[Serusers] problem with ivr +sems+ t_realy not available

[serdiehard]

hello friends,

iam useing the sems+ivr when i run the sems with 

ivr support it gives me the message as 

 ERROR: reply (AmRequest.cpp:335):
AmRequestUAS::reply: 500 command 't_reply' not
available


as suggested in the list i did serctl fifo which

in this list there is no function t_relay

so how do i need to proceed from here

to get the sucess

here is my sems.conf
*****************************



##################################
# global parameters              #
##################################

# optional parameter: fork={yes|no}
#
# - specifies if sems should run in daemon mode
(background)
#   (fork=no is the same as -E)
fork=yes

# optional parameter: stderr={yes|no}
#
# - debug mode: do not fork and log to stderr
#   (stderr=yes is the same as -E)
stderr=no

# optional parameter: loglevel={0|1|2|3}
#
# - sets log level (error=0, warning=1, info=2,
debug=3)
#   (same as -D)
loglevel=1

# optional parameter: fifo_name=<filename>
#
# - path and file name of our fifo file (same as -i)
fifo_name=/tmp/am_fifo

# optional parameter: ser_fifo_name=<filename>
#
# - path and file name of Ser's fifo file (same as -o)
ser_fifo_name=/tmp/ser_fifo

# optional parameter: socket_name=<filename>
#
# - path and file name of our unix socket
#socket_name=/tmp/am_sock

# optional parameter: ser_socket_name=<filename>
#
# - path and file name of Ser's unix socket
#ser_socket_name=/tmp/ser_sock

# optional parameter: send_method=<filename>
#
# - sets which method will be used to contact Ser:
#   FIFO or unix socket server.
# - values: fifo (default), unix_socket
#
# - PLEASE NOTE THAT: if you use 'fifo', make sure
that
#   fifo_name and ser_fifo_name have been set. if you
use 'unix_socket',
#   make sure that socket_name and ser_socket_name
have been set.
#
#send_method=unix_socket

# optional parameter: plugin_path=<path>
#
# - sets the path to the plug-ins
# - may be absolute or relative to CWD
plugin_path=/usr/local/lib/sems/plug-in

# optional parameter: smtp_server=<hostname>
#
# - sets address of smtp server
smtp_server=localhost

# optional parameter: smtp_port=<port>
#
# - sets port of smtp server
smtp_port=25

# optional parameter: rtp_low_port=<port>
#
# - sets port of rtp lowest server
#rtp_low_port=1024

# optional parameter: rtp_high_port=<port>
#
# - sets port of rtp highest server
#rtp_high_port=65535

##################################
# module specific parameters     #
##################################

# sample voicemail configuration (inline)
config.voicemail=inline

# optional parameter: rec_file_extension=<ext>
#
# - sets the file extension which will be used
#   to record messages.
# - example 1: wav
# - example 2: mp3
#
# WARNING: you must compile the mp3 plug-in
#          in order to use 'mp3' as default
#          extension. You will need the lame
#          encoder for that.
#          See plug-in/mp3/ReadmeMP3.txt for
#          more information.
#
rec_file_extension=wav

# optional parameter: announce_path=<path>
#
# - sets the path where announce files are searched
for
# - the file to be played is determined the following
way:
#   <announce_path>/<domainname>/<username>.wav
#   if this file is not available
<announce_path>/<default_anounce> is used
announce_path=/usr/local/lib/sems/audio/

# parameter: default_announce=<filename>
#
# - sets the name of the default announce WAV file
default_announce=default_en.wav

# parameter: max_record_time=<seconds>
#
# - maximum record time
max_record_time=30

# parameter: accept_delay=<x>
#
# - delays accepting of the call for x seconds
# - default value is 0
accept_delay=0

# parameter: email_template_path=<filename>
#
# - email templates path
#
# See the README file in <sems-src>/plug-in/voicemail
# for more information on the syntax used.
#
email_template_path=/usr/local/etc/sems/

# end of configuration section for voicemail module
config.voicemail=end


# sample announcement configuration (inline)
config.announcement=inline

# optional parameter: announce_path=<path>
#
# - sets the path where announce files are searched
for
announce_path=/usr/local/lib/sems/audio/

# parameter: default_announce=<filename>
#
# - sets the name of the default announce WAV file
default_announce=default_en.wav

# end of configuration section for announcement module
config.announcement=end


# sample isdngw module configuration (external file)
# config.isdngw=/etc/isdngw.conf

# sample ivr module configuration (inline)
config.ivr=inline
#
#
# The IVR checks for a script with the named of the
callee
# (<local part in r-uri>.py for python, <local part in
r-uri>.pl for perl)
# in the directory <ivr_script_path><domain>, then for
# <ivr_script_path><domain><ivr_script_file>. If this
is  not found,
# <ivr_script_path>/<local part in r-uri>.py if
searched,
# and if this is not found,
<ivr_script_path>/<ivr_script_file> is used.
#
# So with a call to sayer at iptel.org and
#ivr_script_path=/etc/ivr and
#ivr_script_file=ivr.py
# these files are checked:
#/etc/ivr/iptel.org/sayer.py
#/etc/ivr/iptel.org/ivr.py
#/etc/ivr/sayer.py
#/etc/ivr/ivr.py
#

#config.ivr=inline


#python_scrit_path=/root/answer_machine/plugin/ivr/

#python_script_file=ivr.py

#config.ivr=end

  #parameter: ivr_script_path:
  # path to ivr scripts.
  #
 
ivr_script_path=/root/answer_machine/plugin/ivr/script
  # default script file: this will be executed if
<user>.py does not exist.
  #
  ivr_script_file=ivr.py

  # parameter : tts_caching
  #     y or n
  #       text will be read from waves already
synthesized and
  #     cached in cache_path
  tts_caching=y

  # parameter : tts_cache_path
  #     path to cache waves
  #     path must exist!
  tts_cache_path=/tmp/wavs
# end of configuration section for ivr module

config.ivr=end

config.conference=inline


 # parameter: default_announce=<filename>
 #
 # - sets the full pathed name of the default announce
WAV file.
 #   Will be played to lonely users.

default_announce=/usr/local/lib/sems/audio/first_participant.wav

 # end of configuration section for conference module
 config.conference=end

# example configuration for number reader
 config.number_reader=inline

 number_path=/usr/local/lib/sems/audio/

 prolog_file=welcome_to_number_reader.wav

 epilog_file=thanks_calling_number_reader.wav

 # end of number_reader configuration
 config.number_reader=end


**********************************

my aim is to run the ivr.py when there is any invite



with regards
serdiehard


		
__________________________________ 
Do you Yahoo!? 
Send holiday email and support a worthy cause. Do good. 
http://celebrity.mail.yahoo.com