > >From: "Bogdan-Andrei IANCU" <iancu at fokus.fraunhofer.de>
> > >To: "Charles Galea" <charles.galea at maltacom.com>
> > >Cc: <serusers at lists.iptel.org>; "'Andrew Caruana'"
>
> <andrew.caruana at maltacom.com>
>
> > >Sent: Monday, July 12, 2004 13:58
> > >Subject: Re: [Serusers] Remote Party ID
> > >
> > >>rpid is fetched from db during an authentication check. so, if you
> > >> don't have any authentication before append_rpid_hf(), we will not
> > >> have any
> > >
> > >rpid.
> > >
> > >>bogdan
> > >>
> > >>Charles Galea wrote:
> > >>>We have downloaded the latest ser software from cvs in order to
> > >>>support appending of remote party id while using mysql as the ser
> > >>>database.
> > >>>After compiling and installing the ser software we included the auth
> > >>>and auth_db parameters and also the append_rpid_hf() function in our
> > >>>ser.cfg file as shown below.
> > >>>
> > >>>SER server starts and registration is successfull however when
> > >>>forwarding to the pstn gateway, ser will not append the remote party
> > >>>id header, even if the rpid and uri columns in mysql database are
> > >>>populated accordingly using the serctl add rpid command. Calls are
> > >>>also successfull however the gateway will not include the calling
> > >>>party number in the setup message because the rpid header is missing.
> > >>>
> > >>>
> > >>>Any ideas please?
> > >>>
> > >>>Thanks
> > >>>
> > >>>Charles and Andrew
> > >>>
> > >>>
> > >>>
> > >>># ----------- global configuration parameters ------------------------
> > >>>
> > >>>#debug=3 # debug level (cmd line: -dddddddddd)
> > >>>#fork=yes
> > >>>#log_stderror=no # (cmd line: -E)
> > >>>
> > >>>/* Uncomment these lines to enter debugging mode
> > >>>debug=7
> > >>>fork=no
> > >>>log_stderror=yes
> > >>>*/
> > >>>
> > >>>check_via=no # (cmd. line: -v)
> > >>>dns=no # (cmd. line: -r)
> > >>>rev_dns=no # (cmd. line: -R)
> > >>>#port=5060
> > >>>#children=4
> > >>>fifo="/tmp/ser_fifo"
> > >>>
> > >>># ------------------ module loading ----------------------------------
> > >>>
> > >>>loadmodule "/our_downloads/sip_router/modules/mysql/mysql.so"
> > >>>#loadmodule "//lib/ser/modules/mysql.so"
> > >>>
> > >>>loadmodule "//lib/ser/modules/sl.so"
> > >>>loadmodule "//lib/ser/modules/tm.so"
> > >>>loadmodule "//lib/ser/modules/rr.so"
> > >>>loadmodule "//lib/ser/modules/maxfwd.so"
> > >>>loadmodule "//lib/ser/modules/usrloc.so"
> > >>>loadmodule "//lib/ser/modules/registrar.so"
> > >>>loadmodule "//lib/ser/modules/textops.so"
> > >>>
> > >>># Uncomment this if you want digest authentication
> > >>># mysql.so must be loaded !
> > >>>loadmodule "//lib/ser/modules/auth.so"
> > >>>loadmodule "//lib/ser/modules/auth_db.so"
> > >>>
> > >>>
> > >>>#loadmodule "//lib/ser/modules/acc.so"
> > >>>
> > >>># ----------------- setting module-specific parameters ---------------
> > >>>
> > >>># -- usrloc params --
> > >>>
> > >>>#modparam("usrloc", "db_mode", 0)
> > >>>
> > >>># Uncomment this if you want to use SQL database
> > >>># for persistent storage and comment the previous line
> > >>>modparam("usrloc", "db_mode", 1)
> > >>>
> > >>>
> > >>>
> > >>># -- auth params --
> > >>>
> > >>>
> > >>>modparam("auth_db", "use_rpid", 1)
> > >>>modparam("auth_db", "rpid_column", "rpid")
> > >>>modparam("auth", "rpid_prefix", "<sip:")
> > >>>modparam("auth", "rpid_suffix",
> > >>>"@testphone.com>:party=calling;screen=no;privacy=off")
> > >>>
> > >>>
> > >>>
> > >>>
> > >>># Uncomment if you are using auth module
> > >>>#
> > >>>modparam("auth_db", "calculate_ha1", yes)
> > >>>#
> > >>># If you set "calculate_ha1" parameter to yes (which true in this
> > >>>config),
> > >>># uncomment also the following parameter)
> > >>>#
> > >>>modparam("auth_db", "password_column", "password")
> > >>>
> > >>># -- rr params --
> > >>># add value to ;lr param to make some broken UAs happy
> > >>>modparam("rr", "enable_full_lr", 1)
> > >>>
> > >>>
> > >>>
> > >>># ------------------------- request routing logic -------------------
> > >>>
> > >>># main routing logic
> > >>>
> > >>>route{
> > >>>
> > >>> # initial sanity checks -- messages with
> > >>> # max_forwards==0, or excessively long requests
> > >>> if (!mf_process_maxfwd_header("10")) {
> > >>> sl_send_reply("483","Too Many Hops");
> > >>> break;
> > >>> };
> > >>> if ( msg:len > max_len ) {
> > >>> sl_send_reply("513", "Message too big");
> > >>> break;
> > >>> };
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> # we record-route all messages -- to make sure that
> > >>> # subsequent messages will go through our proxy; that's
> > >>> # particularly good if upstream and downstream entities
> > >>> # use different transport protocol
> > >>> record_route();
> > >>> # loose-route processing
> > >>> if (loose_route()) {
> > >>> t_relay();
> > >>> break;
> > >>> };
> > >>>
> > >>>
> > >>> # if the request is for other domain use UsrLoc
> > >>> # (in case, it does not work, use the following command
> > >>> # with proper names and addresses in it)
> > >>> if (uri=~"testphone.com") {
> > >>> lookup("aliases");
> > >>> if (method=="REGISTER") {
> > >>>
> > >>>#Uncomment this if you want to use digest authentication
> > >>> if (!www_authorize("testphone.com", "subscriber")) {
> > >>> www_challenge("testphone.com", "0");
> > >>> append_rpid_hf();
> > >>> break;
> > >>> };
> > >>>
> > >>>
> > >>>
> > >>> save("location");
> > >>> break;
> > >>> };
> > >>>
> > >>>
> > >>>
> > >>> if (uri=~"^sip:21") {
> > >>> append_rpid_hf();
> > >>> forward(a valid ip address for the gateway was
> > >>>inserted here);
> > >>> break;
> > >>> }
> > >>>
> > >>> if (uri=~"^sip:123") {
> > >>> forward(a valid ip address for the gareway was
> > >>>inserted here);
> > >>> break;
> > >>> }
> > >>>
> > >>>
> > >>> # native SIP destinations are handled using our USRLOC DB
> > >>> if (!lookup("location")) {
> > >>> sl_send_reply("404", "Not Found");
> > >>> break;
> > >>> };
> > >>> };
> > >>>
> > >>>
> > >>>
> > >>>
> > >>> # forward to current uri now; use stateful forwarding; that
> > >>> # works reliably even if we forward from TCP to UDP
> > >>> if (!t_relay()) {
> > >>> sl_reply_error();
> > >>> };
> > >>>
> > >>>
> > >>>}
> >>>
> >>>------------------------------------------------------------------------
> >>>
> > >>>_______________________________________________
> > >>>Serusers mailing list
> > >>>serusers at lists.iptel.org
> > >>>http://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >_______________________________________________
> > >Serusers mailing list
> > >serusers at lists.iptel.org
> > >http://lists.iptel.org/mailman/listinfo/serusers
> >
> > --
> >
> > ISC Network Engineering
> > The University of Pennsylvania
> > 3401 Walnut Street, Suite 221A
> > Philadelphia, PA 19104
> >
> >
> > voice: 215-573-8396
> >
> > 215-746-7903
> >
> > fax: 215-898-9348
> >
> > sip:blairs at upenn.edu
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list