[Serusers] Radius ser.cfg

[Jan Janak]

The problem is on line 66 of the configuration file. Try to replace
if (len_gt(max_len)) 
with 	
if (msg:len > max_len)

Note the following line in ser output:
parse error (66,21-28): syntax error

It tells you that the error is on line 66, columns 21-28.

   Jan.

On 12-04 08:33, Wilhelm Farrugia wrote:
> Hello,
> 
> I am trying to install ser with radius support and i have followed the 
> instructions on:
> 
> http://iptel.org/ser/ser_radius.html
> 
> and this is my ser.cfg.
> 
> 
> #
> # ----------- global configuration parameters ------------------------
> debug=3         # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
> #/* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> #*/
> 
> check_via=no # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
> 
> 
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> modparam("usrloc", "db_mode",   2)
> modparam("auth_radius", 
> "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> modparam("auth_radius", "service_type", 15)
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> modparam("acc", "log_level", 1)
> #modparam("acc", "radius_flag", 1)
> 
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> 
> route{
> # initial sanity checks -- messages with
>        # max_forwards==0, or excessively long requests
>        if (!mf_process_maxfwd_header("10")) {
>                sl_send_reply("483","Too Many Hops");
>                break;
>        };
>        if (len_gt( max_len )) {
>                sl_send_reply("513", "Message too big");
>                break;
>        };
> 
> 
> 
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
> 
> # if the request is for other domain use UsrLoc
>        # (in case, it does not work, use the following command
>        # with proper names and addresses in it)
> 
>        if (method=="REGISTER") {
> 
>                log(1, "REGISTER: Authenticating user\n");
> 
>                if (!radius_www_authorize("")) {
>                        log(1, "REGISTER: challenging user\n");
>                        www_challenge("", "0");
>                        break;
>                };
>                save("location");
>                break;
>        };
> 
> 
>        if (method=="INVITE") {
> 
>                log(1, "INVITE\n");
>                setflag(1); /* set for accounting (the same value as in
> log_flag!) */
>        };
> 
>        if (method=="MESSAGE") {
>                log(1, "MESSAGE\n");
>                setflag(1); /* set for accounting (the same value as in
> log_flag!) */
>        };
> 
>        if (method=="BYE" || method=="CANCEL") {
>                log (1, "BYE or CANCEL\n");
>                setflag(1);
>        };
> 
> 
> }
> 
> 
> 
> however when I start the ser server I receive this logging:
> 
> 0(959) loading module /usr/lib/ser/modules/mysql.so
> 0(959) loading module /usr/local/lib/ser/modules/sl.so
> 0(959) loading module /usr/local/lib/ser/modules/tm.so
> 0(959) loading module /usr/local/lib/ser/modules/rr.so
> 0(959) loading module /usr/local/lib/ser/modules/maxfwd.so
> 0(959) loading module /usr/local/lib/ser/modules/usrloc.so
> 0(959) loading module /usr/local/lib/ser/modules/registrar.so
> 0(959) loading module /usr/local/lib/ser/modules/auth.so
> 0(959) loading module /usr/local/lib/ser/modules/acc.so
> 0(959) loading module /usr/local/lib/ser/modules/auth_radius.so
> 0(959) loading module /usr/local/lib/ser/modules/uri_radius.so
> 0(959) set_mod_param_regex: usrloc matches module usrloc
> 0(959) set_mod_param_regex: found <db_mode> in module usrloc 
> [/usr/local/lib/ser/modules/usrloc.so]
> 0(959) set_mod_param_regex: auth_radius matches module auth_radius
> 0(959) set_mod_param_regex: found <radius_config> in module auth_radius 
> [/usr/local/lib/ser/modules/auth_radius.so]
> 0(959) set_mod_param_regex: auth_radius matches module auth_radius
> 0(959) set_mod_param_regex: found <service_type> in module auth_radius 
> [/usr/local/lib/ser/modules/auth_radius.so]
> 0(959) set_mod_param_regex: rr matches module rr
> 0(959) set_mod_param_regex: found <enable_full_lr> in module rr 
> [/usr/local/lib/ser/modules/rr.so]
> 0(959) set_mod_param_regex: acc matches module acc
> 0(959) set_mod_param_regex: found <log_level> in module acc 
> [/usr/local/lib/ser/modules/acc.so]
> 0(959) find_export: found <mf_process_maxfwd_header> in module 
> maxfwd_module [/usr/local/lib/ser/modules/maxfwd.so]
> 0(959) find_export: found <sl_send_reply> in module sl_module 
> [/usr/local/lib/ser/modules/sl.so]
> 0(959) parse error (66,21-28): syntax error
> 0(959) parse error (66,29-30): bad arguments
> 0(959) find_export: found <sl_send_reply> in module sl_module 
> [/usr/local/lib/ser/modules/sl.so]
> 0(959) find_export: found <record_route> in module rr 
> [/usr/local/lib/ser/modules/rr.so]
> 0(959) find_export: found <loose_route> in module rr 
> [/usr/local/lib/ser/modules/rr.so]
> 0(959) find_export: found <t_relay> in module tm 
> [/usr/local/lib/ser/modules/tm.so]
> 0(959) find_export: found <radius_www_authorize> in module auth_radius 
> [/usr/local/lib/ser/modules/auth_radius.so]
> 0(959) find_export: found <www_challenge> in module auth 
> [/usr/local/lib/ser/modules/auth.so]
> 0(959) find_export: found <save> in module registrar 
> [/usr/local/lib/ser/modules/registrar.so]
> ERROR: bad config file (2 errors)
> 0(959) DEBUG: tm_shutdown : start
> 0(959) DEBUG: tm_shutdown : empting hash table
> 0(959) DEBUG: tm_shutdown: releasing timers
> 0(959) DEBUG: tm_shutdown : removing semaphores
> 0(959) DEBUG: tm_shutdown : done
> 0(959) shm_mem_destroy
> 0(959) destroying the shared memory lock
> 
> Is there a good ser.cfg file available ?
> 
> Thank you,
> Regards,
> 
> Wgfarr
> 
> _________________________________________________________________
> Protect your PC - get McAfee.com VirusScan Online 
> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers