[Serusers] How to drop 183 msg

[ks lf]

Thank you Jamie for the great tip! It did work very well :-) The sip gateway dropped the first 183 for unknown Call-ID. sip gateway didn't send BYE msg back after second 183 msg, call was successfully connected.

SER is really powerful enough that can almost do everything you imagined ^_^

Regards,

----- Original Message -----
From: Jamie Yukes <jyukes at gmail.com>
Date: Tue, 3 Aug 2004 09:00:42 -0400
To: ksabc at lycos.com, serusers at lists.iptel.org
Subject: Re: [Serusers] How to drop 183 msg

> As a total kludge, you may try changing the packet sufficiently such
> that the sip phone will drop it itself...
> 
> replace_all( "Call-ID: .*@", "Call-ID: XXX@" );
> 
> 
> On Tue, 03 Aug 2004 14:46:15 +0200, Bogdan-Andrei IANCU
> <iancu at fokus.fraunhofer.de> wrote:
> > It is not possible to drop a reply from reply_route - you can change the
> > reply, but not to drop it entirely.
> > bogdan
> > 
> > 
> > 
> > ks lf wrote:
> > 
> > >SIP termination Gateway send two 183 "Session in Progress" msg back to SER, first one without SDP, second one with SDP ( for remote ring back tone purpose ), but this crashed the caller party sip phone somehow, how can we drop the first 183 msg in SER.CFG? We just need forward the second 183 msg to caller party, but don't forwarding the first one, how to porgram onreply_route part? just use break sentense doesn't help. Thanks your great help.
> > >
> > >Regards,
> > >
> > >
> > >
> > >
> > 
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> > 
> 
> Jamie Yukes
> Global Connect http://www.gc1.com/

-- 
_______________________________________________
Find what you are looking for with the Lycos Yellow Pages
http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default.asp?SRC=lycos10