[Serusers] Click to Dial

[Daniel-Constantin Mierla]

Looks like your SIP UA does not support REFER. Check the technical 
details of the SIP UA or ask the vendor about.

Daniel


On 8/4/2004 7:29 AM, Andrew Mee wrote:

> I have been using ctd.sh with no success.
> SER ver 0.8.14
> > ./ctd.sh sip:support at 192.168.2.253 test3 at 192.168.2.253
> 488 Not Acceptable Here
> invitation failed
>
> my config is :
> # ----------- global configuration parameters ------------------------
>
> debug=7
> listen=192.168.2.253
> log_stderror=yes
> check_via=no   dns=no          rev_dns=no    fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> loadmodule "/usr/lib/ser/modules/mysql.so"
> loadmodule "/usr/lib/ser/modules/exec.so"
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
> loadmodule "/usr/lib/ser/modules/textops.so"
> loadmodule "/usr/lib/ser/modules/auth.so"
> loadmodule "/usr/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> modparam("usrloc", "db_mode",   0)
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "db_url", "sql://xxxx:xxxxx@127.0.0.1/hsver3")
> modparam("auth_db", "user_column", "uname")
> modparam("auth_db", "domain_column", "domain")
> modparam("auth_db", "password_column", "pass")
> modparam("rr", "enable_full_lr", 1)
>
> # -------------------------  request routing logic -------------------
>
> # main routing logic
>
> route{
>
>    # initial sanity checks -- messages with
>    # max_forwards==0, or excessively long requests
>    if (!mf_process_maxfwd_header("10")) {
>        sl_send_reply("483","Too Many Hops");
>        break;
>    };
>    if (msg:len > 8092) {
>        sl_send_reply("513", "Message too big");
>        break;
>    };
>
>    if (loose_route()) {
>        t_relay();
>        break;
>    };
>
>      if (uri==myself) {
>
>        if (method=="REGISTER") {
>
>        # Uncomment this if you want to use digest authentication
>            if (!proxy_authorize("", "users")) {
>                proxy_challenge("", "0");
>                break;
>            };
>            save("location");
>            break;
>        }
>
>        # native SIP destinations are handled using our USRLOC DB
>        if (!lookup("location")) {
>            sl_send_reply("404", "Not Found");
>            break;
>        };
>    };
>    if (!t_relay()) {
>        sl_reply_error();
>    };
>
> }
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>  
>