[Serusers] VoiceMail Help
Veselin Iordanov
viordanov at hotmail.com
Wed Aug 25 03:16:01 CEST 2004
hi tnx but that dont change anything
now fifo for ser.cfg is /tmp/ser_fifo
and for voicemail is /tmp/vm_ser_fifo
and SEMS have /tmp/am_fifo
and use /tmp/vm_ser_fifo to comunicate with SER
but have absolutly the same error
is it posible becouse i use SER 0.8.14 ?
----- Original Message -----
From: "Juan" <juan at korreo.com.ar>
To: "Veselin Iordanov" <veselin_iordanov at hotmail.com>
Cc: <serusers at lists.iptel.org>
Sent: Wednesday, August 25, 2004 3:08 PM
Subject: Re: [Serusers] VoiceMail Help
> Hello Veselin,
> For t_reply not available, check attached email.
> In ser.cfg take into account that fifo should be different for ser proxy
> (port 5060) and ser voicemail (port 5090). You have the same fifo for
> both (fifo="/tmp/ser_fifo" ); check the other attached email.
>
> Juan Priotti
>
>
>
>
> Veselin Iordanov wrote:
>
> > ok i found example configuration fails for making ser+sems+voice mail
> > somewhare in the mailing list but have one strange problem..
> > all of the servers are on one PC
> > This is a configuration files
> > 1. conf file for main ser server
> > #
> > # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> > #
> > # simple quick-start config script
> > #
> >
> > # ----------- global configuration parameters ------------------------
> >
> > debug=3 # debug level (cmd line: -dddddddddd)
> > fork=yes
> > log_stderror=no # (cmd line: -E)
> >
> >
> > # Uncomment these lines to enter debugging mode
> > /*
> > debug=7
> > fork=no
> > log_stderror=yes
> > */
> >
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > listen=80.72.85.178
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> > alias=testinfo.intersoftpro.com 127.0.0.1 80.72.85.178
> >
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > loadmodule "/usr/local/lib/ser/modules/textops.so"
> >
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> >
> > # load the voicemail module
> > #loadmodule "/usr/local/lib/ser/modules/vm.so"
> >
> > # load the enum module
> > loadmodule "/usr/local/lib/ser/modules/enum.so"
> >
> > # load the group module, to verify if a user forwards to voicemail
> > loadmodule "/usr/local/lib/ser/modules/group.so"
> >
> > # load the nathelper module
> > loadmodule "/usr/local/lib/ser/modules/nathelper.so"
> >
> > # ----------------- setting module-specific parameters ---------------
> >
> > # -- registrar parameter
> > # special NAT flag indicates that a registered client is behind NAT
> > modparam("registrar", "nat_flag", 6)
> >
> > # -- usrloc params --
> >
> > #modparam("usrloc", "db_mode", 0)
> >
> > # Uncomment this if you want to use SQL database
> > # for persistent storage and comment the previous line
> > modparam("usrloc", "db_mode", 2)
> > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> >
> > # -- auth params --
> > # Uncomment if you are using auth module
> > #
> > modparam("auth_db", "calculate_ha1", yes)
> > #
> > # If you set "calculate_ha1" parameter to yes (which true in this
> > config),
> > # uncomment also the following parameter)
> > #
> > modparam("auth_db", "password_column", "password")
> > modparam("auth_db", "db_url", "mysql://ser:heslo@localhost/ser")
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> > modparam("rr", "enable_full_lr", 1)
> >
> > # -- voicemail params --
> > #modparam("voicemail", "db_url","mysql://ser:heslo@localhost/ser")
> >
> > # -- voicemail params --
> > modparam("group", "db_url","mysql://serro:heslo@localhost/ser")
> >
> > # -- nathelper params --
> > modparam("nathelper", "natping_interval", 60)
> > modparam("nathelper", "ping_nated_only", 1)
> >
> > modparam("tm", "fr_inv_timer", 30 )
> > #modparam("tm", "fr_inv_timer", 8 )
> >
> > # ------------------------- request routing logic -------------------
> >
> > # main routing logic
> >
> > route{
> > log(1, "-------------------------------------------\n");
> > log(1, "entering main loop\n");
> >
> > if (nat_uac_test("2")) {
> > log(1, "src address different than via header->NAT detected\n");
> > log(1, "force_rport and fix_nated_contact and setflag(5)\n");
> > #try NAT traversal, works only if the client is symmetrical
> > force_rport();
> > fix_nated_contact();
> > append_hf("P-hint: fixed NAT contact for request\r\n");
> > # flag 5 indicates that incoming request is from NATed client
> > setflag(5);
> > };
> >
> > if (method=="REGISTER")
> > log(1, "REGISTER message received\n");
> >
> > if (method=="INVITE")
> > log(1, "INVITE message received\n");
> >
> > if (method=="ACK")
> > log(1, "ACK message received\n");
> >
> > if (method=="BYE")
> > log(1, "BYE message received\n");
> >
> > if (method=="CANCEL")
> > log(1, "CANCEL message received\n");
> >
> > if (method=="SUBSCRIBE")
> > log(1, "SUBSCRIBE message received\n");
> >
> > if (method=="NOTIFY")
> > log(1, "NOTIFY message received\n");
> >
> > if (method=="OPTIONS")
> > log(1, "OPTIONS message received\n");
> >
> > if (method=="INFO")
> > log(1, "INFO message received\n");
> >
> > if (method=="MESSAGE")
> > log(1, "MESSAGE message received\n");
> >
> > if (method=="REFER")
> > log(1, "REFER message received\n");
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> >
> > if (msg:len > max_len) {
> > #if (len_gt( max_len )) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # loose-route processing
> > if (loose_route()) {
> > log(1, "loose_route processing\n");
> > t_relay();
> > break;
> > };
> >
> > # create transaction state; abort if error occured
> > # if ( !t_newtran()) {
> > # sl_reply_error();
> > # break;
> > # };
> >
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> > if (uri==myself) {
> >
> > if (method=="REGISTER") {
> > log(1, "analyzing REGISTER request\n");
> > # Uncomment this if you want to use digest authentication
> > if (!www_authorize("80.72.85.178", "subscriber")) {
> > www_challenge("80.72.85.178", "0");
> > break;
> > };
> >
> > if (isflagset(5)) {
> > #register from nated client, save nat_flag=6
> > #in location table
> > setflag(6);
> > };
> > if (!save("location")) {
> > log(1, "save location error\n");
> > sl_reply_error();
> > };
> > break;
> > };
> >
> > lookup("aliases");
> >
> > # check if number beginns with 00, then convert it into a +
> > if (uri=~"^sip:359[0-9]*@") {
> > log(1, "00 International number detected\n");
> > # strip booth leading "0"
> > strip(2);
> > prefix("+");
> > };
> > # check if request uri begins with an internation phone
> > number, if yes, try enum to resolve
> > if (uri=~"^sip:\+[0-9]*@") {
> > log(1, "+ International number detected\n");
> > if (!enum_query("voice")) {
> > log(1, "ENUM query failed, try enum without voice
> > prefix\n");
> > if (enum_query("")) {
> > log(1, "ENUM without voice prefix also failed\n");
> > };
> > };
> >
> > if (uri != myself) {
> > log(1, "ENUM lookup revealed an external address,
> > relaying...");
> > route(1);
> > break;
> > };
> > };
> >
> > #mark transaction for voicemail
> > if (is_user_in("Request-URI", "voicemail\n")) {
> > log(1, "requested user is in voicemail group");
> > setflag(4);
> > };
> >
> > # native SIP destinations are handled using our USRLOC DB
> > if (!lookup("location")) {
> > # handle user which was not found
> > log(1, "requested user not found\n");
> > route(4);
> > break;
> > };
> > };
> >
> > #add failure route which should be performed if response code >=300
> > if (method=="INVITE" && isflagset(4)) {
> > log(1, "invite for voicemail user->initiate failureroute[1]\n");
> > t_on_failure("1");
> > };
> >
> > # forward to current uri now; use stateful forwarding; that
> > # works reliably even if we forward from TCP to UDP
> >
> > route(1);
> > }
> >
> > route[1]{
> > log(1, "-------------------------------------------\n");
> > log(1, "entering route[1] - relaying SIP message\n");
> > if ((isflagset(5)) || (isflagset(6))) {
> > log(1, "at least one of the participants is
> > NATed->record_route\n");
> > record_route();
> > log(1, " -->setting up reply
processing ->onreply_route[1]");
> > t_on_reply("1");
> > if (method=="INVITE") {
> > log(1, " INVITE request-->force_rtp_proxy, set
> > NATED-INVITE flag(7)");
> > force_rtp_proxy();
> > append_hf("P-hint: request forced to rtp proxy\r\n");
> > setflag(7);
> > };
> > };
> >
> > log(1, "relaying message ...\n");
> > if (!t_relay()) {
> > log(1, "t_relay error occured\n");
> > sl_reply_error();
> > };
> >
> > }
> >
> > # all incoming replies for t_onrepli-ed transactions enter here
> > onreply_route[1] {
> > log(1, "-------------------------------------------\n");
> > log(1, "onreply_route[1] entered\n");
> >
> > if (isflagset(6)) {
> > log(1, "transaction was sent to a NATED client -> fix nated
> > contact\n");
> > fix_nated_contact();
> > append_hf("P-hint: fixed NAT contact for response\r\n");
> > }
> >
> > if ( (status=~"100") ) {
> > log(1, "status 100 received\n");
> > };
> >
> > if ( (status=~"180") ) {
> > log(1, "status 180 received\n");
> > };
> >
> > if ( (status=~"202") ) {
> > log(1, "status 202 received\n");
> > };
> >
> > if ( (status=~"200" || status=~"183") ) {
> > log(1, "status 2xx or 183");
> > if ( isflagset(7) ) {
> > log(1, "marked(7) as NATED-INVITE -> force_rtp_proxy \n");
> > force_rtp_proxy();
> > append_hf("P-hint: response forced to rtp proxy\r\n");
> > };
> > };
> > }
> >
> > route[4]{
> > log(1, "-------------------------------------------\n");
> > log(1, "entering route[4] = requested user not online\n");
> > # non-Voip -- just send "off-line"
> > if (!(method == "INVITE" || method == "ACK" || method == "CANCEL"
> > || method == "REFER" || method == "BYE")) {
> > log(1, "no invite,ack,cancel,refer->return 404\n");
> > sl_send_reply("404", "Not Found");
> > break;
> > };
> >
> > # not voicemail subscriber and no echo/conference call
> > if ( isflagset(4)) {
> > log(1, "flag(4) active\n");
> > };
> > if (uri =~ "conference") {
> > log(1, "conference call\n");
> > };
> > if (uri =~ "echo") {
> > log(1, "echo call\n");
> > };
> > if ( !( isflagset(4) || (uri =~ "conference") || (uri =~ "echo") )
> > ) {
> > log(1, "no voicemail subscriber->return 404");
> > sl_send_reply("404", "Not Found and no voicemail turned on");
> > break;
> > };
> >
> > if ( isflagset(5) ) {
> > log(1, "caller is NATed->record_route\n");
> > record_route();
> > log(1, " -->setting up reply processing
> > ->onreply_route[1]");
> > t_on_reply("1");
> > if (method=="INVITE") {
> > log(1, " INVITE request-->force_rtp_proxy");
> > force_rtp_proxy();
> > };
> > };
> >
> > # forward to voicemail now
> > #rewritehostport("machtnix.ict.tuwien.ac.at:5060");
> > log(1, "forward to voicemail\n");
> > t_relay_to_udp("80.72.85.178", "5090");
> >
> > #klaus
> > #forward(machtnix.ict.tuwien.ac.at, 5060)
> > }
> >
> >
> >
> > failure_route[1] {
> > /* XX: note: unsafe if preloaded routes without username used */
> > log(1, "-------------------------------------------\n");
> > log(1, "failureroute[1] entered\");
> > revert_uri();
> > #rewritehostport("machtnix.ict.tuwien.ac.at:5060");
> > # append_branch();
> > t_relay_to_udp("machtnix.ict.tuwien.ac.at", "5060");
> > }
> >
> > 2. Conf File for second instance of the ser server (voice mail )
> > #
> > # $Id: voicemail.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> > #
> > # simple quick-start config script
> > #
> >
> > # ----------- global configuration parameters ------------------------
> >
> > debug=3 # debug level (cmd line: -dddddddddd)
> > fork=yes
> > log_stderror=no # (cmd line: -E)
> >
> >
> > #Uncomment these lines to enter debugging mode
> > /*
> > debug=7
> > fork=no
> > log_stderror=yes
> > */
> >
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > listen=80.72.85.178
> > port=5090
> > children=4
> > fifo="/tmp/ser_fifo"
> > alias=testinfo.intersoftpro.com 127.0.0.1 80.72.85.178
> >
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> >
> > # load the voicemail module
> > loadmodule "/usr/local/lib/ser/modules/vm.so"
> >
> > # ----------------- setting module-specific parameters ---------------
> >
> > modparam("voicemail", "db_url","mysql://ser:heslo@localhost/ser")
> >
> > # ------------------------- request routing logic -------------------
> >
> > # main routing logic
> >
> > route{
> > log(1, "entering main loop\n");
> > if (method=="REGISTER")
> > log(1, "REGISTER message received\n");
> >
> > if (method=="INVITE")
> > log(1, "INVITE message received\n");
> >
> > if (method=="ACK")
> > log(1, "ACK message received\n");
> >
> > if (method=="BYE")
> > log(1, "BYE message received\n");
> >
> > if (method=="CANCEL")
> > log(1, "CANCEL message received\n");
> >
> > if (method=="SUBSCRIBE")
> > log(1, "SUBSCRIBE message received\n");
> >
> > if (method=="NOTIFY")
> > log(1, "NOTIFY message received\n");
> >
> > if (method=="OPTIONS")
> > log(1, "OPTIONS message received\n");
> >
> > if (method=="INFO")
> > log(1, "INFO message received\n");
> >
> > if (method=="MESSAGE")
> > log(1, "MESSAGE message received\n");
> >
> > if (method=="REFER")
> > log(1, "REFER message received\n");
> >
> > # lookup("aliases");
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> >
> > # check changed from 0.8.11 to 0.8.12
> > # if (len_gt( max_len )) {
> > if (msg:len > max_len) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # if (!uri==myself) {
> > # sl_send_reply("404", "not reponsible for host in request-uri");
> > # break;
> > # };
> >
> >
> >
> > # Voicemail specific configuration - begin
> >
> > if(method=="ACK" || method=="INVITE" || method=="BYE" ||
> > method=="REFER" || method=="CANCEL"){
> > log(1, "Entering voicemail processing\n");
> >
> > log(1, "check if new transaction ... \n");
> > if(t_newtran()){
> > log(1, "... yes, new transaction\n");
> > t_reply("100","voicemail ser - Trying -- just wait a
> > minute !");
> > t_reply("100","voicemail ser - Trying 2 -- just wait a
> > minute !");
> > if(method=="INVITE" || method=="REFER"){
> > log("**************** vm start - begin
> > ******************\n");
> > if( uri =~ "conference" ){
> > log(1, "incoming conference call\n");
> > if(!vm("/tmp/am_fifo","conference")){
> > log("could not contact conference
server\n");
> > t_reply("500","could not contact
> > conference server");
> > };
> > }
> > else if( uri =~ "echo" ){
> > log(1, "incoming echo call\n");
> > if(!vm("/tmp/am_fifo","echo")){
> > log("could not contact echo\n");
> > t_reply("500","could not contact echo");
> > };
> > }
> > else {
> > log(1, "incoming voicemail call\n");
> > if(!vm("/tmp/am_fifo","voicemail")){
> > log("could not contact voicemail\n");
> > t_reply("500","could not contact
voicemail");
> > };
> > };
> > log("**************** vm start - end
> > ******************\n");
> > break;
> > };
> >
> > if(method=="BYE" || method=="CANCEL"){
> > log("**************** vm end/refer - begin
> > ******************\n");
> > if(!vm("/tmp/am_fifo","bye")){
> > log("could not contact the media server\n");
> > t_reply("500","could not contact the media
> > server");
> > };
> > log("**************** vm end/refer - end
> > ********************\n");
> > break;
> > };
> > }
> > else {
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new transaction");
> > };
> > };
> >
> > # Voicemail specific configuration - end
> >
> > sl_send_reply("501", "method not understood here");
> > log(1, "method not understood here\n");
> >
> > }
> > 3 Sems configuration fail
> > # $Id: sems.conf.sample,v 1.11.2.1 2004/01/27 15:08:28 rco Exp $
> > #
> > # sems.conf.sample
> > #
> > # Sip Express Media Server (sems)
> > #
> > # sample configuration file
> > #
> > #
> > # whitespaces (spaces and tabs) are ignored
> > # comments start with a "#" and may be used inline
> > #
> > # example: option=value1, value2 # i like this option
> > #
> >
> > ##################################
> > # global parameters #
> > ##################################
> >
> > # optional parameter: fork={yes|no}
> > #
> > # - specifies if sems should run in daemon mode (background)
> > # (fork=no is the same as -E)
> > fork=yes
> >
> > # optional parameter: stderr={yes|no}
> > #
> > # - debug mode: do not fork and log to stderr
> > # (stderr=yes is the same as -E)
> > stderr=no
> >
> > # optional parameter: loglevel={0|1|2|3}
> > #
> > # - sets log level (error=0, warning=1, info=2, debug=3)
> > # (same as -D)
> > loglevel=1
> >
> > # optional parameter: fifo_name=<filename>
> > #
> > # - path and file name of our fifo file (same as -i)
> > fifo_name=/tmp/am_fifo
> >
> > # optional parameter: ser_fifo_name=<filename>
> > #
> > # - path and file name of Ser's fifo file (same as -o)
> > ser_fifo_name=/tmp/ser_fifo
> >
> > # optional parameter: plugin_path=<path>
> > #
> > # - sets the path to the plug-ins
> > # - may be absolute or relative to CWD
> > plugin_path=/usr/local/lib/sems/plug-in/
> >
> > # optional parameter: smtp_server=<hostname>
> > #
> > # - sets address of smtp server
> > smtp_server=localhost
> >
> > # optional parameter: smtp_port=<port>
> > #
> > # - sets port of smtp server
> > smtp_port=25
> >
> >
> > ##################################
> > # module specific parameters #
> > ##################################
> >
> > # sample voicemail configuration (inline)
> > config.voicemail=inline
> >
> > # optional parameter: announce_path=<path>
> > #
> > # - sets the path where announce files are searched for
> > # - the file to be played is determined the following way:
> > # <announce_path>/<domainname>/<username>.wav
> > # if this file is not available <announce_path>/<default_anounce> is
> > used
> > announce_path=/usr/local/lib/sems/audio/
> >
> > # parameter: default_announce=<filename>
> > #
> > # - sets the name of the default announce WAV file
> > default_announce=default_en.wav
> >
> > # parameter: max_record_time=<seconds>
> > #
> > # - maximum record time
> > max_record_time=30
> >
> > # parameter: accept_delay=<x>
> > #
> > # - delays accepting of the call for x seconds
> > # - default value is 0
> > accept_delay=20
> >
> > # end of configuration section
> > # for voicemail module
> > config.voicemail=end
> >
> >
> > # sample announcement configuration (inline)
> > config.announcement=inline
> >
> > # optional parameter: announce_path=<path>
> > #
> > # - sets the path where announce files are searched for
> > announce_path=/usr/local/lib/sems/audio/
> >
> > # parameter: default_announce=<filename>
> > #
> > # - sets the name of the default announce WAV file
> > default_announce=default_en.wav
> >
> > # end of configuration section for announcement module
> > config.announcement=end
> >
> >
> > # sample isdngw module configuration (external file)
> > # config.isdngw=/etc/isdngw.conf
> >
> > # sample ivr module configuration (inline)
> > config.ivr=inline
> >
> > #parameter: python_script_path=<full path>
> > python_script_path=/etc/ivr
> >
> > #parameter: python_script_file=<filename>
> > python_script_file=example.py
> >
> > # end of configuration section for ivr module
> > config.ivr=end
> >
> >
> > # sample conference configuration (inline)
> > config.conference=inline
> >
> > # parameter: default_announce=<filename>
> > #
> > # - sets the full pathed name of the default announce WAV file.
> > # Will be played to lonely users.
> > default_announce=/usr/local/lib/sems/audio/first_participant.wav
> >
> > # end of configuration section for conference module
> > config.conference=end
> >
> > # example configuration for number reader
> > config.number_reader=inline
> >
> > number_path=/usr/local/lib/sems/audio/
> >
> > prolog_file=welcome_to_number_reader.wav
> >
> > epilog_file=thanks_calling_number_reader.wav
> >
> > # end of number_reader configuration
> > config.number_reader=end
> >
> > # add more module configurations here (inline or external):
> > #
> > # config.mymodule=<filename>
> > # or
> > # config.mymodule=inline
> > # ...
> > # config.mymodule=end
> >
> > and i got this error into second instance of the ser server
> > 0(19586) **************** vm start - end ******************
> > 0(19586) DEBUG:destroy_avp_list: destroing list (nil)
> > 0(19586) receive_msg: cleaning up
> > 2(19588) ERROR: fifo_server: command t_reply is not available
> > 2(19588) ERROR: fifo_server: command must begin with :: ringing
> > 2(19588) ERROR: fifo_server: command must begin with :: 00004C89728793F0
> > 2(19588) ERROR: fifo_server: command must have at least 3 chars
> > 2(19588) INFO: fifo_server: command empty
> > 2(19588) ERROR: fifo_server: command t_reply is not available
> > 2(19588) ERROR: fifo_server: command must have at least 3 chars
> > 2(19588) ERROR: fifo_server: command must begin with :: 00004C89728793F0
> > 2(19588) ERROR: fifo_server: command must begin with :: Content-Type:
> > application/sdp
> > 2(19588) ERROR: fifo_server: command must begin with :: v=0
> > 2(19588) ERROR: fifo_server: command must begin with :: s=session
> > 2(19588) ERROR: fifo_server: command must begin with :: t=0 0
> > 2(19588) ERROR: fifo_server: command must begin with :: a=rtpmap:0 /
> > 2(19588) INFO: fifo_server: command empty
> > 2(19588) ERROR: fifo_server: command t_reply is not available
> > 2(19588) ERROR: fifo_server: command must begin with :: could not send
> > response.
> > 2(19588) ERROR: fifo_server: command must begin with :: 00004C89728793F0
> > 2(19588) ERROR: fifo_server: command must have at least 3 chars
> > 2(19588) INFO: fifo_server: command empty
> >
> > Tnx in advance
> >
> > _________________________________________________________________
> > Help STOP SPAM with the new MSN 8 and get 2 months FREE*
> > http://join.msn.com/?page=features/junkmail
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
>
>
More information about the sr-users
mailing list