[Serusers] "Out of Memory" errors

[Jan Janak]

It would be good if you could get the latest stable CVS version (if you
are not using it yet) and retry first.

Someone else reported a memory problem too, but it worked fine with the
latest stable CVS.

See http://iptel.org/ser/cvs

 Jan.

On 14-01 23:06, Jiri Kuthan wrote:
> Darren,
> 
> thank you for the report. Which SER version are you using?
> 
> What we need you to do is to recompile SER from sources in
> debug mode, set memlog<debug and resend the memory report.
> (In debug mode, the report identifies the fragments which
> is what we need to see.)
> 
> Thank you,
> 
> -jiri
> 
> At 08:27 PM 1/14/2004, Darren Nay wrote:
> >Hey All,
> > 
> >Since we have ramped up usage from about 2 SIP phones to 30 SIP phones on our SER boxes to start some testing we are now getting a LOT of "Out of memory" errors in the syslog.  
> > 
> >We were originally running on a Sun Ultra60 with Solaris 9 but changed to an Intel box running Redhat 9 since we thought that there might be some memory leaks on Solaris.  Unfortunately the problem exists regardless of the OS.  When we start SER, it usually works fine for about 5 mins and then it starts giving the errors.
> > 
> >We have plenty of memory on both servers that we have tested this on.  Over a gig on each.  Also, when I run top to check system resources it tells me that there is still over 800 meg of physical memory and over a gig of swap free even while SER is spitting out these errors.
> > 
> >The errors that we are seeing the logs are as follows:
> > 
> >Jan 14 13:32:45 jupiter /usr/sbin/ser[27179]: ERROR: build_req_buf_from_sip_req: out of memory 
> >Jan 14 13:32:45 jupiter /usr/sbin/ser[27179]: ERROR: print_uac_request: no pkg_mem 
> >Jan 14 13:32:45 jupiter /usr/sbin/ser[27179]: ERROR: t_forward_nonack: failure to add branches 
> >We get these over and over again in the syslog.
> > 
> >Anyone know the reason that we are getting these errors?  Is this a bug with SER?  or misconfiguration somehow on our part?  If so, how do we fix it?
> > 
> >I have included our ser.cfg file as an attachment to this email, and I have also included debug output from SER as a seperate attachment.
> > 
> >Any help would be very much appreciated!  Thanks,
> > 
> >Darren Nay - <mailto:dnay at libertyisp.com>dnay at libertyisp.com
> > 
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
> 
> --
> Jiri Kuthan            http://iptel.org/~jiri/ 
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers