[Serusers] SER + SEMS

Raphael Coeffic rco at iptel.org
Tue Feb 24 12:29:05 CET 2004 

Did you update to Ser 0.8.12 & Sems ser_rel_0_8_12 ?
Could send me all the logs (Ser+Sems)?

-Raphael.

----- Original Message ----- 
From: "Kapil Dhawan" <sersavvy at hotmail.com>
To: <serusers at lists.iptel.org>
Sent: Tuesday, February 24, 2004 12:19 PM
Subject: RE: [Serusers] SER + SEMS


>
> Hi I have got some improvement...now i am getting voicemail in my email
but
> after sending one email...i again get Wrong FIFO and then if i restart my
> sems and ser...it works for one more time.......same case always
>
> >From: "Kapil Dhawan" <sersavvy at hotmail.com>
> >To: serusers at lists.iptel.org
> >Subject: RE: [Serusers] SER + SEMS
> >Date: Tue, 24 Feb 2004 09:35:39 +0000
> >
> >I have tried to debug all this
> >
> >this is what i get]
> >(1185) DEBUG: run (AmServer.cpp:165): version= <0.2>
> >(1185) DEBUG: run (AmServer.cpp:170): fct_name= <sip_request.voicemail>
> >(1185) DEBUG: execute (AmServer.cpp:229): cmd.method= <INVITE>
> >(1185) DEBUG: execute (AmServer.cpp:230): cmd.user= <1111>
> >(1185) DEBUG: execute (AmServer.cpp:231): cmd.email=
> ><kdhawan at primus-direct.com>
> >(1185) DEBUG: execute (AmServer.cpp:232): cmd.domain= <203.196.128.126>
> >(1185) DEBUG: execute (AmServer.cpp:233): cmd.dstip= <203.196.128.126>
> >(1185) DEBUG: execute (AmServer.cpp:234): cmd.port= <>
> >(1185) DEBUG: execute (AmServer.cpp:235): cmd.r_uri=
> ><sip:1111 at 203.196.128.126;user=phone>
> >(1185) DEBUG: execute (AmServer.cpp:236): cmd.from_uri=
> ><sip:3333 at 203.196.128.122:5060;user=phone;transport=udp>
> >(1185) DEBUG: execute (AmServer.cpp:237): cmd.from=
> ><<sip:3333 at 203.196.128.126;user=phone> >
> >(1185) DEBUG: execute (AmServer.cpp:238): cmd.to=
> ><<sip:1111 at 203.196.128.126;user=phone>>
> >(1185) DEBUG: execute (AmServer.cpp:239): cmd.callid=
> ><04807096-50cc-1ba2-4fb4-0038cd0004f6 at 203.196.128.122>
> >(1185) DEBUG: execute (AmServer.cpp:240): cmd.from_tag= <32351>
> >(1185) DEBUG: execute (AmServer.cpp:241): cmd.to_tag= <>
> >(1185) DEBUG: execute (AmServer.cpp:244): cseq_str= <8>
> >(1185) DEBUG: execute (AmServer.cpp:249): cseq= <8>(8)
> >(1185) DEBUG: execute (AmServer.cpp:251): cmd.key= <31558:1504541206>
> >(1185) DEBUG: execute (AmServer.cpp:252): cmd.route= <>
> >(1185) DEBUG: execute (AmServer.cpp:253): cmd.next_hop= <>
> >(1185) DEBUG: execute (AmServer.cpp:259): hdrs: `P-MsgFlags: 0
> >Session-Expires: 1800
> >Min-SE: 1800
> >'
> >(1185) DEBUG: execute (AmServer.cpp:266): body: `v=0
> >o=SS-TA101 23265 23265 IN IP4 203.196.128.122
> >s=-
> >c=IN IP4 203.196.128.122
> >t=0 0
> >m=audio 54321 RTP/AVP 0 8 18 4 96
> >a=rtpmap:0 PCMU/8000
> >a=rtpmap:8 PCMA/8000
> >a=rtpmap:18 G729/8000
> >a=rtpmap:4 G723-63/8000
> >a=rtpmap:96 telephone-event/8000
> >a=fmtp:96 0-11
> >'
> >(1185) DEBUG: execute (AmServer.cpp:277): everything is OK !
> >(1185) DEBUG: onInvite (AnswerMachine.cpp:133): email address for user
> >'1111': kdhawan at primus-direct.com
> >(1185) DEBUG: startSession (AmSession.cpp:435): Starting session...
>
>(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6 at 203.196.128.12232351,sess_key=00
0004A12F57B1AE)
> >(1191) DEBUG: parse_sdp_attribute (AmSdp.cpp:596): unknown attribute
> >definition 'fmtp:96 0-11'
> >(1191) DEBUG: run (AmSession.cpp:124): dir=0; msg_flags=0
> >(1191) DEBUG: sendToFIFO (AmRequest.cpp:199):
> >msg=<:vm_reply:000004A7166E92A0
> >180
> >ringing
> >31558:1504541206
> >000004A12F57B1AE
> >Contact: <sip:1111 at 203.196.128.126>
> >.
> >.
> >
> >>
> >(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200
> >fifo_t_reply succeeded
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <>
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <>
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <>
> >(1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns
> >ret=getReturnCode=0
> >(1191) DEBUG: setLocalPort (AmRtpStream.cpp:129): setting random local
port
> >(1191) DEBUG: setLocalPort (AmRtpStream.cpp:158): local rtp port set to
> >35226
> >(1191) DEBUG: sendToFIFO (AmRequest.cpp:199):
> >msg=<:vm_reply:000004A756924871
> >200
> >OK
> >31558:1504541206
> >000004A12F57B1AE
> >Contact: <sip:1111 at 203.196.128.126>
> >Content-Type: application/sdp
> >.
> >v=0
> >o=username 0 0 IN IP4 203.196.128.126
> >s=session
> >c=IN IP4 203.196.128.126
> >t=0 0
> >m=audio 35226 RTP/AVP 0
> >a=rtpmap:0 PCMU/8000
> >.
> >
> >>
> >(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 200
> >fifo_t_reply succeeded
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:442): n_cmd.from_uri= <>
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:445): n_cmd.next_hop= <>
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:448): n_cmd.route= <>
> >(1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns
> >ret=getReturnCode=0
> >(1191) DEBUG: setRAddr (AmRtpStream.cpp:321): RTP remote address set to
> >203.196.128.122:54321
> >(1191) DEBUG: run (AmSession.cpp:143): Sending Rtp data to
> >203.196.128.122/54321
> >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:162): starting sending
> >announce...(/usr/local/lib/sems/audio/default.wav)
> >(1191) DEBUG: trying to read WAV file
> >(1191) DEBUG: tag = <RIFF>
> >(1191) DEBUG: file size = <129710>
> >(1191) DEBUG: tag = <WAVE>
> >(1191) DEBUG: tag = <fmt >
> >(1191) DEBUG: chunk_size = <18>
> >(1191) DEBUG: fmt = <01>
> >(1191) DEBUG: channels = <1>
> >(1191) DEBUG: rate = <8000>
> >(1191) DEBUG: bits/sample = <16>
> >(1191) DEBUG: tag = <fact>
> >(1191) DEBUG: chunk size = <4>
> >(1191) DEBUG: tag = <data>
> >(1191) DEBUG: chunk size = <129660>
> >
> >
> >
> >ERROR ERROR ERROR
> >
> >(1185) DEBUG: run (AmServer.cpp:165): version= <>
> >(1185) ERROR: run (AmServer.cpp:194): wrong FIFO Interface version.
> >
> >
> >
> >(1191) DEBUG: streamGet (AmAudio.cpp:479): 0-stuffing packet: adding 260
> >bytes (packet size=320)
> >(1191) DEBUG: convert (AmAudio.cpp:208): end of stream
> >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:164): ... announce
reaches
> >its end.
> >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:170): starting recording
> >message...(/tmp/04807096-50cc-1ba2-4fb4-0038cd0004f6 at 203.196.128.122.wav)
> >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:173): ... finished
> >recording message
> >(1191) DEBUG: sendToFIFO (AmRequest.cpp:199):
> >msg=<:t_uac_dlg:000004A7326ED90A
> >BYE
> >sip:3333 at 203.196.128.122:5060;user=phone;transport=udp
> >.
> >From: <sip:1111 at 203.196.128.126;user=phone>;tag=000004A12F57B1AE
> >To: <sip:3333 at 203.196.128.126;user=phone> ;tag=32351
> >CSeq: 9 BYE
> >Call-ID: 04807096-50cc-1ba2-4fb4-0038cd0004f6 at 203.196.128.122
> >Contact: <sip:1111 at 203.196.128.126>
> >.
> >.
> >
> >>
> >(1191) DEBUG: write_to_fifo (AmRequest.cpp:708): Write to fifo: completed
> >(1191) DEBUG: getReturnCode (AmRequest.cpp:421): response from Ser: 481
> >Call Leg/Transaction Does Not Exist
> >(1191) DEBUG: sendToFIFO (AmRequest.cpp:221): sendToFifo returns
> >ret=getReturnCode=0
> >(1191) ERROR: bye (AmRequest.cpp:243): AmRequest::bye: 481 Call
> >Leg/Transaction Does Not Exist
> >(1191) DEBUG: onSessionStart (AnswerMachine.cpp:179): recorded data size:
0
> >(1191) DEBUG: sadSession (AmSession.cpp:309): searching for session to
> >destroy
>
>(hash=04807096-50cc-1ba2-4fb4-0038cd0004f6 at 203.196.128.12232351,sess_key=00
0004A12F57B1AE)
> >(1191) DEBUG: findSession (AmSession.cpp:373): session found with key
> >(1191) DEBUG: destroySession (AmSession.cpp:331): sess_it !=
> >a_sessions.end()
> >(1191) DEBUG: destroySession (AmSession.cpp:334): it !=
> >sess_it->second.end()
> >(1191) DEBUG: destroySession (AmSession.cpp:341): session found: stopping
> >session
> >(1191) DEBUG: stopAndQueue (AmSession.cpp:289): session cleaner trying to
> >stop 80c8e18
> >(1191) DEBUG: postEvent (AmEventQueue.cpp:47): AmEventQueue: trying to
post
> >event
> >(1191) DEBUG: postEvent (AmEventQueue.cpp:55): AmEventQueue: event posted
> >(1191) DEBUG: destroySession (AmSession.cpp:343): session stopped and
> >destroyed (#sessions=0)
> >(1188) DEBUG: run (AmSession.cpp:242): Session cleaner starting its work
> >(1188) DEBUG: run (AmSession.cpp:256): session 80c8e18 has been
destroyed'
> >(1188) DEBUG: run (AmSession.cpp:279): Session cleaner finished
> >
> >
> >
> >>From: "Kapil Dhawan" <sersavvy at hotmail.com>
> >>To: serusers at lists.iptel.org
> >>Subject: [Serusers] SER + SEMS
> >>Date: Tue, 24 Feb 2004 07:29:16 +0000
> >>
> >>Hi All...
> >>
> >>i am running SER perfectly....Now i am facing problem with running
> >>SEMS....
> >>
> >>i have tried SER 0.8.12(current sems cvs update ) and 0.8.11(sems 0.11)
i
> >>am unable to do anything....
> >>
> >>
> >>whats happening is....
> >>
> >>my SER is already installed.....and working...now i am compiling it with
> >>vm module and making Multi Domain off (in 0.8.11) and its off in 0.8.12
as
> >>it depends upon domain module there....so no problem with multidomain
> >>support...so it works fine...following is the code of ser.cfg
> >>
> >>                if(method=="ACK" || method=="INVITE" || method=="BYE"){
> >>                  if (!t_newtran()) {
> >>                    log("could not create new transaction\n");
> >>                    sl_send_reply("500","could not create new
> >>transaction");
> >>                    break;
> >>                  };
> >>
> >>                if(!vm("/tmp/am_fifo", "voicemail")){
> >>
> >>                lookup("aliases");
> >>                if (!uri==myself) {
> >>                        append_hf("P-hint: outbound alias\r\n");
> >>                        route(1);
> >>                        break;
> >>                };
> >>
> >>                # native SIP destinations are handled using our USRLOC
DB
> >>                if (!lookup("location")) {
> >>                        sl_send_reply("404", "Not Found");
> >>                        break;
> >>                };
> >>                };
> >>                };
> >>
> >>
> >>Next....is i am compiling current version of sems...from cvs with
> >>following command
> >>
> >>CVSROOT=:pserver:anonymous at cvs.berlios.de:/cvsroot/sems
> >>export CVSROOT
> >>cvs co answer_machine
> >>
> >>now it also gets compiled with one or two erros of audio file paths
> >>etc...which i corrected in /etc/sems/sems.conf and enaled voicemail
module
> >>in it..
> >>
> >>Now when i run it sems -D 3 -E
> >>
> >>it shows me sems started successsfully.....but when i try and give a
call
> >>so that it shud be transfered to voicemail...in sems log i see ## Wrong
> >>FIFO Interface version ##
> >>
> >>due to which ...my wav file which is getting stored in /tmp folder is
> >>having 44 bytes size always...i know there is version conflict...but i
am
> >>unable to get proper matching versions of both.............
> >>
> >>kidly help me out...if u need i can attach any more info too...
> >>
> >>kapil
> >>
> >>_________________________________________________________________
> >>Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag
> >>Only on www.shaadi.com. Register now!
> >>
> >>_______________________________________________
> >>Serusers mailing list
> >>serusers at lists.iptel.org
> >>http://lists.iptel.org/mailman/listinfo/serusers
> >
> >_________________________________________________________________
> >Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag
> >Only on www.shaadi.com. Register now!
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
>
> _________________________________________________________________
> INDIA TODAY @ Rs. 5 + a free gift !
> http://www.indiatoday.com/itoday/intlsubscription/itsubs/it_offer.html
> Subcribe Now ...
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers

More information about the sr-users mailing list