[Serusers] Radius ser.cfg
William Farrgon
wgfarr at hotmail.com
Tue Apr 13 16:59:28 CEST 2004
Hello Jan,
I have solved the problems I was experiencing, basically I have started the
installation and configuration from scratch.
In the mean time I am expericing some problems the radius accounting.
I am receiving the stop acc packet as described in
http://iptel.org/ser/ser_radius.html, however I would like to receive the
Acct-Session-Time in my stop packet.
Is this possible ? I have installed radiusclient-0.3.2-0.rhel2.1.dag.
Thank you,
Regards,
Wilhelm
>From: Jan Janak <jan at iptel.org>
>To: William Farrgon<wgfarr at hotmail.com>
>CC: serusers at lists.iptel.org
>Subject: Re: [Serusers] Radius ser.cfg
>Date: Mon, 12 Apr 2004 22:25:11 +0200
>
>The problem is on line 66 of the configuration file. Try to replace
>if (len_gt(max_len))
>with
>if (msg:len > max_len)
>
>Note the following line in ser output:
>parse error (66,21-28): syntax error
>
>It tells you that the error is on line 66, columns 21-28.
>
> Jan.
>
>On 12-04 08:33, Wilhelm Farrugia wrote:
> > Hello,
> >
> > I am trying to install ser with radius support and i have followed the
> > instructions on:
> >
> > http://iptel.org/ser/ser_radius.html
> >
> > and this is my ser.cfg.
> >
> >
> > #
> > # ----------- global configuration parameters ------------------------
> > debug=3 # debug level (cmd line: -dddddddddd)
> > fork=no
> > log_stderror=yes # (cmd line: -E)
> > #/* Uncomment these lines to enter debugging mode
> > debug=7
> > fork=no
> > log_stderror=yes
> > #*/
> >
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> >
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > loadmodule "/usr/lib/ser/modules/mysql.so"
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> >
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > loadmodule "/usr/local/lib/ser/modules/acc.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> > loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
> >
> >
> > # ----------------- setting module-specific parameters ---------------
> >
> > # -- usrloc params --
> >
> > modparam("usrloc", "db_mode", 2)
> > modparam("auth_radius",
> > "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> > modparam("auth_radius", "service_type", 15)
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> > modparam("rr", "enable_full_lr", 1)
> > modparam("acc", "log_level", 1)
> > #modparam("acc", "radius_flag", 1)
> >
> > # ------------------------- request routing logic -------------------
> >
> > # main routing logic
> >
> > route{
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> > if (len_gt( max_len )) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> >
> >
> > # we record-route all messages -- to make sure that
> > # subsequent messages will go through our proxy; that's
> > # particularly good if upstream and downstream entities
> > # use different transport protocol
> > record_route();
> > # loose-route processing
> > if (loose_route()) {
> > t_relay();
> > break;
> > };
> >
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> >
> > if (method=="REGISTER") {
> >
> > log(1, "REGISTER: Authenticating user\n");
> >
> > if (!radius_www_authorize("")) {
> > log(1, "REGISTER: challenging user\n");
> > www_challenge("", "0");
> > break;
> > };
> > save("location");
> > break;
> > };
> >
> >
> > if (method=="INVITE") {
> >
> > log(1, "INVITE\n");
> > setflag(1); /* set for accounting (the same value as in
> > log_flag!) */
> > };
> >
> > if (method=="MESSAGE") {
> > log(1, "MESSAGE\n");
> > setflag(1); /* set for accounting (the same value as in
> > log_flag!) */
> > };
> >
> > if (method=="BYE" || method=="CANCEL") {
> > log (1, "BYE or CANCEL\n");
> > setflag(1);
> > };
> >
> >
> > }
> >
> >
> >
> > however when I start the ser server I receive this logging:
> >
> > 0(959) loading module /usr/lib/ser/modules/mysql.so
> > 0(959) loading module /usr/local/lib/ser/modules/sl.so
> > 0(959) loading module /usr/local/lib/ser/modules/tm.so
> > 0(959) loading module /usr/local/lib/ser/modules/rr.so
> > 0(959) loading module /usr/local/lib/ser/modules/maxfwd.so
> > 0(959) loading module /usr/local/lib/ser/modules/usrloc.so
> > 0(959) loading module /usr/local/lib/ser/modules/registrar.so
> > 0(959) loading module /usr/local/lib/ser/modules/auth.so
> > 0(959) loading module /usr/local/lib/ser/modules/acc.so
> > 0(959) loading module /usr/local/lib/ser/modules/auth_radius.so
> > 0(959) loading module /usr/local/lib/ser/modules/uri_radius.so
> > 0(959) set_mod_param_regex: usrloc matches module usrloc
> > 0(959) set_mod_param_regex: found <db_mode> in module usrloc
> > [/usr/local/lib/ser/modules/usrloc.so]
> > 0(959) set_mod_param_regex: auth_radius matches module auth_radius
> > 0(959) set_mod_param_regex: found <radius_config> in module auth_radius
> > [/usr/local/lib/ser/modules/auth_radius.so]
> > 0(959) set_mod_param_regex: auth_radius matches module auth_radius
> > 0(959) set_mod_param_regex: found <service_type> in module auth_radius
> > [/usr/local/lib/ser/modules/auth_radius.so]
> > 0(959) set_mod_param_regex: rr matches module rr
> > 0(959) set_mod_param_regex: found <enable_full_lr> in module rr
> > [/usr/local/lib/ser/modules/rr.so]
> > 0(959) set_mod_param_regex: acc matches module acc
> > 0(959) set_mod_param_regex: found <log_level> in module acc
> > [/usr/local/lib/ser/modules/acc.so]
> > 0(959) find_export: found <mf_process_maxfwd_header> in module
> > maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so]
> > 0(959) find_export: found <sl_send_reply> in module sl_module
> > [/usr/local/lib/ser/modules/sl.so]
> > 0(959) parse error (66,21-28): syntax error
> > 0(959) parse error (66,29-30): bad arguments
> > 0(959) find_export: found <sl_send_reply> in module sl_module
> > [/usr/local/lib/ser/modules/sl.so]
> > 0(959) find_export: found <record_route> in module rr
> > [/usr/local/lib/ser/modules/rr.so]
> > 0(959) find_export: found <loose_route> in module rr
> > [/usr/local/lib/ser/modules/rr.so]
> > 0(959) find_export: found <t_relay> in module tm
> > [/usr/local/lib/ser/modules/tm.so]
> > 0(959) find_export: found <radius_www_authorize> in module auth_radius
> > [/usr/local/lib/ser/modules/auth_radius.so]
> > 0(959) find_export: found <www_challenge> in module auth
> > [/usr/local/lib/ser/modules/auth.so]
> > 0(959) find_export: found <save> in module registrar
> > [/usr/local/lib/ser/modules/registrar.so]
> > ERROR: bad config file (2 errors)
> > 0(959) DEBUG: tm_shutdown : start
> > 0(959) DEBUG: tm_shutdown : empting hash table
> > 0(959) DEBUG: tm_shutdown: releasing timers
> > 0(959) DEBUG: tm_shutdown : removing semaphores
> > 0(959) DEBUG: tm_shutdown : done
> > 0(959) shm_mem_destroy
> > 0(959) destroying the shared memory lock
> >
> > Is there a good ser.cfg file available ?
> >
> > Thank you,
> > Regards,
> >
> > Wgfarr
> >
> > _________________________________________________________________
> > Protect your PC - get McAfee.com VirusScan Online
> > http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
_________________________________________________________________
It's fast, it's easy and it's free. Get MSN Messenger today!
http://www.msn.co.uk/messenger
More information about the sr-users
mailing list