[Serusers] PDT module

Tue Aug 10 21:22:19 CEST 2004

Hey Daniel,

Unfortunately, i do not maintain the system at 80.234.135.99.  However, i am not sure there is anything wrong with their system anyway....  as you see, i have attempted to dial from my UA once dialling a full address (in this case 3018 - at - sip.prodec.tv)  which was responded to correctly, and once by dialling 839503018 where 83950 should be translated as sip.prodec.tv using the PDT module. Hence, ser should finally send the invite to 3018 - at - sip.prodec.tv in the same was as if i dialled the full address manually, no? There should be no difference, once that invite request, has left ser (161.30.94.136) in how the remote system handles it. 

As you can see from the syslog:

ACC: transaction answered: method=INVITE, i-uri=sip:839503018 at sip.dev.inmarsat.com, o-uri=sip:3018 at sip.prodec.tv <mailto:o-uri=sip:3018 at sip.prodec.tv> 

ACC: transaction answered: method=INVITE, i-uri=sip:3018 at sip.prodec.tv, o-uri=sip:3018 at sip.prodec.tv <mailto:o-uri=sip:3018 at sip.prodec.tv> , call_id=9C912086-C197-484D-8AD2-E261F1A3234A at 161.30.94.150, from=Dave Bath <sip:admin at sip.dev.inmarsat.com>;tag=2122510239, code=487

for some reason using the pdt module appears to issue a malformed invite request... unless soemthing in ser.cfg is not configured correctly.

Is my logic totally off? I appreciate your words of wisdom very much...

Dave

________________________________

From: Daniel-Constantin Mierla [mailto:daniel at iptel.org]
Sent: Tue 10/08/2004 18:03
To: Dave Bath
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] PDT module

Hello,
I see that the request was forwarded from 161.30.94.136:5060 to
80.234.135.99:5060 and you get back a 100 trying. PDT does its job on
161.30.94.136, as far as I assume, so there should be a problem on the
other site 80.234.135.99, could you check that system too?

Daniel

On 8/10/2004 12:06 PM, Dave Bath wrote:

> Hey Daniel and all,
>
> Many thanks for looking into this. The first ngrep is dialling the
> full address, the second is using the pdt module.
>
> ------------------------- BEGIN dialling full external SIP address
> ---------
>
> U 161.30.94.150:5060 -> 161.30.94.136:5060
>
> INVITE sip:3018 at sip.prodec.tv SIP/2.0..Via: SIP/2.0/UDP
> 161.30.94.150:5060;rport;branch=z9hG4bKBAF99F2231994F0D9A5
>
> 3836019EAC108..From: Dave Bath
> <sip:admin at sip.dev.inmarsat.com>;tag=399847332..To:
> <sip:3018 at sip.prodec.tv>..Conta
>
> ct: <sip:admin at 161.30.94.150:5060>..Call-ID:
> FC2BDDD4-9E47-4C5A-9034-4977FC86290D at 161.30.94.150..CSeq: 35761 INVIT
>
> E..Max-Forwards: 70..Content-Type: application/sdp..User-Agent: X-Lite
> release 1103m..Content-Length: 298....v=0..
>
> o=admin 434214617 434214657 IN IP4 161.30.94.150..s=X-Lite..c=IN IP4
> 161.30.94.150..t=0 0..m=audio 8000 RTP/AVP 0
>
> 8 3 98 97 101..a=rtpmap:0 pcmu/8000..a=rtpmap:8 pcma/8000..a=rtpmap:3
> gsm/8000..a=rtpmap:98 iLBC/8000..a=rtpmap:97
>
> speex/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..
>
> #
>
> U 161.30.94.136:5060 -> 161.30.94.150:5060
>
> SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP
> 161.30.94.150:5060;rport=5060;branch=z9hG4bKB
>
> AF99F2231994F0D9A53836019EAC108..From: Dave Bath
> <sip:admin at sip.dev.inmarsat.com>;tag=399847332..To: <sip:3018 at sip
>
> .prodec.tv>..Call-ID:
> FC2BDDD4-9E47-4C5A-9034-4977FC86290D at 161.30.94.150..CSeq: 35761
> INVITE..Server: Sip EXpress
>
> router (0.8.14 (i386/linux))..Content-Length: 0..Warning: 392
> 161.30.94.136:5060 "Noisy feedback tells: pid=13743
>
> req_src_ip=161.30.94.150 req_src_port=5060
> in_uri=sip:3018 at sip.prodec.tv out_uri=sip:3018 at sip.prodec.tv via_cnt==
>
> 1"....
>
> #
>
> U 161.30.94.136:5060 -> 80.234.135.99:5060
>
> INVITE sip:3018 at sip.prodec.tv SIP/2.0..Record-Route:
> <sip:3018 at 161.30.94.136;ftag=399847332;lr=on>..Via: SIP/2.0/U
>
> DP 161.30.94.136;branch=z9hG4bK51f6.ae27ae87.0..Via: SIP/2.0/UDP
> 161.30.94.150:5060;rport=5060;branch=z9hG4bKBAF99
>
> F2231994F0D9A53836019EAC108..From: Dave Bath
> <sip:admin at sip.dev.inmarsat.com>;tag=399847332..To: <sip:3018 at sip.pro
>
> dec.tv>..Contact: <sip:admin at 161.30.94.150:5060>..Call-ID:
> FC2BDDD4-9E47-4C5A-9034-4977FC86290D at 161.30.94.150..CSe
>
> q: 35761 INVITE..Max-Forwards: 69..Content-Type:
> application/sdp..User-Agent: X-Lite release 1103m..Content-Length
>
> : 298....v=0..o=admin 434214617 434214657 IN IP4
> 161.30.94.150..s=X-Lite..c=IN IP4 161.30.94.150..t=0 0..m=audio 8
>
> 000 RTP/AVP 0 8 3 98 97 101..a=rtpmap:0 pcmu/8000..a=rtpmap:8
> pcma/8000..a=rtpmap:3 gsm/8000..a=rtpmap:98 iLBC/800
>
> 0..a=rtpmap:97 speex/8000..a=rtpmap:101
> telephone-event/8000..a=fmtp:101 0-15..
>
> #
>
> U 161.30.94.136:5060 -> 80.234.135.99:5060
>
> INVITE sip:3018 at sip.prodec.tv SIP/2.0..Record-Route:
> <sip:3018 at 161.30.94.136;ftag=399847332;lr=on>..Via: SIP/2.0/U
>
> DP 161.30.94.136;branch=z9hG4bK51f6.ae27ae87.0..Via: SIP/2.0/UDP
> 161.30.94.150:5060;rport=5060;branch=z9hG4bKBAF99
>
> F2231994F0D9A53836019EAC108..From: Dave Bath
> <sip:admin at sip.dev.inmarsat.com>;tag=399847332..To: <sip:3018 at sip.pro
>
> dec.tv>..Contact: <sip:admin at 161.30.94.150:5060>..Call-ID:
> FC2BDDD4-9E47-4C5A-9034-4977FC86290D at 161.30.94.150..CSe
>
> q: 35761 INVITE..Max-Forwards: 69..Content-Type:
> application/sdp..User-Agent: X-Lite release 1103m..Content-Length
>
> : 298....v=0..o=admin 434214617 434214657 IN IP4
> 161.30.94.150..s=X-Lite..c=IN IP4 161.30.94.150..t=0 0..m=audio 8
>
> 000 RTP/AVP 0 8 3 98 97 101..a=rtpmap:0 pcmu/8000..a=rtpmap:8
> pcma/8000..a=rtpmap:3 gsm/8000..a=rtpmap:98 iLBC/800
>
> 0..a=rtpmap:97 speex/8000..a=rtpmap:101
> telephone-event/8000..a=fmtp:101 0-15..
>
> #
>
> U 80.234.135.99:5060 -> 161.30.94.136:5060
>
> SIP/2.0 100 Trying..Via: SIP/2.0/UDP
> 161.30.94.136;branch=z9hG4bK51f6.ae27ae87.0..Via: SIP/2.0/UDP
> 161.30.94.150:5
>
> 060;rport=5060;branch=z9hG4bKBAF99F2231994F0D9A53836019EAC108..From:
> "Dave Bath" <sip:admin at sip.dev.inmarsat.com>;
>
> tag=399847332..To: <sip:3018 at sip.prodec.tv>..Call-ID:
> FC2BDDD4-9E47-4C5A-9034-4977FC86290D at 161.30.94.150..CSeq: 35
>
> 761 INVITE..Content-Length: 0....
>
> #
>
> U 80.234.135.99:5060 -> 161.30.94.136:5060
>
> SIP/2.0 180 Ringing..Via: SIP/2.0/UDP
> 161.30.94.136;branch=z9hG4bK51f6.ae27ae87.0..Via: SIP/2.0/UDP
> 161.30.94.150:
>
> 5060;rport=5060;branch=z9hG4bKBAF99F2231994F0D9A53836019EAC108..Record-Route:
> <sip:sip.prodec.tv:5060;maddr=80.234
>
> .135.99>..Record-Route:
> <sip:3018 at 161.30.94.136;ftag=399847332;lr=on>..From: "Dave Bath"
> <sip:admin at sip.dev.inmars
>
> at.com>;tag=399847332..To:
> <sip:3018 at sip.prodec.tv>;tag=q5elumfa3r..Call-ID:
> FC2BDDD4-9E47-4C5A-9034-4977FC86290D@
>
> 161.30.94.150..CSeq: 35761 INVITE..Contact:
> <sip:3018 at sip.prodec.tv;gruu=do1iiw55>..Allow: INVITE, ACK, CANCEL, BY
>
> E, REFER, OPTIONS, NOTIFY, SUBSCRIBE, PRACK, MESSAGE,
> INFO..Content-Length: 0....
>
> -------------------- END dialling full sip address ----------------
>
> -------------------- BEGIN dialling pdt code ----------------------
>
> #
>
> U 161.30.94.150:5060 -> 161.30.94.136:5060
>
> INVITE sip:839503018 at sip.dev.inmarsat.com SIP/2.0..Via: SIP/2.0/UDP
> 161.30.94.150:5060;rport;branch=z9hG4bK4702083
>
> ECD1D437DA04923E23027A6A5..From: Dave Bath
> <sip:admin at sip.dev.inmarsat.com>;tag=570031081..To: <sip:839503018 at sip.
>
> dev.inmarsat.com>..Contact: <sip:admin at 161.30.94.150:5060>..Call-ID:
> EE63DA9A-C436-4598-B636-F3C8368E711E at 161.30.9
>
> 4.150..CSeq: 64028 INVITE..Max-Forwards: 70..Content-Type:
> application/sdp..User-Agent: X-Lite release 1103m..Cont
>
> ent-Length: 298....v=0..o=admin 434296285 434296325 IN IP4
> 161.30.94.150..s=X-Lite..c=IN IP4 161.30.94.150..t=0 0.
>
> .m=audio 8000 RTP/AVP 0 8 3 98 97 101..a=rtpmap:0
> pcmu/8000..a=rtpmap:8 pcma/8000..a=rtpmap:3 gsm/8000..a=rtpmap:9
>
> 8 iLBC/8000..a=rtpmap:97 speex/8000..a=rtpmap:101
> telephone-event/8000..a=fmtp:101 0-15..
>
> #
>
> U 161.30.94.136:5060 -> 161.30.94.150:5060
>
> SIP/2.0 100 trying -- your call is important to us..Via: SIP/2.0/UDP
> 161.30.94.150:5060;rport=5060;branch=z9hG4bK4
>
> 702083ECD1D437DA04923E23027A6A5..From: Dave Bath
> <sip:admin at sip.dev.inmarsat.com>;tag=570031081..To: <sip:83950301
>
> 8 at sip.dev.inmarsat.com>..Call-ID:
> EE63DA9A-C436-4598-B636-F3C8368E711E at 161.30.94.150..CSeq: 64028
> INVITE..Server:
>
> Sip EXpress router (0.8.14 (i386/linux))..Content-Length: 0..Warning:
> 392 161.30.94.136:5060 "Noisy feedback tells
>
> : pid=13743 req_src_ip=161.30.94.150 req_src_port=5060
> in_uri=sip:839503018 at sip.dev.inmarsat.com out_uri=sip:3018
>
> @sip.prodec.tv. via_cnt==1"....
>
> #
>
> U 161.30.94.136:5060 -> 80.234.135.99:5060
>
> INVITE sip:3018 at sip.prodec.tv. SIP/2.0..Record-Route:
> <sip:839503018 at 161.30.94.136;ftag=570031081;lr=on>..Via: SIP
>
> /2.0/UDP 161.30.94.136;branch=z9hG4bK705d.1d3e9f23.0..Via: SIP/2.0/UDP
> 161.30.94.150:5060;rport=5060;branch=z9hG4b
>
> K4702083ECD1D437DA04923E23027A6A5..From: Dave Bath
> <sip:admin at sip.dev.inmarsat.com>;tag=570031081..To: <sip:839503
>
> 018 at sip.dev.inmarsat.com>..Contact:
> <sip:admin at 161.30.94.150:5060>..Call-ID:
> EE63DA9A-C436-4598-B636-F3C8368E711E@
>
> 161.30.94.150..CSeq: 64028 INVITE..Max-Forwards: 69..Content-Type:
> application/sdp..User-Agent: X-Lite release 110
>
> 3m..Content-Length: 298....v=0..o=admin 434296285 434296325 IN IP4
> 161.30.94.150..s=X-Lite..c=IN IP4 161.30.94.150
>
> ..t=0 0..m=audio 8000 RTP/AVP 0 8 3 98 97 101..a=rtpmap:0
> pcmu/8000..a=rtpmap:8 pcma/8000..a=rtpmap:3 gsm/8000..a=
>
> rtpmap:98 iLBC/8000..a=rtpmap:97 speex/8000..a=rtpmap:101
> telephone-event/8000..a=fmtp:101 0-15..
>
> #
>
> U 80.234.135.99:5060 -> 161.30.94.136:5060
>
> SIP/2.0 100 Trying..Via: SIP/2.0/UDP
> 161.30.94.136;branch=z9hG4bK705d.1d3e9f23.0..Via: SIP/2.0/UDP
> 161.30.94.150:5
>
> 060;rport=5060;branch=z9hG4bK4702083ECD1D437DA04923E23027A6A5..From:
> "Dave Bath" <sip:admin at sip.dev.inmarsat.com>;
>
> tag=570031081..To: <sip:839503018 at sip.dev.inmarsat.com>..Call-ID:
> EE63DA9A-C436-4598-B636-F3C8368E711E at 161.30.94.1
>
> 50..CSeq: 64028 INVITE..Content-Length: 0....
>
> #
>
> ------- END dialling with pdt module ---------------------------
>
> In the second case, there is nothing futher transmitted until a
> request timed out is received.
>
> Many thanks for looking into this...
>
> Dave
>
> -----Original Message-----
> From: Daniel-Constantin Mierla [mailto:daniel at iptel.org]
> Sent: 10 August 2004 10:10
> To: Dave Bath
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] PDT module
>
> we need network traffic dumps (ngrep, ethereal) to see what happens there.
>
> Daniel
>
> On 8/9/2004 4:23 PM, Dave Bath wrote:
>
>>
>
>>
>
>>I have been trying to use the pdt module, and the idea seems
> excellent. I have the database up and running, and can enter codes.
> Things seem to be translated correctly, but the INVITE request is not
> complete, and the call always fails. Compare the following from the
> log file:
>
>>
>
>>
>
>>
>
>>ACC: transaction answered: method=INVITE,
> i-uri=sip:839503018 at sip.dev.inmarsat.com, o-uri=sip:3018 at sip.prodec.tv
>
>>
>
>>
>
>>
>
>>ACC: transaction answered: method=INVITE,
> i-uri=sip:3018 at sip.prodec.tv, o-uri=sip:3018 at sip.prodec.tv,
> call_id=9C912086-C197-484D-8AD2-E261F1A3234A at 161.30.94.150, from=Dave
> Bath <sip:admin at sip.dev.inmarsat.com>;tag=2122510239, code=487
>
>>
>
>>
>
>>
>
>>The first is dialing using the pdt module, with my code
> 8+395+0+<number> the second is directly dialing the full external
> domain address. The first fails, and I eventually get a timeout, the
> second connects no problem.
>
>>
>
>>
>
>>
>
>>Excerpts from the ser.cfg are:
>
>>
>
>>
>
>>
>
>> # loose-route processing
>
>>
>
>> if (loose_route()) {
>
>>
>
>> t_relay();
>
>>
>
>> break;
>
>>
>
>> };
>
>>
>
>>
>
>>
>
>> # we record-route all messages -- to make sure that
>
>>
>
>> # subsequent messages will go through our proxy; that's
>
>>
>
>> # particularly good if upstream and downstream entities
>
>>
>
>> # use different transport protocol
>
>>
>
>> record_route();
>
>>
>
>>
>
>>
>
>> # label all transaction for accounting
>
>>
>
>> setflag(1);
>
>>
>
>>
>
>>
>
>> # Make sure we check the prefix tables
>
>>
>
>> prefix2domain();
>
>>
>
>>
>
>>
>
>>before the if (uri==myself) statement.
>
>>
>
>>
>
>>
>
>>I have been bashing my head around and around for so long now, do you
> have any ideas?!
>
>>
>
>>
>
>>
>
>>Many many thanks in advance,
>
>>
>
>>
>
>>
>
>>Dave
>
>>
>
>>
>
>>
>
>> /-------------------------------------/
>
>>
>
>> /Dave Bath/
>
>>
>
>> /Inmarsat LTD/
>
>>
>
>> /Global Satellite Communications/
>
>>
>
>> /www.inmarsat.com <http://www.inmarsat.com/> /
>
>>
>
>> /Regional BGAN Engineer/
>
>>
>
>> /07736 232085/
>
>>
>
>> NOTE: The information contained in this email is intended for the
>
>> named recipients only, it may be privileged and confidential. If you
>
>> are not the intended recipient, you must not copy distribute or take
>
>> any action in reliance upon it. No warranties or assurances are made
>
>> in relation to the safety and content of this email and any
>
>> attachments. No liability is accepted for any consequences arising
> from it
>
>>
>
>>
>
>>
>
>>------------------------------------------------------------------------
>
>>
>
>>_______________________________________________
>
>>Serusers mailing list
>
>>serusers at lists.iptel.org
>
>>http://lists.iptel.org/mailman/listinfo/serusers
>
>>
>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040810/5a8d053c/attachment.htm>