[Serusers] Gransteam 486, auth digest on ser.

[Greg Fausak]

It might be the grandstream firmware?
I had a problem with the newest firmware. I
went to a version back and that worked OK.

Grandstream said it was something about SER
splitting up the packet?  SOme sort of udp fragmentation
problem?  I never really tried to get the the bottom
of it, but your problem sounds similar.

I can get the firmware version off my Grandstream if
you need it.  I believe it is 1.4.something, and the
version I had problems with was 1.5.something.

-g

On Aug 9, 2004, at 9:11 AM, Sean Lowry wrote:

> i have ser running with db auth.
>
> i have 3 users.
>
> 1-asterisk
> 1-x-lite client
> 1-grandstream 486.
>
> now the asterisk and x-lite client register with no problems.
>
> but the grandsteam 486 fails everytime.
>
> here's the error from the grandstream
>
> 14(15417) receive_msg: cleaning up
>  9(15406) SIP Request:
>  9(15406)  method:  <REGISTER>
>  9(15406)  uri:     <sip:*.*.*.*>
>  9(15406)  version: <SIP/2.0>
>  9(15406) parse_headers: flags=1
>  9(15406) Found param type 232, <branch> = <z9hG4bK2dfa9e7d29a2dac4>;
> state=16
>  9(15406) end of header reached, state=5
>  9(15406) parse_headers: Via found, flags=1
>  9(15406) parse_headers: this is the first via
>  9(15406) After parse_msg...
>  9(15406) preparing to run routing scripts...
>  9(15406) DEBUG : is_maxfwd_present: searching for max_forwards header
>  9(15406) parse_headers: flags=128
>  9(15406) end of header reached, state=9
>  9(15406) DEBUG: get_hdr_field: <To> [26]; uri=[sip:60005@*.*.*.*]
>  9(15406) DEBUG: to body [<sip:60005@*.*.*.*>
> ]
>  9(15406) get_hdr_field: cseq <CSeq>: <100> <REGISTER>
>  9(15406) DEBUG: is_maxfwd_present: value = 70
>  9(15406) DEBUG: add_param: tag=bc875e4c67b6e1a6
>  9(15406) end of header reached, state=29
>  9(15406) parse_headers: flags=256
>  9(15406) DEBUG: get_hdr_body : content_length=0
>  9(15406) found end of header
>  9(15406) find_first_route(): No Route headers found
>  9(15406) loose_route(): There is no Route HF
>  9(15406) check_self - checking if host==us: 12==9 &&  [*.*.*.*] ==
> [127.0.0.1]
>  9(15406) check_self - checking if port 5060 matches port 5060
>  9(15406) check_self - checking if host==us: 12==12 &&  [*.*.*.*] ==
> [*.*.*.*]
>  9(15406) check_self - checking if port 5060 matches port 5060
>  9(15406) parse_headers: flags=4096
>  9(15406) pre_auth(): Credentials with given realm not found
>  9(15406) build_auth_hf(): 'WWW-Authenticate: Digest 
> realm="mydomain.com",
> nonce="411790fae9ff2d7739f5e19e3f8b5b675e82c1b7"
> '
>  9(15406) parse_headers: flags=-1
>  9(15406) check_via_address(*.*.*.*, *.*.*.*, 0)
>  9(15406) DEBUG:destroy_avp_list: destroing list (nil)
>  9(15406) receive_msg: cleaning up
>
>
> does anyone have any ideas ?
>
> Sean
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
Greg Fausak
www.AddaBrand.com
(US) 469-546-1265