[Serusers] MySql Error

[Santosh]

Hello,
 
I am using the latest version of the SER (i.e. 0.8.12). I have also
installed MySQL and created the tables (using the ser_mysql.sh file). But
when I restart the SER, I get an error saying bad configuration file (5
errors). I am using the default configuration file with all the SQL module
lines uncommented. Is there some thing that I need to configure apart from
this for SER To use MySql? When I disable the SQL option, it works.
 
Thanks 
Santosh
 
Here is the configuration file:
 
 #
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
 
# ----------- global configuration parameters ------------------------
 
#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no    # (cmd line: -E)
 
/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/
 
check_via=no         # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
 
# ------------------ module loading ----------------------------------
 
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
 
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
 
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
 
# ----------------- setting module-specific parameters ---------------
 
# -- usrloc params --
 
#modparam("usrloc", "db_mode",   0)
 
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
 
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
 
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
 
# -------------------------  request routing logic -------------------
 
# main routing logic
 
route{
 
                # initial sanity checks -- messages with
                # max_forwards==0, or excessively long requests
                if (!mf_process_maxfwd_header("10")) {
                                sl_send_reply("483","Too Many Hops");
                                break;
                };
                if ( msg:len > max_len ) {
                                sl_send_reply("513", "Message too big");
                                break;
                };
 
                # we record-route all messages -- to make sure that
                # subsequent messages will go through our proxy; that's
                # particularly good if upstream and downstream entities
                # use different transport protocol
                record_route();       
                # loose-route processing
                if (loose_route()) {
                                t_relay();
                                break;
                };
 
                # if the request is for other domain use UsrLoc
                # (in case, it does not work, use the following command
                # with proper names and addresses in it)
                if (uri=~"^sip:[0-9]*@63.96.9.45") {
 
                                if (method=="REGISTER") {
 
# Uncomment this if you want to use digest authentication
#                                              if
(!www_authorize("iptel.org", "subscriber")) {
#
www_challenge("iptel.org", "0");
#                                                              break;
#                                              };
 
                                                save("location");
                                                break;
                                };
 
                                # native SIP destinations are handled using
our USRLOC DB
                                if (!lookup("location")) {
                                                sl_send_reply("404", "Not
Found");
                                                break;
                                };
                };
                # forward to current uri now; use stateful forwarding; that
                # works reliably even if we forward from TCP to UDP
                if (!t_relay()) {
                                sl_reply_error();
                };
 
}
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040414/96be16b8/attachment.htm>