[Serusers] Changes in serctl command and location table in 0.8.13

[Andres]

Hi,

In 0.8.13 the location table stores values as "username at domain" in the 
username column, but in previous versions it was just "username".  Is 
there is a config parameter to switch between one format and the other?

And the "serctl ul show <username>" never finds anyone, even though the 
"serctl ul show" command clearly shows them there.  For example:

serctl ul show 1040 at sip.telesip.net
404 Username 1040 in table location not found

and....
serctl ul show....

...Record(0x422be248)...
domain: 'location'
aor   : '1040 at sip.telesip.net'
~~~Contact(0x422be2b8)~~~
domain : 'location'
aor    : '1040 at sip.telesip.net'
Contact: 'sip:1040 at 200.118.1.1:5060;user=phone;transport=udp'
Expires: 594
q      :       0.00
Call-ID: '1436722947 at 200.118.1.1'
CSeq   : 63
replic : 0
State  : CS_DIRTY
Flags  : 0
next   : (nil)
prev   : (nil)
~~~/Contact~~~~

Is there anything obvious I am missing here?

Thanks,

-- 
Andres
Network Admin
http://www.telesip.net