[Serusers] SER+SERWEB

gaillac harry gaillacharry at yahoo.fr
Sat Apr 24 16:03:56 CEST 2004


Hi all,

Here is my ser.cg file. I try to configure send IM, Missed calls,
Voicemail.
I just can configure Send IM.

Anybody could help me to configure the others functions (problem with
logic !!).

harry
Regards

#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no	# (cmd line: -E)

/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
listen=192.168.0.1
port=5060
children=4
fifo="/tmp/ser_fifo"
fifo_mode=0666
# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"
loadmodule "/usr/lib/ser/modules/domain.so"
loadmodule "/usr/lib/ser/modules/msilo.so"
loadmodule "/usr/lib/ser/modules/acc.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------
# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", 1)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this
config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# --registrar params--
modparam("registrar", "use_domain", 1)

# --domain params--
modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("domain", "db_mode", 1)   # Use chaching

# --acc params--
#modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
#modparam("acc", "db_missed_flag", 3)

# --msilo params--
modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")
modparam("msilo", "db_table", "silo")
modparam("msilo","registrar","sip:registrar at 192.168.0.1")

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if ( msg:len > max_len ) {
		sl_send_reply("513", "Message too big");
		break;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	record_route();	
	# loose-route processing
	if (loose_route()) {
		t_relay();
		break;
	};
	setflag(3);
	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (is_from_local()) {

		if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
			if (!www_authorize("", "subscriber")) {
				www_challenge("", "0");
				break;
			};

			save("location");
			# MSILO - dumping user's offline messages
			if (m_dump()) {
				log("MSILO: offline messages dumped - if they were\n");
			}else{
				log("MSILO: no offline messages dumped\n");
			};
			break;
		};

		# native SIP destinations are handled using our USRLOC DB
		lookup("aliases");
		if (!lookup("location")) {
			if (! t_newtran()) {
				sl_reply_error();
				break;
   			};
			# we do not care about anything else but MESSAGEs
    		if (!(method=="MESSAGE")) {
				if (!t_reply("404", "Not found")) {
					sl_reply_error();
				};
    				break;
			};
			log("MESSAGE received -> storing using MSILO\n");
			# MSILO - storing as offline message
			if (m_store("0")) {
				log("MSILO: offline message stored\n");
				if (!t_reply("202", "Accepted")) {
					sl_reply_error();
				};
			}else{
				log("MSILO: offline message NOT stored\n");
				if (!t_reply("503", "Service Unavailable")) {
					sl_reply_error();
				};
			};
			break;
		};
		# if the downstream UA does not support MESSAGE requests
		# go to failure_route[1]
		t_on_failure("1");
		t_relay();
		break;
	};

    	if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) {
	  	route(2);
		t_relay();
		break;
	};

	# forward to current uri now; use stateful forwarding; that
	# works reliably even if we forward from TCP to UDP
	if (!t_relay()) {
		sl_reply_error();
	};

}


failure_route[1] {
	# forwarding failed -- check if the request was a MESSAGE 
	if (!method=="MESSAGE")
	{
    	break;
	};
	
	log(1,"MSILO: the downstream UA does not support MESSAGE requests
...\n");
	# we have changed the R-URI with the contact address -- ignore it now
	if (m_store("1")) {
		log("MSILO: offline message stored\n");
		t_reply("202", "Accepted for delivery"); 
	}else{
		log("MSILO: offline message NOT stored\n");
		t_reply("503", "Service Unavailable");
	};
}

route[2] {
    # non-Voip -- just send "off-line"
    if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) {
        sl_send_reply("404", "Not Found");
        break;
    };
    if (t_newtran()) {
            t_reply("404", "Not Found");
            acc_db_request("404 missed call", "missed_calls");

    };
}





More information about the sr-users mailing list