[Serusers] messed up with config

[Madan]

hi
can somebody tell whats wrong with my cfg , as i can not make/recieve calls now..seems i have played too much it and now m confused as to what went wrong and where


#
# ----------- global configuration parameters ------------------------
debug=9         # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)
listen=localhost
/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/

check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
loadmodule "/usr/local/lib/ser/modules/group_radius.so"


# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode",   2)
modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("auth_radius", "service_type", 15)

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("acc", "log_level", 1)
modparam("acc", "radius_flag", 1)

# -------------------------  request routing logic -------------------
# main routing logic

route{
        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };



# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol

        record_route(); 

        # loose-route processing
        if (loose_route()) 
        {
                t_relay();
                break;
        };



# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
        if (uri==myself)
        {
               lookup("aliases");


               if (method=="REGISTER") {

                       log(1, "REGISTER: Authenticating user\n");

                       if (!radius_www_authorize("")) {
                               log(1, "REGISTER: challenging user\n");
                               www_challenge("", "0");
                               break;
                       };
                       save("location");
                       break;
               };

##########################################################################################################
                if (uri=~"^sip:44[127][0-9]+ at .*")
                {

                        if (rewritehostport("pstnrouter:5060"))
                        {
                                if (!t_relay())
                                {
                                        sl_reply_error();
                                };

                        }
                        break;
                }
                else if (uri=~"^sip:01[0-9]+ at .*")
                {
                        if (!t_relay())
                        {
                                sl_reply_error();
                        };
                        break;
                };


                # account completed transactions via syslog
                setflag(1);
        }

###############################################################################################################
        if (method=="INVITE") {

                log(1, "INVITE\n");
                setflag(1); /* set for accounting (the same value as in log_flag!) */
        };

        if (method=="MESSAGE") {
                log(1, "MESSAGE\n");
                setflag(1); /* set for accounting (the same value as in log_flag!) */
        };

        if (method=="BYE" || method=="CANCEL") {
                log (1, "BYE or CANCEL\n");
                setflag(1);
        };

        # native SIP destinations are handled using our USRLOC DB
        if (!lookup("location")) {
                sl_send_reply("404", "Not Found");
                break;
        };
        if (!t_relay()) {
                sl_reply_error();
                break;
        };

}
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040213/6ff7823a/attachment.htm>