[Serusers] SERWEB+SER
Zeus Ng
zeus.ng at isquare.com.au
Thu Apr 22 16:51:57 CEST 2004
Are you using the rpm version? I think it does not fully support accounting.
Maybe you have to compile from source and remember to uncomment
"DEFS+=-DSQL_ACC" in the modules/acc/Makefile.
Zeus
> -----Original Message-----
> From: serusers-bounces at lists.iptel.org
> [mailto:serusers-bounces at lists.iptel.org] On Behalf Of gaillac harry
> Sent: Friday, 23 April 2004 12:29 AM
> To: serusers at lists.iptel.org
> Subject: [Serusers] SERWEB+SER
>
>
> Here is my ser.cfg.SER don't start because of acc module
> anybody could help me to solved this problem before an other ?
>
> ser -c =>
> 0(6238) set_mod_param_regex: parameter <db_url> not found in
> module <acc>
> 0(6238) parse error (96,60-61): Can't set module parameter
> 0(6238) set_mod_param_regex: parameter <db_missed_flag> not
> found in module <acc>
> 0(6238) parse error (97,36-37): Can't set module parameter
> 0(6238) parse error (195,63-64): unknown command, missing loadmodule?
>
> ERROR: bad config file (3 errors)
>
> regards
>
>
> #
> # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> #
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no # (cmd line: -E)
>
> /* Uncomment these lines to enter debugging mode
> debug=9
> fork=yes
> log_stderror=yes
> */
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> listen=192.168.0.1
> children=4
> fifo="/tmp/ser_fifo"
> fifo_mode=0666
> #alias="example.com"
> # ------------------ module:wq loading
> ----------------------------------
>
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/lib/ser/modules/mysql.so"
>
> loadmodule "/usr/lib/ser/modules/sl.so"
> loadmodule "/usr/lib/ser/modules/tm.so"
> loadmodule "/usr/lib/ser/modules/rr.so"
> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/lib/ser/modules/domain.so"
> loadmodule "/usr/lib/ser/modules/usrloc.so"
> loadmodule "/usr/lib/ser/modules/registrar.so"
> loadmodule "/usr/lib/ser/modules/msilo.so"
> loadmodule "/usr/lib/ser/modules/vm.so"
> loadmodule "/usr/lib/ser/modules/acc.so"
>
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/lib/ser/modules/auth.so"
> loadmodule "/usr/lib/ser/modules/auth_db.so"
>
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
>
> #modparam("usrloc", "db_mode", 0)
>
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> modparam("usrloc", "db_mode", 1)
> #modparam("usrloc", "use_domain", 1)
>
> # --register params--
> modparam("registrar", "use_domain", 1)
>
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in
> this config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
>
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
>
> # --domain module--
> modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> modparam("domain", "db_mode", 1)
> modparam("domain", "domain_table", "domain")
> modparam("domain", "domain_col", "domain")
>
> # --msilo params--
> modparam("msilo", "registrar", "sip:registrar at example.com")
> modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")
>
> # --vm params--
> modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")
>
> # --acc params--
> modparam("acc", "log_level", 1)
> modparam("acc", "log_flag", 2)
> modparam("acc", "log_missed_flag", 2)
> modparam("acc", "log_fmt", "fimos")
> modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
> modparam("acc", "db_missed_flag", 2)
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
> route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (is_from_local()) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> if (!www_authorize("", "subscriber")) {
> www_challenge("", "0");
> break;
> };
>
> save("location");
> m_dump();
> break;
> };
>
> # native SIP destinations are handled using our
> USRLOC DB
> lookup("aliases");
> if (!lookup("location")) {
>
> if (method == "MESSAGE") {
> if (!t_newtran()) {
> sl_reply_error();
> break;
> };
>
> if (m_store("0")) {
> t_reply("202", "Accepted for Later Delivery");
> break;
> };
>
> t_reply("503", "Service Unavailable");
> break;
> };
> };
>
> if ((method=="INVITE" || method=="ACK")
> && t_newtran() ) {
> t_reply("404", "Not Found");
> route(3);
> break;
> };
>
> };
>
> setflag(2);
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> t_on_failure("1");
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> }
>
>
> route[3] {
>
> # non-Voip -- just send "off-line"
> if (!(method=="INVITE" || method=="ACK" ||
> method=="CANCEL")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> if (t_newtran()) {
> t_reply("404", "Not Found");
> acc_db_request("404 missed call",
> "missed_calls");
>
> };
> }
>
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>
More information about the sr-users
mailing list