[Serusers] SER+SERWEB help!!!!
Atle Samuelsen
clona at camaro.no
Sat Apr 24 20:47:00 CEST 2004
I agree with Nils, I think the only time you resend a e-mail is IF you
dont get a reply from the server with it in.
For my own sake, I've been out all day,, working with the car.
- Atle
* Nils Ohlmeier <nils at iptel.org> [040424 20:42]:
> I think resending your request multiple times will not improve the response
> time, quality or anything. Especially during the weekend you should not
> expect replies within hours!
>
> Regards
> Nils
>
> On Saturday 24 April 2004 19:25, gaillac harry wrote:
> > Hi all,
> >
> > Here is my ser.cg file. I try to configure send IM, Missed calls,
> > Voicemail.
> > I just can configure Send IM.
> > Now I can call isdngw, ivr
> > I need help to configure lookup location logic for missed calls and
> > voicemail (offline users)
> >
> > Anybody could help me to configure the others functions (problem with
> > logic !!).
> >
> > harry
> > Regards
> >
> > #
> > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> > #
> > # simple quick-start config script
> > #
> > #
> > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> > #
> > # simple quick-start config script
> > #
> >
> > # -- global configuration parameters --
> >
> > #debug=3 # debug level (cmd line: -dddddddddd)
> > #fork=yes
> > #log_stderror=no # (cmd line: -E)
> >
> > /* Uncomment these lines to enter debugging mode
> > debug=7
> > fork=no
> > log_stderror=yes
> > */
> >
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > listen=192.168.0.1
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> > fifo_mode=0666
> > # -- module loading --
> >
> > # Uncomment this if you want to use SQL database
> > loadmodule "/usr/lib/ser/modules/mysql.so"
> >
> > loadmodule "/usr/lib/ser/modules/sl.so"
> > loadmodule "/usr/lib/ser/modules/tm.so"
> > loadmodule "/usr/lib/ser/modules/rr.so"
> > loadmodule "/usr/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/lib/ser/modules/registrar.so"
> > loadmodule "/usr/lib/ser/modules/domain.so"
> > loadmodule "/usr/lib/ser/modules/msilo.so"
> > loadmodule "/usr/lib/ser/modules/acc.so"
> > loadmodule "/usr/lib/ser/modules/vm.so"
> > loadmodule "/usr/lib/ser/modules/uri.so"
> >
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> > loadmodule "/usr/lib/ser/modules/auth.so"
> > loadmodule "/usr/lib/ser/modules/auth_db.so"
> >
> > # -- setting module-specific parameters --
> > # -- usrloc params --
> >
> > #modparam("usrloc", "db_mode", 0)
> >
> > # Uncomment this if you want to use SQL database
> > # for persistent storage and comment the previous line
> > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("usrloc", "db_mode", 2)
> > modparam("usrloc", "use_domain", 1)
> >
> > # -- auth params --
> > # Uncomment if you are using auth module
> > #
> > modparam("auth_db", "calculate_ha1", yes)
> > #
> > # If you set "calculate_ha1" parameter to yes (which true in this
> > config),
> > # uncomment also the following parameter)
> > #
> > modparam("auth_db", "password_column", "password")
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> > modparam("rr", "enable_full_lr", 1)
> >
> > # --registrar params--
> > modparam("registrar", "use_domain", 1)
> >
> > # --domain params--
> > modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("domain", "db_mode", 1) # Use chaching
> >
> > # --acc params--
> > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("acc", "db_missed_flag", 3)
> >
> > # --msilo params--
> > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("msilo", "db_table", "silo")
> > modparam("msilo","registrar","sip:registrar at 192.168.0.1")
> >
> > # --uri params--
> > modparam("uri", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("uri", "subscriber_table", "subscriber")
> >
> >
> > # --vm params--
> > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")
> >
> > # -- request routing logic --
> >
> > # main routing logic
> >
> > route{
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> > if ( msg:len > max_len ) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # we record-route all messages -- to make sure that
> > # subsequent messages will go through our proxy; that's
> > # particularly good if upstream and downstream entities
> > # use different transport protocol
> > record_route();
> > # loose-route processing
> > if (loose_route()) {
> > t_relay();
> > break;
> > };
> >
> > # isdn gateway
> > if(method=="INVITE" || method=="BYE" || method=="CANCEL"){
> > if (uri=~"sip:[0-9]{10}@.*") {
> > route(2);
> > break;
> > };
> > };
> >
> > # ivr conf
> > if(method=="INVITE" || method=="BYE" || method=="CANCEL"){
> > if (uri=~"sip:5000 at .*") {
> > route(4);
> > break;
> > };
> > };
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> > if (is_from_local()) {
> >
> > if (method=="REGISTER") {
> >
> > # Uncomment this if you want to use digest authentication
> > if (!www_authorize("", "subscriber")) {
> > www_challenge("", "0");
> > break;
> > };
> >
> > save("location");
> > # MSILO - dumping user's offline messages
> > if (m_dump())
> > {
> > log("MSILO: offline messages dumped - if
> > they were\n");
> > }else{
> > log("MSILO: no offline messages
> > dumped\n");
> > };
> > break;
> > };
> >
> > # native SIP destinations are handled using our USRLOC
> > DB
> > lookup("aliases");
> > if (!lookup("location")) {
> >
> > if (! t_newtran()) {
> > sl_reply_error();
> > break;
> > };
> > # we do not care about anything else but
> > MESSAGEs
> > if (!method=="MESSAGE") {
> > if (!t_reply("404", "Not found")) {
> > sl_reply_error();
> > };
> > break;
> > };
> > log("MESSAGE received -> storing using
> > MSILO\n");
> > # MSILO - storing as offline message
> > if (m_store("0")) {
> > log("MSILO: offline message stored\n");
> > if (!t_reply("202", "Accepted")) {
> > sl_reply_error();
> > };
> > }else{
> > log("MSILO: offline message NOT
> > stored\n");
> > if (!t_reply("503", "Service
> > Unavailable")) {
> > sl_reply_error();
> > };
> > };
> > break;
> > };
> > # if the downstream UA does not support MESSAGE
> > requests
> > # go to failure_route[1]
> > t_on_failure("1");
> > t_relay();
> > break;
> > };
> > # forward to current uri now; use stateful forwarding;
> > that
> > # works reliably even if we forward from TCP to UDP
> > if (!t_relay()) {
> > sl_reply_error();
> > };
> >
> > }
> >
> >
> > failure_route[1] {
> > # forwarding failed -- check if the request was a MESSAGE
> > if (!method=="MESSAGE")
> > {
> > break;
> > };
> >
> > log(1,"MSILO: the downstream UA does not support MESSAGE
> > requests ...\n");
> > # we have changed the R-URI with the contact address -- ignore
> > it now
> > if (m_store("1"))
> > {
> > log("MSILO: offline message stored\n");
> > t_reply("202", "Accepted for delivery");
> > }else{
> > log("MSILO: offline message NOT stored\n");
> > t_reply("503", "Service Unavailable");
> > };
> > }
> >
> > route[2] {
> > # ############################## #
> > # isdngw specific configuration #
> > # ############################## #
> > if(t_newtran()){
> >
> > if(method=="INVITE" || method=="BYE" ||
> > method=="CANCEL"){
> >
> > # send a response right at the start to
> > avoid retransmissions
> > t_reply("100","Trying -- just wait a
> > minute !");
> >
> > # isdngw only gets activated on invite
> > requests
> > if(method=="INVITE"){
> >
> > # filename is defined in
> > sems.conf.
> > if(uri=~"sip:[0-9]{10}@.*"){
> >
> > if(!vm("/tmp/am_fifo","isdngw")){ log("could not contact isdngw\n");
> >
> > t_reply("500","could not contact isdngw"); };
> > # Allow the announcement module
> > of sems to be used as well.
> > # This can be useful for testing
> > the isdngw.
> > } else
> > if(uri=~"sip:announcement at .*"){
> >
> > if(!vm("/tmp/am_fifo","announcement")){ log("could not contact
> > announcement\n");
> >
> > t_reply("500","could not contact announcement"); };
> > # we dont feel responsible for
> > sip addresses of any other kind,
> > # so send the right error code.
> > } else {
> > t_reply("404","Not
> > Found");
> > };
> > # stop routing here, the message
> > is now processed by the media server
> > break;
> > };
> >
> > # The following handles the call
> > termination, we must pass these requests
> > # to the media server as follows. Again
> > make shure the fifo name and permissions
> > # are set correctly (like im sems.conf).
> > if((method=="BYE")||(method=="CANCEL")){
> >
> > if(!vm("/tmp/am_fifo","bye")){ log("could not contact the media server\n");
> >
> > t_reply("500","could not contact the media server"); };
> > break;
> > };
> > # other methods than INVITE, BYE and CANCEL are
> > not handled by this SIP Server
> > # so we sent an error message
> > } else {
> > log("ERROR: method not supported\n");
> > t_reply("500", "sorry, method not
> > supported");
> > };
> > } else {
> > # for any reason the transaction could not be created,
> > send error code
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new transaction");
> > };
> > # in isdngw.conf. Don't change this setting.
> > t_relay();
> > # end of routing.
> > }
> >
> > route[3] {
> > # Voicemail specific configuration - begin
> >
> > if(method=="ACK" || method=="INVITE" || method=="BYE"){
> >
> > if (!t_newtran()) {
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new
> > transaction");
> > break;
> > };
> >
> > t_reply("100","Trying -- just wait a minute !");
> > if(method=="INVITE"){
> > log("**************** vm start - begin
> > ******************\n");
> > if (uri=~"sip:*@example.com" ||
> > uri=~"sip:*@support.example.com") {
> > if (!vm("/tmp/am_fifo", "announcement"))
> > {
> > log("couldn't contact
> > announcement server\n");
> > t_reply("500", "couldn not
> > contact announcement server");
> > };
> > } else {
> > if(!vm("/tmp/am_fifo","voicemail")){
> > log("could not contact the
> > answer machine\n");
> > t_reply("500","could not contact
> > the answer machine");
> > };
> > };
> > log("**************** vm start - end
> > ******************\n");
> > } else if(method=="BYE"){
> > log("**************** vm end - begin
> > ******************\n");
> > if(!vm("/tmp/am_fifo","bye")){
> > log("could not contact the answer
> > machine\n");
> > t_reply("500","could not contact the
> > answer machine");
> > };
> > log("**************** vm end - end
> > ******************\n");
> > };
> > break;
> > };
> > if (method=="CANCEL") {
> > sl_send_reply("200", "cancels are junked here");
> > break;
> > };
> > sl_send_reply("501", "method not understood here");
> > }
> >
> > route[4] {
> > # ivr specific configuration - begin
> >
> > if(method=="ACK" || method=="INVITE" || method=="BYE"){
> >
> > if (!t_newtran()) {
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new
> > transaction");
> > break;
> > };
> >
> > t_reply("100","Trying -- just wait a minute !");
> > if(method=="INVITE"){
> > log("**************** vm start - begin
> > ******************\n");
> > if (uri=~"sip:5000 at .*") {
> > if (!vm("/tmp/am_fifo", "ivr")) {
> > log("couldn't contact ivr server\n");
> > t_reply("500", "couldn not
> > contact ivr server");
> > };
> > };
> > log("**************** vm start - end
> > ******************\n");
> > } else if(method=="BYE"){
> > log("**************** vm end - begin
> > ******************\n");
> > if(!vm("/tmp/am_fifo","bye")){
> > log("could not contact ivr\n");
> > t_reply("500","could not contact ivr");
> > };
> > log("**************** vm end - end
> > ******************\n");
> > };
> > break;
> > };
> > if (method=="CANCEL") {
> > sl_send_reply("200", "cancels are junked here");
> > break;
> > };
> > sl_send_reply("501", "method not understood here");
> > }
> >
> >
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
More information about the sr-users
mailing list