[Serusers] has any body got success with ser-0.8.12 with cpl-c module
Richard
mypop3mail at yahoo.com
Fri Aug 13 10:31:54 CEST 2004
cpled uses java. So ps would show java process.
are you running cpled on the same machine as ser?
You can use fifo, just search achive on how to do it.
Richard
--- ser die <serdiehard at yahoo.com> wrote:
> hello richards,
>
> does cpled exist as a independent process
>
> can we check with the command ps -ef
>
> how to ensure that cpled process is running
>
> when i use the command ngrep port 5060 -d lo
>
> it s not showing any messages
>
> in ethereal it s showing 401 message i think
>
> unauthorised and that client is not registering
>
>
> with regards
> serdiehard
>
> --- Richard <mypop3mail at yahoo.com> wrote:
>
> > it should be "ngrep port 5060 -d lo" if cpled is
> > running on the same host as ser.
> >
> > --- ser die <serdiehard at yahoo.com> wrote:
> >
> > >
> > > --- Richard <mypop3mail at yahoo.com> wrote:
> > >
> > > > Not quite sure if cpled is sending the
> message.
> > > Can
> > > > you ngrep the sip message? If it sends from
> > > > localhost,
> > > > need to use option "-d lo". A good cpl-c
> > register
> > > > log
> > > > is like this, (mime found 3, 4, not 0, 0)
> > > >
> > > > DEBUG:cpl_process_register: Content-Type mime
> > > found
> > > > 3,
> > > > 4
> > > > DEBUG:cpl_process_register: carrying CPL ->
> look
> > > at
> > > > Content-Disposition
> > > > *** Disposition type=<script>[6]
> > > > *** DIsposition param: <action>[6]=<store>[5]
> > > > is_quoted=0
> > > > DEBUG:cpl-c:get_dest_user: tring to get user
> > from
> > > > new_uri
> > > > DEBUG:cpl-c:get_dest_user: tring to get user
> > from
> > > > R_uri
> > > > DEBUG:cpl-c:get_dest_user: tring to get user
> > from
> > > To
> > > > parse_headers: flags=-1
> > > > DEBUG:cpl:write_to_db:User 123 at test.org
> already
> > in
> > > > CPL
> > > > database -> update
> > > > parse_headers: flags=-1
> > > > check_via_address(66.1.2.3, 127.0.0.1, 0)
> > > >
> > > > --- ser die <serdiehard at yahoo.com> wrote:
> > > >
> > > > > hello richard
> > > > >
> > > > > still it gives the fial cpl registering
> > > > >
> > > > > the total log is
> > > > >
> > > > >
> > > >
> > >
> >
>
********************************************************
> > > > > 6(17988) SIP Request:
> > > > > 6(17988) method: <REGISTER>
> > > > > 6(17988) uri: <sip:xxx.xxx.net:5060>
> > > > > 6(17988) version: <SIP/2.0>
> > > > > 6(17988) parse_headers: flags=1
> > > > > 6(17988) end of header reached, state=5
> > > > > 6(17988) parse_headers: Via found, flags=1
> > > > > 6(17988) parse_headers: this is the first
> via
> > > > > 6(17988) After parse_msg...
> > > > > 6(17988) preparing to run routing
> scripts...
> > > > > 6(17988) DEBUG : is_maxfwd_present:
> searching
> > > for
> > > > > max_forwards header
> > > > > 6(17988) parse_headers: flags=128
> > > > > 6(17988) end of header reached, state=9
> > > > > 6(17988) DEBUG: get_hdr_field: <To> [32];
> > > > > uri=[sip:214103 at xxx.xxx.net]
> > > > > 6(17988) DEBUG: to body
> > > > [<sip:214103 at xxx.xxx.net>]
> > > > > 6(17988) get_hdr_field: cseq <CSeq>: <1>
> > > > <REGISTER>
> > > > > 6(17988) DEBUG: get_hdr_body :
> > content_length=0
> > > > > 6(17988) found end of header
> > > > > 6(17988) DEBUG: is_maxfwd_present:
> > max_forwards
> > > > > header not found!
> > > > > 6(17988) check_via_address(202.*.*.84,
> > > > 202.*.*.84,
> > > > > 0)
> > > > > 6(17988) parse_headers: flags=256
> > > > > 6(17988) find_first_route(): No Route
> headers
> > > > found
> > > > > 6(17988) loose_route(): There is no Route
> HF
> > > > > 6(17988) check_self - checking if host==us:
> > > 17==9
> > > > > &&
> > > > > [xxx.xxx.net] == [127.0.0.1]
> > > > > 6(17988) check_self - checking if port 5060
> > > > matches
> > > > > port 5060
> > > > > 6(17988) check_self - checking if host==us:
> > > > 17==13
> > > > > &&
> > > > > [xxx.xxx.net] == [202.*.*.19]
> > > > > 6(17988) check_self - checking if port 5060
> > > > matches
> > > > > port 5060
> > > > > 6(17988) check_self - checking if host==us:
> > > 17==9
> > > > > &&
> > > > > [xxx.xxx.net] == [127.0.0.1]
> > > > > 6(17988) check_self - checking if port 5060
> > > > matches
> > > > > port 5060
> > > > > 6(17988) check_self - checking if host==us:
> > > > 17==13
> > > > > &&
> > > > > [xxx.xxx.net] == [202.*.*.19]
> > > > > 6(17988) check_self - checking if port 5060
> > > > matches
> > > > > port 5060
> > > > > 6(17988) parse_headers: flags=4096
> > > > > 6(17988) pre_auth(): Credentials with given
> > > realm
> > > > > not
> > > > > found
> > > > > 6(17988) build_auth_hf():
> 'WWW-Authenticate:
> > > > Digest
> > > > > realm="xxx.xxx.net",
> > > > >
> > nonce="411b3c2eeb0cedfb65da5f5a2fd9dc5a849c920b"
> > > > > '
> > > > > 6(17988) parse_headers: flags=-1
> > > > > 6(17988) check_via_address(202.*.*.84,
> > > > 202.*.*.84,
> > > > > 0)
> > > > > 6(17988) receive_msg: cleaning up
> > > > > 7(17994) SIP Request:
> > > > > 7(17994) method: <REGISTER>
> > > > > 7(17994) uri: <sip:xxx.xxx.net:5060>
> > > > > 7(17994) version: <SIP/2.0>
> > > > > 7(17994) parse_headers: flags=1
> > > > > 7(17994) end of header reached, state=5
> > > > > 7(17994) parse_headers: Via found, flags=1
> > > > > 7(17994) parse_headers: this is the first
> via
> > > > > 7(17994) After parse_msg...
> > > > > 7(17994) preparing to run routing
> scripts...
> > > > > 7(17994) DEBUG : is_maxfwd_present:
> searching
> > > for
> > > > > max_forwards header
> > > > > 7(17994) parse_headers: flags=128
> > > > > 7(17994) end of header reached, state=9
> > > > > 7(17994) DEBUG: get_hdr_field: <To> [32];
> > > > > uri=[sip:215104 at xxx.xxx.net]
> > > > > 7(17994) DEBUG: to body
> > > > [<sip:215104 at xxx.xxx.net>]
> > > > > 7(17994) get_hdr_field: cseq <CSeq>: <2>
> > > > <REGISTER>
> > > > > 7(17994) DEBUG: get_hdr_body :
> > content_length=0
> > > > > 7(17994) found end of header
> > > > > 7(17994) DEBUG: is_maxfwd_present:
> > max_forwards
> > > > > header not found!
> > > > > 7(17994) check_via_address(202.*.*.84,
> > > > 202.*.*.84,
> > > > > 0)
> > > > > 7(17994) parse_headers: flags=256
> > > > > 7(17994) find_first_route(): No Route
> headers
>
=== message truncated ===
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
More information about the sr-users
mailing list