[Serusers] SER loging and MySQL problems

[Klaus Darilion]

Have you really read the manual?
http://iptel.org/ser/doc/seruser/seruser.html
There's a section called "Accounting".

You have to use the acc module. Take also a look at the README of the 
acc module.

klaus

John Morrell wrote:
> I have ser-0.8.12 setup on Red Hat along with MySQL and SerWeb. Calls are
> being routed ok, but I can not seem to achieve any sort of logging or
> accounting of what is going on. I've followed examples and tutorials but
> still not progressed much further than routing the calls. I have included my
> ser.cfg below.
> 
> 
> #
> # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> #
> # simple quick-start config script
> #
> 
> # ----------- global configuration parameters ------------------------
> 
> /*
> debug=3         # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=no # (cmd line: -E)
> */
> 
> # Uncomment these lines to enter debugging mode
> debug=7
> fork=yes
> log_stderror=yes
> 
> 
> check_via=no # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/lib/ser/modules/mysql.so"
> 
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/lib/ser/modules/auth.so"
> loadmodule "/usr/lib/ser/modules/auth_db.so"
> 
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> #modparam("usrloc", "db_mode",   0)
> 
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
> modparam("usrloc", "db_url", "sql://ser:******@localhost/ser")
> 
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "password_column", "password")
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "db_url", "sql://ser:******@localhost/ser")
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> 
> 
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> 
> route{
> 
>  # initial sanity checks -- messages with
>  # max_forwards==0, or excessively long requests
>  if (!mf_process_maxfwd_header("10")) {
>   sl_send_reply("483","Too Many Hops");
>   break;
>  };
>  if ( msg:len > max_len ) {
>   sl_send_reply("513", "Message too big");
>   break;
>  };
> 
>  # we record-route all messages -- to make sure that
>  # subsequent messages will go through our proxy; that's
>  # particularly good if upstream and downstream entities
>  # use different transport protocol
>  record_route();
>  # loose-route processing
>  if (loose_route()) {
>   t_relay();
>   break;
>  };
> 
>  # if the request is for other domain use UsrLoc
>  # (in case, it does not work, use the following command
>  # with proper names and addresses in it)
>  if (uri==myself) {
> 
>   if (method=="REGISTER") {
> 
> # Uncomment this if you want to use digest authentication
> #   if (!www_authorize("iptel.org", "subscriber")) {
> #    www_challenge("iptel.org", "0");
> #    break;
> #   };
> 
>    save("location");
>    break;
>   };
> 
>   # native SIP destinations are handled using our USRLOC DB
>   if (!lookup("location")) {
>    sl_send_reply("404", "Not Found");
>    break;
>   };
> 
> 
>  };
>  # forward to current uri now; use stateful forwarding; that
>  # works reliably even if we forward from TCP to UDP
>  if (!t_relay()) {
>   sl_reply_error();
>  };
> 
> }
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
> 
>