[Serusers] SER+SERWEB

Atle Samuelsen clona at camaro.no
Thu Apr 22 15:37:30 CEST 2004


Uncommit it. and tail /var/log/messages and see what it complaints
about.. 


-Atle

* gaillac harry <gaillacharry at yahoo.fr> [040422 15:19]:
> Hi,
> 
> I agree you but if i uncomment this line SER don't start ???
> do you know configuring missed calls see route[3]?
> Regards
> 
> Le jeu 22/04/2004 ?? 15:09, Atle Samuelsen a ??crit :
> > #route[2] { should be route[2] {
> > 
> > - Atle (I have'nt tested your config, so if there are any other faults
> >   in it I dont know)
> > 
> > * gaillac harry <gaillacharry at yahoo.fr> [040422 14:00]:
> > > hi all,
> > > 
> > > Here is my ser.cfg. I try  to use send IM, missed calls and voicemail
> > > but i can't debug my ser.cfg
> > > 
> > > problems with route[2] and acc module in my ser.cfg.
> > > 
> > > 
> > > Anybody could help me to understand  ?
> > > 
> > > #
> > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> > > #
> > > # simple quick-start config script
> > > #
> > > 
> > > # ----------- global configuration parameters ------------------------
> > > 
> > > #debug=3         # debug level (cmd line: -dddddddddd)
> > > #fork=yes
> > > #log_stderror=no	# (cmd line: -E)
> > > 
> > > /* Uncomment these lines to enter debugging mode 
> > > debug=9
> > > fork=yes
> > > log_stderror=yes
> > > */
> > > 
> > > check_via=no	# (cmd. line: -v)
> > > dns=no           # (cmd. line: -r)
> > > rev_dns=no      # (cmd. line: -R)
> > > port=5060
> > > listen=192.168.0.1
> > > children=4
> > > fifo="/tmp/ser_fifo"
> > > fifo_mode=0666
> > > #alias="example.com"
> > > # ------------------ module:wq loading
> > > ----------------------------------
> > > 
> > > # Uncomment this if you want to use SQL database
> > > loadmodule "/usr/lib/ser/modules/mysql.so"
> > > 
> > > loadmodule "/usr/lib/ser/modules/sl.so"
> > > loadmodule "/usr/lib/ser/modules/tm.so"
> > > loadmodule "/usr/lib/ser/modules/acc.so"
> > > loadmodule "/usr/lib/ser/modules/rr.so"
> > > loadmodule "/usr/lib/ser/modules/maxfwd.so"
> > > loadmodule "/usr/lib/ser/modules/domain.so"
> > > loadmodule "/usr/lib/ser/modules/usrloc.so"
> > > loadmodule "/usr/lib/ser/modules/registrar.so"
> > > loadmodule "/usr/lib/ser/modules/msilo.so"
> > > loadmodule "/usr/lib/ser/modules/vm.so"
> > > 
> > > # Uncomment this if you want digest authentication
> > > # mysql.so must be loaded !
> > > loadmodule "/usr/lib/ser/modules/auth.so"
> > > loadmodule "/usr/lib/ser/modules/auth_db.so"
> > > 
> > > # ----------------- setting module-specific parameters ---------------
> > > 
> > > # -- usrloc params --
> > > 
> > > #modparam("usrloc", "db_mode",   0)
> > > 
> > > # Uncomment this if you want to use SQL database 
> > > # for persistent storage and comment the previous line
> > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > modparam("usrloc", "db_mode", 1)
> > > #modparam("usrloc", "use_domain", 1)
> > > 
> > > # --register params--
> > > modparam("registrar", "use_domain", 1)
> > > 
> > > # -- auth params --
> > > # Uncomment if you are using auth module
> > > #
> > > modparam("auth_db", "calculate_ha1", yes)
> > > #
> > > # If you set "calculate_ha1" parameter to yes (which true in this
> > > config), 
> > > # uncomment also the following parameter)
> > > #
> > > modparam("auth_db", "password_column", "password")
> > > 
> > > # -- rr params --
> > > # add value to ;lr param to make some broken UAs happy
> > > modparam("rr", "enable_full_lr", 1)
> > > 
> > > # --domain module--
> > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > modparam("domain", "db_mode", 1)
> > > modparam("domain", "domain_table", "domain")
> > > modparam("domain", "domain_col", "domain")
> > > 
> > > # --msilo params--
> > > modparam("msilo", "registrar", "sip:registrar at example.com")
> > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")
> > > 
> > > # --vm params--
> > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")
> > > 
> > > # --acc params--
> > > #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > #modparam("acc", "db_missed_flag", 3)
> > > 
> > > # -------------------------  request routing logic -------------------
> > > 
> > > # main routing logic
> > > 
> > > route{
> > > 
> > > 	# initial sanity checks -- messages with
> > > 	# max_forwards==0, or excessively long requests
> > > 	if (!mf_process_maxfwd_header("10")) {
> > > 		sl_send_reply("483","Too Many Hops");
> > > 		break;
> > > 	};
> > > 	if ( msg:len > max_len ) {
> > > 		sl_send_reply("513", "Message too big");
> > > 		break;
> > > 	};
> > > 
> > > 	# we record-route all messages -- to make sure that
> > > 	# subsequent messages will go through our proxy; that's
> > > 	# particularly good if upstream and downstream entities
> > > 	# use different transport protocol
> > > 	record_route();	
> > > 	# loose-route processing
> > > 	if (loose_route()) {
> > > 		t_relay();
> > > 		break;
> > > 	};
> > > 
> > > 	# if the request is for other domain use UsrLoc
> > > 	# (in case, it does not work, use the following command
> > > 	# with proper names and addresses in it)
> > > 	if (is_from_local()) {
> > > 
> > > 		if (method=="REGISTER") {
> > > 
> > > # Uncomment this if you want to use digest authentication
> > > 			if (!www_authorize("", "subscriber")) {
> > > 				www_challenge("", "0");
> > > 				break;
> > > 			};
> > > 
> > > 			save("location");
> > > 			m_dump();
> > > 			break;
> > > 		};
> > > 
> > > 		# native SIP destinations are handled using our USRLOC DB
> > > 		lookup("aliases");
> > > 		if (!lookup("location")) {
> > > 
> > > 			if (method == "MESSAGE") {
> > >        				route(2);
> > > 				break;
> > > 				};
> > > 
> > >      			if ((method=="INVITE" || method=="ACK") && t_newtran() ) {
> > >           		t_reply("404", "Not Found");
> > > 				route(3);
> > > 			  	break;
> > >         			};
> > > 		
> > > 		};
> > > 
> > > 	setflag(3);
> > >         # forward to current uri now; use stateful forwarding; that
> > >         # works reliably even if we forward from TCP to UDP
> > >         t_on_failure("1");	
> > > 	# forward to current uri now; use stateful forwarding; that
> > > 	# works reliably even if we forward from TCP to UDP
> > > 	if (!t_relay()) {
> > > 		sl_reply_error();
> > > 	};
> > > 
> > > }
> > > 
> > > #route[2] {
> > > 	if (method == "MESSAGE") {
> > >        		if (!t_newtran()) {
> > >             		sl_reply_error();
> > >             		break;
> > >         	};
> > > 
> > >         	if (m_store("0")) {
> > >             	t_reply("202", "Accepted for Later Delivery");
> > >             	break;
> > >         	};
> > >        	};
> > > }
> > > 
> > > route[3] { 
> > > 
> > > # non-Voip -- just send "off-line"
> > >    		 if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) {
> > >         		sl_send_reply("404", "Not Found");
> > >         		break;
> > >     		};
> > >     		if (t_newtran()) {
> > >          		t_reply("404", "Not Found");
> > > #            		acc_db_request("404 missed call", "missed_calls");  
> > > 
> > >     		};
> > > }
> > > 
> > 
> > > #
> > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> > > #
> > > # simple quick-start config script
> > > #
> > > 
> > > # ----------- global configuration parameters ------------------------
> > > 
> > > #debug=3         # debug level (cmd line: -dddddddddd)
> > > #fork=yes
> > > #log_stderror=no	# (cmd line: -E)
> > > 
> > > /* Uncomment these lines to enter debugging mode 
> > > debug=9
> > > fork=yes
> > > log_stderror=yes
> > > */
> > > 
> > > check_via=no	# (cmd. line: -v)
> > > dns=no           # (cmd. line: -r)
> > > rev_dns=no      # (cmd. line: -R)
> > > port=5060
> > > listen=192.168.0.1
> > > children=4
> > > fifo="/tmp/ser_fifo"
> > > fifo_mode=0666
> > > #alias="example.com"
> > > # ------------------ module:wq loading ----------------------------------
> > > 
> > > # Uncomment this if you want to use SQL database
> > > loadmodule "/usr/lib/ser/modules/mysql.so"
> > > 
> > > loadmodule "/usr/lib/ser/modules/sl.so"
> > > loadmodule "/usr/lib/ser/modules/tm.so"
> > > loadmodule "/usr/lib/ser/modules/acc.so"
> > > loadmodule "/usr/lib/ser/modules/rr.so"
> > > loadmodule "/usr/lib/ser/modules/maxfwd.so"
> > > loadmodule "/usr/lib/ser/modules/domain.so"
> > > loadmodule "/usr/lib/ser/modules/usrloc.so"
> > > loadmodule "/usr/lib/ser/modules/registrar.so"
> > > loadmodule "/usr/lib/ser/modules/msilo.so"
> > > loadmodule "/usr/lib/ser/modules/vm.so"
> > > 
> > > # Uncomment this if you want digest authentication
> > > # mysql.so must be loaded !
> > > loadmodule "/usr/lib/ser/modules/auth.so"
> > > loadmodule "/usr/lib/ser/modules/auth_db.so"
> > > 
> > > # ----------------- setting module-specific parameters ---------------
> > > 
> > > # -- usrloc params --
> > > 
> > > #modparam("usrloc", "db_mode",   0)
> > > 
> > > # Uncomment this if you want to use SQL database 
> > > # for persistent storage and comment the previous line
> > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > modparam("usrloc", "db_mode", 1)
> > > #modparam("usrloc", "use_domain", 1)
> > > 
> > > # --register params--
> > > modparam("registrar", "use_domain", 1)
> > > 
> > > # -- auth params --
> > > # Uncomment if you are using auth module
> > > #
> > > modparam("auth_db", "calculate_ha1", yes)
> > > #
> > > # If you set "calculate_ha1" parameter to yes (which true in this config), 
> > > # uncomment also the following parameter)
> > > #
> > > modparam("auth_db", "password_column", "password")
> > > 
> > > # -- rr params --
> > > # add value to ;lr param to make some broken UAs happy
> > > modparam("rr", "enable_full_lr", 1)
> > > 
> > > # --domain module--
> > > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > modparam("domain", "db_mode", 1)
> > > modparam("domain", "domain_table", "domain")
> > > modparam("domain", "domain_col", "domain")
> > > 
> > > # --msilo params--
> > > modparam("msilo", "registrar", "sip:registrar at example.com")
> > > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")
> > > 
> > > # --vm params--
> > > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")
> > > 
> > > # --acc params--
> > > #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
> > > #modparam("acc", "db_missed_flag", 3)
> > > 
> > > # -------------------------  request routing logic -------------------
> > > 
> > > # main routing logic
> > > 
> > > route{
> > > 
> > > 	# initial sanity checks -- messages with
> > > 	# max_forwards==0, or excessively long requests
> > > 	if (!mf_process_maxfwd_header("10")) {
> > > 		sl_send_reply("483","Too Many Hops");
> > > 		break;
> > > 	};
> > > 	if ( msg:len > max_len ) {
> > > 		sl_send_reply("513", "Message too big");
> > > 		break;
> > > 	};
> > > 
> > > 	# we record-route all messages -- to make sure that
> > > 	# subsequent messages will go through our proxy; that's
> > > 	# particularly good if upstream and downstream entities
> > > 	# use different transport protocol
> > > 	record_route();	
> > > 	# loose-route processing
> > > 	if (loose_route()) {
> > > 		t_relay();
> > > 		break;
> > > 	};
> > > 
> > > 	# if the request is for other domain use UsrLoc
> > > 	# (in case, it does not work, use the following command
> > > 	# with proper names and addresses in it)
> > > 	if (is_from_local()) {
> > > 
> > > 		if (method=="REGISTER") {
> > > 
> > > # Uncomment this if you want to use digest authentication
> > > 			if (!www_authorize("", "subscriber")) {
> > > 				www_challenge("", "0");
> > > 				break;
> > > 			};
> > > 
> > > 			save("location");
> > > 			m_dump();
> > > 			break;
> > > 		};
> > > 
> > > 		# native SIP destinations are handled using our USRLOC DB
> > > 		lookup("aliases");
> > > 		if (!lookup("location")) {
> > > 
> > > 			if (method == "MESSAGE") {
> > >        				route(2);
> > > 				break;
> > > 				};
> > > 
> > >      			if ((method=="INVITE" || method=="ACK") && t_newtran() ) {
> > >           		t_reply("404", "Not Found");
> > > 				route(3);
> > > 			  	break;
> > >         			};
> > > 		
> > > 		};
> > > 
> > > 	setflag(3);
> > >         # forward to current uri now; use stateful forwarding; that
> > >         # works reliably even if we forward from TCP to UDP
> > >         t_on_failure("1");	
> > > 	# forward to current uri now; use stateful forwarding; that
> > > 	# works reliably even if we forward from TCP to UDP
> > > 	if (!t_relay()) {
> > > 		sl_reply_error();
> > > 	};
> > > 
> > > }
> > > 
> > > route[2] {
> > > 	if (method == "MESSAGE") {
> > >        		if (!t_newtran()) {
> > >             		sl_reply_error();
> > >             		break;
> > >         	};
> > > 
> > >         	if (m_store("0")) {
> > >             	t_reply("202", "Accepted for Later Delivery");
> > >             	break;
> > >         	};
> > >        	};
> > > }
> > > 
> > > route[3] { 
> > > 
> > > # non-Voip -- just send "off-line"
> > >    		 if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) {
> > >         		sl_send_reply("404", "Not Found");
> > >         		break;
> > >     		};
> > >     		if (t_newtran()) {
> > >          		t_reply("404", "Not Found");
> > > #            		acc_db_request("404 missed call", "missed_calls");
> > > 
> > >     		};
> > > }
> > 
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> 
> 




More information about the sr-users mailing list