[Serusers] Re: SERWEB+SER

Atle Samuelsen clona at camaro.no
Fri Apr 23 07:53:33 CEST 2004


I'm not a developer myself.. but google is my friend :)
I think alot of the questions you have adde here is alreaddy answerd
before on the mailing-lists.


-Atle

* gaillac harry <gaillacharry at yahoo.fr> [040423 01:53]:
> hello atle,
> 	
> I waste to much time with SER+SEMS+SERWEB I'm not a delopper, I've tried
> my best to configure SER without a great success.
> I'm about to look at Snom products.
> 
> Many thanks all
> Harry
> 
> 
> Le jeu 22/04/2004 ?? 21:40, Atle Samuelsen a ??crit :
> > www.google.com
> > acc +mysql :host mail.iptel.org
> > 
> > have'nt testet it.. but I know that you are not the first one who has
> > had that problem.
> > 
> > -atle
> > 
> > * gaillac harry <gaillacharry at yahoo.fr> [040422 17:06]:
> > > your're right
> > > "DEFS+=-DSQL_ACC" in the modules/acc/Makefile.
> > > Where Could I find that information?
> > > Regards
> > > 
> > > Le jeu 22/04/2004 ?? 16:45, Atle Samuelsen a ??crit :
> > > > If I dont rember TOO wrong, I think there is a option you have forgot'n
> > > > in the Makefile for the acc.module that says if it uses a database or
> > > > not.
> > > > 
> > > > 
> > > > - Atle
> > > > 
> > > > 
> > > > * gaillac harry <gaillacharry at yahoo.fr> [040422 16:29]:
> > > > > Here is my ser.cfg.SER don't start because of acc module 
> > > > > anybody could help me to solved this problem before an other ?
> > > > > 
> > > > > ser -c =>
> > > > >  0(6238) set_mod_param_regex: parameter <db_url> not found in module
> > > > > <acc>
> > > > >  0(6238) parse error (96,60-61): Can't set module parameter
> > > > >  0(6238) set_mod_param_regex: parameter <db_missed_flag> not found in
> > > > > module <acc>
> > > > >  0(6238) parse error (97,36-37): Can't set module parameter
> > > > >  0(6238) parse error (195,63-64): unknown command, missing loadmodule?
> > > > >  
> > > > > ERROR: bad config file (3 errors)
> > > > > 
> > > > > regards
> > > > > 
> > > > > 
> > > > > #
> > > > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> > > > > #
> > > > > # simple quick-start config script
> > > > > #
> > > > > 
> > > > > # ----------- global configuration parameters ------------------------
> > > > > 
> > > > > #debug=3         # debug level (cmd line: -dddddddddd)
> > > > > #fork=yes
> > > > > #log_stderror=no	# (cmd line: -E)
> > > > > 
> > > > > /* Uncomment these lines to enter debugging mode 
> > > > > debug=9
> > > > > fork=yes
> > > > > log_stderror=yes
> > > > > */
> > > > > 
> > > > > check_via=no	# (cmd. line: -v)
> > > > > dns=no           # (cmd. line: -r)
> > > > > rev_dns=no      # (cmd. line: -R)
> > > > > port=5060
> > > > > listen=192.168.0.1
> > > > > children=4
> > > > > fifo="/tmp/ser_fifo"
> > > > > fifo_mode=0666
> > > > > #alias="example.com"
> > > > > # ------------------ module:wq loading
> > > > > ----------------------------------
> > > > > 
> > > > > # Uncomment this if you want to use SQL database
> > > > > loadmodule "/usr/lib/ser/modules/mysql.so"
> > > > > 
> > > > > loadmodule "/usr/lib/ser/modules/sl.so"
> > > > > loadmodule "/usr/lib/ser/modules/tm.so"
> > > > > loadmodule "/usr/lib/ser/modules/rr.so"
> > > > > loadmodule "/usr/lib/ser/modules/maxfwd.so"
> > > > > loadmodule "/usr/lib/ser/modules/domain.so"
> > > > > loadmodule "/usr/lib/ser/modules/usrloc.so"
> > > > > loadmodule "/usr/lib/ser/modules/registrar.so"
> > > > > loadmodule "/usr/lib/ser/modules/msilo.so"
> > > > > loadmodule "/usr/lib/ser/modules/vm.so"
> > > > > loadmodule "/usr/lib/ser/modules/acc.so"
> > > > > 
> > > > > # Uncomment this if you want digest authentication
> > > > > # mysql.so must be loaded !
> > > > > loadmodule "/usr/lib/ser/modules/auth.so"
> > > > > loadmodule "/usr/lib/ser/modules/auth_db.so"
> > > > > 
> > > > > # ----------------- setting module-specific parameters ---------------
> > > > > 
> > > > > # -- usrloc params --
> > > > > 
> > > > > #modparam("usrloc", "db_mode",   0)
> > > > > 
> > > > > # Uncomment this if you want to use SQL database 
> > > > > # for persistent storage and comment the previous line
> > > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > > > modparam("usrloc", "db_mode", 1)
> > > > > #modparam("usrloc", "use_domain", 1)
> > > > > 
> > > > > # --register params--
> > > > > modparam("registrar", "use_domain", 1)
> > > > > 
> > > > > # -- auth params --
> > > > > # Uncomment if you are using auth module
> > > > > #
> > > > > modparam("auth_db", "calculate_ha1", yes)
> > > > > #
> > > > > # If you set "calculate_ha1" parameter to yes (which true in this
> > > > > config), 
> > > > > # uncomment also the following parameter)
> > > > > #
> > > > > modparam("auth_db", "password_column", "password")
> > > > > 
> > > > > # -- rr params --
> > > > > # add value to ;lr param to make some broken UAs happy
> > > > > modparam("rr", "enable_full_lr", 1)
> > > > > 
> > > > > # --domain module--
> > > > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > > > modparam("domain", "db_mode", 1)
> > > > > modparam("domain", "domain_table", "domain")
> > > > > modparam("domain", "domain_col", "domain")
> > > > > 
> > > > > # --msilo params--
> > > > > modparam("msilo", "registrar", "sip:registrar at example.com")
> > > > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")
> > > > > 
> > > > > # --vm params--
> > > > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")
> > > > > 
> > > > > # --acc params--
> > > > > modparam("acc", "log_level", 1)
> > > > > modparam("acc", "log_flag", 2)
> > > > > modparam("acc", "log_missed_flag", 2)
> > > > > modparam("acc", "log_fmt", "fimos")
> > > > > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > > > modparam("acc", "db_missed_flag", 2)
> > > > > 
> > > > > # -------------------------  request routing logic -------------------
> > > > > 
> > > > > # main routing logic
> > > > > 
> > > > > route{
> > > > > 
> > > > > 	# initial sanity checks -- messages with
> > > > > 	# max_forwards==0, or excessively long requests
> > > > > 	if (!mf_process_maxfwd_header("10")) {
> > > > > 		sl_send_reply("483","Too Many Hops");
> > > > > 		break;
> > > > > 	};
> > > > > 	if ( msg:len > max_len ) {
> > > > > 		sl_send_reply("513", "Message too big");
> > > > > 		break;
> > > > > 	};
> > > > > 
> > > > > 	# we record-route all messages -- to make sure that
> > > > > 	# subsequent messages will go through our proxy; that's
> > > > > 	# particularly good if upstream and downstream entities
> > > > > 	# use different transport protocol
> > > > > 	record_route();	
> > > > > 	# loose-route processing
> > > > > 	if (loose_route()) {
> > > > > 		t_relay();
> > > > > 		break;
> > > > > 	};
> > > > > 
> > > > > 	# if the request is for other domain use UsrLoc
> > > > > 	# (in case, it does not work, use the following command
> > > > > 	# with proper names and addresses in it)
> > > > > 	if (is_from_local()) {
> > > > > 
> > > > > 		if (method=="REGISTER") {
> > > > > 
> > > > > # Uncomment this if you want to use digest authentication
> > > > > 			if (!www_authorize("", "subscriber")) {
> > > > > 				www_challenge("", "0");
> > > > > 				break;
> > > > > 			};
> > > > > 
> > > > > 			save("location");
> > > > > 			m_dump();
> > > > > 			break;
> > > > > 		};
> > > > > 
> > > > > 		# native SIP destinations are handled using our USRLOC DB
> > > > > 		lookup("aliases");
> > > > > 		if (!lookup("location")) {
> > > > > 
> > > > > 		if (method == "MESSAGE") {
> > > > >         		if (!t_newtran()) {
> > > > >             			sl_reply_error();
> > > > >             			break;
> > > > >         			};
> > > > > 
> > > > >         	if (m_store("0")) {
> > > > >             		t_reply("202", "Accepted for Later Delivery");
> > > > >             			break;
> > > > >         			};
> > > > > 
> > > > >       			 t_reply("503", "Service Unavailable");
> > > > >         			break;
> > > > >     				};
> > > > > 			};
> > > > > 
> > > > >      			if ((method=="INVITE" || method=="ACK") && t_newtran() ) {
> > > > >           		t_reply("404", "Not Found");
> > > > > 				route(3);
> > > > > 			  	break;
> > > > >         			};
> > > > > 		
> > > > > 		};
> > > > > 
> > > > > 	setflag(2);
> > > > >         # forward to current uri now; use stateful forwarding; that
> > > > >         # works reliably even if we forward from TCP to UDP
> > > > >         t_on_failure("1");	
> > > > > 	# forward to current uri now; use stateful forwarding; that
> > > > > 	# works reliably even if we forward from TCP to UDP
> > > > > 	if (!t_relay()) {
> > > > > 		sl_reply_error();
> > > > > 	};
> > > > > 
> > > > > }
> > > > > 
> > > > > 
> > > > > route[3] { 
> > > > > 
> > > > > # non-Voip -- just send "off-line"
> > > > >    		 if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) {
> > > > >         		sl_send_reply("404", "Not Found");
> > > > >         		break;
> > > > >     		};
> > > > >     		if (t_newtran()) {
> > > > >          		t_reply("404", "Not Found");
> > > > >             		acc_db_request("404 missed call", "missed_calls");
> > > > > 
> > > > >     		};
> > > > > }
> > > > > 
> > > > > 
> > > > > 
> > > 
> > > 
> 
> 




More information about the sr-users mailing list