[Serusers] BYE missage is missed

[jerk face]

--- Jiri Kuthan <jiri at iptel.org> wrote:
> in front of the t_relay which forwards the
> transaction you wish to report on. -jiri
> 

The only place I have t_relay is the loose forward
section.
if (loose_route()) {
     t_relay();
     break;
};

Should I place setflag(3) before t_relay() in this
section?  Or should it be in the section in which the
call is made?

In my ser.cfg (entire file is at the bottom of this
page) the call is made with the following lines:
if (uri=~"sip:1[0-9]+ at .*") {                
     rewritehostport("sip.provider.net:5060");
     setflag(2);
     if(!t_relay()) {
          sl_reply_error();
     };
     break;
};


::My ser.cfg ::
# ----------- global configuration parameters
------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)

/* Uncomment these lines to enter debugging mode
#debug=7
#fork=no
#log_stderror=yes
*/

check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

alias=mysip.mydomain.com
# ------------------ module loading
----------------------------------
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters
---------------
modparam("usrloc", "db_mode", 2)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("rr", "enable_full_lr", 1)
modparam("acc", "log_level", 2)
modparam("acc", "db_url",
"sql://ser:heslo@localhost/ser")
modparam("acc", "db_flag", 2)

# -------------------------  request routing logic
-------------------
# main routing logic
route{

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long
requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too
big");
                break;
        };

        # if the request is for other domain use
UsrLoc
        # (in case, it does not work, use the
following command
        # with proper names and addresses in it)

        # we record-route all messages -- to make sure
that
        # subsequent messages will go through our
proxy; that's
        # particularly good if upstream and downstream
entities
        # use different transport protocol
        record_route();
        # loose-route processing
        if (loose_route()) {
                t_relay();
                break;
        };


        if (uri=~"sip:1[0-9]+ at .*") {
               
rewritehostport("switch.myprovider.net:5060");
                setflag(2);
                if(!t_relay()) {
                        sl_reply_error();
                };
                break;
        };
        if (uri=~"sip:011[0-9]+ at .*") {
               
rewritehostport("switch.myprovider.net:5060");
                setflag(2);
                if(!t_relay()) {
                        sl_reply_error();
 };
                break;
        };


        if (uri==myself) {

                if (method=="REGISTER") {
                        if
(!www_authorize("mysip.mydomain.com", "subscriber")) {
                               
www_challenge("mysip.mydomain.com", "0");
                                break;
                        };

                        save("location");
                        break;
                };

                # native SIP destinations are handled
using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not
Found");
                        break;
                };
        };

        # forward to current uri now; use stateful
forwarding; that
        # works reliably even if we forward from TCP
to UDP
        if (!t_relay()) {
                sl_reply_error();
        };
lookup("aliases");
save("aliases");

}




=====
Asterisk is my lover, and IAX2 is our scented lubricant

__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/