[Serusers] eliminating 483 errors

[Ticknor.Scott at ic.gc.ca]

i attached one ser.cfg file. and a dump file from ngrep. it looks like a
bunch of INVITES. the Cisco phone B rings, but if i hang up Cisco phone A, B
continues to ring and ring...
and 483 errors every few seconds, what a mess.


> -----Original Message-----
> From: Klaus Darilion [mailto:klaus.mailinglists at pernau.at]
> Sent: Wednesday, February 18, 2004 9:22 am
> To: Ticknor, Scott: DGSE
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] eliminating 483 errors
> 
> 
> post your ser.cfg and a dump of the packets that causes the loop.
> 
> Klaus
> 
> Ticknor.Scott at ic.gc.ca wrote:
> > hello List,
> > i am sadly aware that the 483 problem is covered in the 
> Admin guide & faq.
> > the solution as i read it is to replace if (uri==myself) 
> with some regexp
> > for the sip proxy. but this is apparently not a proper 
> implementation, from
> > what i have read on the list. furthermore, the if 
> (uri==myself) expression
> > is further down in the logic, below the check for maxfwd 
> that results in the
> > 483. if have set SIP_DOMAIN and added aliases to ser.cfg. i 
> am sure i am
> > missing something small and simple...
> > my clients are cisco 7960 with sip fw v6.1.
> > 
> > thanks for reading,
> > 
> > scott t
> > DSi
> > 
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> > 
> > 
> 

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: dump.txt
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040218/69bc9017/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ser.cfg.483.txt
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040218/69bc9017/attachment-0001.txt>